This is Module 3 of the Technology and Livelihood Education (TLE) Shielded Metal Arc Welding (SMAW) exploratory course for Grades 7 and 8, titled “Apply Safety Practices (OS).” It is a Quarter 1 self-learning module (Alternative Delivery Mode, First Edition 2020) from DepEd SOCCSKSARGEN Region, written by Salvador O. Balala. Learners study the hazards in a welding workplace, the personal protective equipment (PPE) that guards against them, and why following safety practices matters.
On this page 8 sections
What learners will learn
The module has two learning outcomes:
- LO 1: Evaluate hazard and risks (TLE_IAAW7/8OS-0f-2)
- LO 2: Control hazard and risks (TLE_IAAW7/8OS-0g-3)
By the end of the module, learners should be able to:
- Identify work hazards in the workplace.
- Demonstrate the use of PPE in the workplace.
- Enumerate the benefits of observing safety procedures in the workplace.
Occupational safety and health standards
The module starts with Occupational Safety and Health Standards (OSHS). These are mandatory rules and standards that are set and enforced to remove or reduce safety and health hazards at work. They aim to give every worker at least a minimum level of protection against injury, sickness, or death caused by their job. The module also reminds learners that SMAW welding can be dangerous and unhealthy if proper precautions are not taken.
The four kinds of workplace hazards
Physical hazards
These come from the transfer of energy between an object and a worker. Welders can be exposed to:
- Excessive noise, vibration, and radiation
- Inadequate lighting or ventilation
- Extreme temperature or pressure
- A cluttered work area
- Ignorance or carelessness of the worker
Chemical hazards
These come from breathing in chemical agents or touching them. The module names five forms:
- Mist: fine particles of liquid floating in the air
- Gases: substances that stay airborne at room temperature
- Vapor: forms when liquids evaporate
- Dust: solid substances that are ground, cut, or crushed
- Fumes: gas that condenses in air and becomes fine solid particles
Chemicals enter the body in four ways: inhalation (the most common and dangerous), ingestion, absorption through the skin, and injection (the least common but most direct).
Biological hazards
These are caused by living organisms such as insects, molds, fungi, viruses, and bacteria. They often come from poor sanitation, unsafe water, poor waste disposal, food handling, or personal cleanliness. The agents listed are bacteria, viruses, fungi, and rickettsia. Health problems include tuberculosis, tetanus, viral hepatitis, hepatitis B, HIV/AIDS, upper respiratory tract infection, and rabies.
Ergonomic hazards
These come from badly designed tools or work areas, improper lifting or reaching, poor visual conditions, or repeated motions in awkward positions. They cause fatigue, stress, and strain, and can lead to accidents. Effects include low productivity, more errors, wasted materials, and health problems such as musculoskeletal, vascular, visual, hearing, skin, and psychological problems.
Personal protective equipment
The module explains that employers must provide PPE together with instructions, policies, and training. The types it shows are:
- Uniforms
- Disposable aprons
- Gloves (people allergic to latex should be offered an alternative)
- Eye protection such as goggles
- Hearing guards such as ear defenders or earplugs
- Masks that cover the mouth and nose
Workers should be ready to show how to use any PPE their employer provides.
Benefits of following safety practices
- Protecting your staff: prevents common injuries like back pain, falls, slips and trips, asthma, and asbestos-related illness.
- Reducing absences: fewer work-related illnesses and injuries mean fewer days missed.
- Improving productivity: a safe workplace improves morale and output.
- Saving money: fewer absences and less hiring lower costs and raise profits.
How to use this module
The module follows the usual self-learning module parts:
- What I Know: a 15-item multiple-choice pretest. Answer it before anything else.
- What’s In: a short introduction with a welding photo to spot hazards and safety precautions.
- What’s New (Activity 1): match PPE pictures with their descriptions, then identify the type of hazard in five situations.
- What is It (Activity 2): guide questions on welding hazards, safe work practices, and safety benefits, followed by the main discussion.
- What’s More (Activity 3): true or false items and naming pictured PPE.
- What I Have Learned (Activity 4) and What I Can Do (Activity 5): written answers on welding hazards, precautions, and how to handle an unsafe situation at work.
- Assessment: a 15-item post-test.
- Additional Activities (Activity 6): a word search for ten hazards and PPE.
Learners: write all answers on a separate sheet of paper, do not mark the module, check your work honestly with the answer key, and return the module to your teacher when done.
Parents: help your child go through the parts in order and remind them to finish each task before moving on.
Teachers: the Notes to the Teacher stress that hazards can be controlled in many ways and that the goal is to keep workers from being exposed to them. Some answer key entries are printed out of order, so review them before learners self-check.
Frequently asked questions
What grade and quarter is this SMAW module for?
It is for TLE Shielded Metal Arc Welding in Grades 7 and 8, and its code marks it as a Quarter 1 module (Module 3).
What are the four types of hazards discussed in the module?
Physical, chemical, biological, and ergonomic hazards. Each one is defined with examples relevant to welding work.
Does the module have an answer key?
Yes. It includes answers for the pretest, Activities 1, 3, and 6, and the post-test, though some entries are printed out of order and should be checked.
What PPE does the module cover?
Uniforms, disposable aprons, gloves, goggles, earplugs or ear defenders, and masks. The activities also mention leather aprons, leather gloves, and shielded helmets.
What is the most common route of entry for chemical hazards?
Inhalation, or breathing in toxins, which the module calls the most common and dangerous route.
Full text of the module
The text below is a transcription of the PDF above, as printed.
TLE (SMAW) Module 3: APPLY SAFETY PRACTICES (OS)
[illustration: students reading and studying at a tree, a teacher with students at a desk, and a child reading by lamplight, with a globe]
CO_Q1_TLE-SMAW 7/8_ Module 3
TLE SMAW – Grade 7/8 Alternative Delivery Mode Module 3: APPLY SAFETY PRACTICES (OS) First Edition, 2020
Republic Act 8293, section 176 states that: No copyright shall subsist in any work of the Government of the Philippines. However, prior approval of the government agency or office wherein the work is created shall be necessary for exploitation of such work for profit. Such agency or office may, among other things, impose as a condition the payment of royalties.
Borrowed materials (i.e., songs, stories, poems, pictures, photos, brand names, trademarks, etc.) included in this module are owned by their respective copyright holders. Every effort has been exerted to locate and seek permission to use these materials from their respective copyright owners. The publisher and authors do not represent nor claim ownership over them.
Published by the Department of Education Secretary: Leonor Magtolis Briones Undersecretary: Diosdado M. San Antonio
Development Team of the Module
Writers: Salvador O. Balala Editors: Jose Joel B. Moso, Isidro L. Dagum Jr., Rachelle Ann Mateo, Raleigh Ojanola, Jessica Palma, Ian Kith Parcon and Kent Corpuz Reviewers: Evelyn C. Frusa PhD, Grace J. Miravalles, Rolex H. Lotilla and Arvin Tejada Illustrator: John Lester B. Escalera / Jed Batisanan Layout Artist: Precious Joy A. Ubas Management Team: Allan G. Farnazo, CESO IV – Regional Director Gilbert B. Barrera – Chief, CLMD Arturo D. Tingson Jr. – REPS, LRMS Peter Van C. Ang-ug – REPS – ADM Coordinator Belen Fajemolin, Ph.D. – CID Chief Evelyn C. Frusa, Ph.D – EPS In Charge of LRMS Bernardita M. Villano – ADM Coordinator
Printed in the Philippines by Department of Education – SOCCSKSARGEN Region
Office Address: Regional Center, Brgy. Carpenter Hill, City of Koronadal Telefax: (083) 2288825/ (083) 2281893 E-mail Address: region12@deped.gov.ph
Introductory Message
This Self-Learning Module (SLM) is prepared so that you, our dear learners, can continue your studies and learn while at home. Activities, questions, directions, exercises, and discussions are carefully stated for you to understand each lesson.
Each SLM is composed of different parts. Each part shall guide you step-by-step as you discover and understand the lesson prepared for you.
Pre-test are provided to measure your prior knowledge on lessons in each SLM. This will tell you if you need to proceed on completing this module, or if you need to ask your facilitator or your teacher’s assistance for better understanding of the lesson. At the end of each module, you need to answer the post-test to self-check your learning. Answer keys are provided for each activity and test. We trust that you will be honest in using these.
In addition to the material in the main text, Notes to the Teachers are also provided to the facilitators and parents for strategies and reminders on how they can best help you on your home-based learning.
Please use this module with care. Do not put unnecessary marks on any part of this SLM. Use a separate sheet of paper in answering the exercises and tests. Read the instructions carefully before performing each task.
If you have any questions in using this SLM or any difficulty in answering the tasks in this module, do not hesitate to consult your teacher or facilitator.
Thank you.
The following are some reminders in using this module:
- Use the module with care. Do not put unnecessary mark/s on any part of the module. Use a separate sheet of paper in answering the exercises.
- Don’t forget to answer What I Know before moving on to the other activities included in the module.
- Read the instruction carefully before doing each task.
- Observe honesty and integrity in doing the tasks and checking your answers.
- Finish the task at hand before proceeding to the next.
- Return this module to your teacher/facilitator once you are through with it.
If you encounter any difficulty in answering the tasks in this module, do not hesitate to consult your teacher or facilitator. Always bear in mind that you are not alone.
We hope that through this material, you will experience meaningful learning and gain deep understanding of the relevant competencies. You can do it!
What I Need to Know
This module was designed and written with you in mind. It is here to help you master the Apply Safety Practices. The scope of this module permits it to be used in many different learning situations. The language used recognizes the diverse vocabulary level of students. The lessons are arranged to follow the standard sequence of the course. But the order in which you read them can be changed to correspond with the textbook you are now using.
This module is divided into two learning outcomes, namely:
- LO 1 – Evaluate hazard and risks (TLE_IAAW7/8OS-0f-2)
- LO 2 – Control hazard and risks (TLE_IAAW7/8OS-0g-3);
OBJECTIVES:
- Identify work hazards in the workplace;
- Demonstrate the use of PPE in the workplace and
- Enumerate the benefits of observing safety procedure in the workplace.
What I Know
Pre-Test
Let us determine how much you already know about the hazards and risks.
Direction: Select the letter of the correct answer.
What mandatory rules and standards set and enforced to eliminate or reduce occupational safety and health hazards in the workplace?
a. Hazard Identification
b. Risk Assessment
c. Occupational Safety and Health Standard
d. Risk ControlWhat is a situation in the workplace that has the potential to harm the health and safety of people or to damage the plant and equipment?
a. Hazard
b. Risk
c. Control
d. AssessmentWhat hazard is due to the transfer of energy between an object and a worker?
a. Electrical Hazard
b. Chemical Hazard
c. Physical Hazard
d. Biological HazardThe following are the example of physical hazard except:
a. Excessive noise levels
b. Radiation
c. Vibration
d. exposed power cableThe following are the example of biological hazard except:
a. Fungi
b. Bacteria
c. fumes
d. VirusThe following are the example of ergonomic hazard except:
a. Love problem
b. Skin problem
c. visual problem
d. hearing problemPeople who work with animals, animal products or animal wastes have a greater risk of infection because of______________.
a. Chemical hazards
b. Physical hazards
c. Biological hazards
d. Ergonomics hazardsImpact resulting from being struck by and struck against objects may cause serious accidents which one is referred to?
a. Chemical hazards
b. Physical hazards
c. Biological hazards
d. Ergonomics hazardsWhich kind of hazard causes the deadening of a welder’s hand because of an unadvisable position during welding?
a. Physical hazard
b. Chemical hazard
c. Biological hazard
d. Ergonomics hazardSafety standards are mandatory rules set and enforced to eliminate or reduce?
a. welding defects
b. welding injuries
c. welding problems
d. hazards in the workplaceWhy do we use earplug?
a. for engineering and administrative control
b. for workers to look fashionable
c. to match the glasses and hairstyle of workers
d. to avoid hearing damageWhat is the main purpose of wearing eye protection?
a. Keep clean and be in good condition
b. Be capable of being disinfected
c. Fit snugly without the interference of eye movement
d. Provide adequate protection against hazardsWhat benefits of health and safety guidelines is primarily to guard employers and their staff from injury, and illness?
a. Protecting your staff
b. Reducing absences
c. Improving productivity
d. Saving moneyWhat benefits do your colleagues and employees are ready to add a secure environment, this may improve morale and overall productivity?
a. Protecting your staff
b. Reducing absences
c. Improving productivity
d. Saving moneyWhich of the following is not a Personal Protective Equipment in SMAW?
a. Leather apron
b. Leather gloves
c. Welding rod
d. Shielded helmet
Apply Safety Practices (OS)
Occupational Safety and Health Standards (OSHS) are mandatory rules and standards set and enforced to eliminate or reduce occupational safety and health hazards in the workplace.
OSH Standards aim to provide at least the minimum acceptable degree of protection that must be granted to every worker in relation to dangers of injury, sickness, or death that may arise by reason of his or her occupation. The provision of OSHS by the government is an exercise of police power, with the intention of promoting the welfare and well-being of workers.
What’s In
SMAW welding, like other welding methods, is often a dangerous and unhealthy practice if proper precautions aren’t taken. In this module, we discuss the occupational health and safety practices of workers in industries. Given the illustration below, can you spot the safety and hazard precaution in the workplace?
[photo: welder working with sparks flying, wearing gloves and a helmet]
Figure 1: Welding Hazard and safety precautions Source: High Speed Training
Notes to the Teacher
- Occupational hazards can be controlled by a variety of methods.
- The goal of controlling hazards is to prevent workers from being exposed to occupational hazards.
- It is important to recognize hazards and health and safety problems in the workplace.
What’s New
Activity 1
A. Direction: Match the pictures with the correct description of personal protective equipment.
| No. | Picture | Letter | Description |
|---|---|---|---|
| 1. | [illustration: leather apron] | a. | Shielded Helmet – provide eye protection from radiation, impact and scratches. |
| 2. | [illustration: pair of leather gloves] | b. | It is used when grinding and chipping off slag. |
| 3. | [illustration: welding helmet] | c. | It is a pair of device that is meant to be inserted in the ear canal to protect the wearer’s ears from loud noise or intrusion. |
| 4. | [illustration: safety goggles] | d. | It is very effective in protecting the skin from extremely hot temperatures. |
| 5. | [illustration: earplugs with cord] | e. | It is a durable material made from pigskin or cowshide, provides high task is involved. [transcriber’s note: the printed text of this description is incomplete as printed; “provides high task is involved” is reproduced as it appears] |
transcriber’s note: the opening lines continue from earlier pages, so this page’s heading structure is partial.
B. Direction: Identify what hazard is being illustrated in the situation below. Choose your answer inside the box.
[transcriber’s note: the four choices are printed in a box]
- Physical Hazard
- Chemical Hazard
- Biological Hazard
- Ergonomic Hazard
_____ 1. Ignorance or carelessness of the worker _____ 2. Diseases caused by virus _____ 3. Health Problems caused by Ergonomics _____ 4. Mist Fine particles of a liquid float in air _____ 5. Psychological problems
What is It
Activity 2
Guide Questions: Answer the following questions and write your answer in your activity notebook.
What are some health and safety hazards related to being a welder?
What are some general safe work practices to know as a welder?
What are the benefits of observing safety procedures in the workplace?
Environmental Hazards
Welding may be a manufacturing industry where workers might be exposed to many hazards. Industrial safety and health problems are getting major challenges in industries due to low occupational hazards awareness, lack of workplace safety and health policy, and inefficient safety management systems. Here is such information on the way to prevent hazards and risks within the workplace.
1. Physical Hazards. Hazards due to the transfer of energy between an object and a worker. Welders can be exposed to
- Excessive noise levels
- Inadequate illumination
- Extreme temperature
- Extreme pressure
- Vibration
- Radiation
- Inadequate ventilation
- Cluttered area
- Ignorance or carelessness of the worker
2. Chemical Hazards. These hazards arise from inhaling chemical agents in the form of vapor gases, dust, fumes, mist, or by skin contact with these materials.
- Mist Fine particles of a liquid float in the air
- Gases- substances in gaseous state but are always airborne at room temperature.
- Vapor- results when substances that are liquid at room temperature evaporate.
- Dust- solid harmful substances are ground, cut or crushed by mechanical actions.
- Fumes- gas is condensed in air, chemically changed and becomes fine solid particles that float in air.
Four Possible Routes of Entry of Chemical Hazards
- Inhalation- breathing in toxins is the most common and dangerous route.
- Ingestion- toxins enter through the gastrointestinal tract.
- Absorption- toxins pass through the skin into the bloodstream.
- Injection- toxins may be injected into the body (needles, etc.)- the least common, yet most direct route of entry
3. Biological Hazards. Hazards caused by living organisms which include insects, molds, fungi, viruses, and bacterial contamination; from defects in sanitation and housekeeping procedures, such as in the provision of potable water, removal of industrial wastes and sewage, food handling, and personal cleanliness.
Agents of Biological Hazards
- Bacteria – simple, one-celled organisms that may or may not be harmful.
- Viruses – organisms that depend on a host cell for development or reproduction
- Fungi – may be small or large parasitic organisms growing in a living or dead plant or animal
- Rickettsia – rod-shaped microorganisms that are smaller than bacteria and depend on a host for development or reproduction. Microorganisms transmitted by fleas, ticks, and lice
Common Health Problems from Biological Hazards
- Tuberculosis (TB)
- Tetanus
- Viral Hepatitis
- HIV/AIDS
- Diseases caused by virus
- Upper Respiratory Tract Infection
- Hepatitis B Infection
- Acquired Immunodeficiency Syndrome (AIDS)
- Rabies
4. Ergonomic Hazards. Hazards commonly seen in the workplace, which are improperly designed tools or work areas, improper lifting or reaching, poor visual conditions or repeated motions in an awkward position that may be responsible for fatigue, stress and strain and may lead to accidents in the occupational environment. Ergonomics is the study of designing equipment and devices that fit the workers
Effects of Ergonomic Hazards
- low productivity
- high rate of errors
- material wastage and equipment
- Health Problems caused by Ergonomics
- musculoskeletal problems
- vascular problems
- visual problems
- hearing problems
- skin problem
- psychological problems
Your employer must provide you with Personal Protective Equipment (PPE) also as instruction, policies, procedures, and training in order so that you’ll perform your job role safely.
There are many types of PPE including:
1. Uniforms
[illustration: PPE uniform, one-piece work garment]
Figure 2: PPE Uniform
2. Disposable aprons
[illustration: disposable apron]
Figure PPE Disposable Aprons
3. Disposable gloves – people that are allergic to latex gloves should be offered an alternative.
[illustration: pair of leather welding gloves]
Figure 3: PPE Disposable gloves
4. Eye protection such as goggles
[illustration: goggles]
Figure 4: Goggles
5. Hearing guards such as ear defenders or Earplugs
[illustration: earplugs attached to a cord]
Figure 5: Earplugs
6. Masks to shield the mouth and nose to prevent infection via respiration
[illustration: dust mask]
Figure 6: dust mask
You should be ready to demonstrate the way to use any PPE provided by your employer in line with their agreed ways of working.
What are the advantages of following health and safety practices?
There are numerous benefits of following health and safety practices within the workplace, and everyone benefits are based around employers having a requirement of look after their employees and anyone else who could also be on their premises.
Benefit 1 – Protecting your staff
Following health and safety guidelines is primarily to guard employers and their staff from injury, illness, or coming into the other sort of harm within the workplace. One of the most benefits of following health and safety practices is to stop common workplace injuries like back pain, falling from a height, asthma, injuries from slips and trips, and asbestos-related illness.
Benefit 2 – Reducing absences
Following health and safety guidelines and maintaining a secure workplace will reduce the danger of work-related illnesses and injuries, and thus reduce staff absences. Employers therefore also economize on the direct costs of absences, like paying salaries.
Benefit 3 – Improving productivity
If your colleagues and employees are ready to add a secure environment, this may improve morale and overall productivity.
Benefit 4 – Saving money
By maintaining health and safety practices within the workplace, and thus reducing absences and improving productivity, you’ll be saving money by retaining staff. The money spent on absences and recruitment processes will decrease, and therefore the business’ profits will increase.
What’s More
Activity 3
A. TRUE OR FALSE: Read and analyze each statement below. Write TRUE if the statement is correct and FALSE if the statement is incorrect on the space provided.
_____ 1. Biological Hazards is due to the transfer of energy between an object and a worker.
_____ 2. Physical Hazards is caused by living organisms which include insects, molds, fungi, viruses, and bacterial contamination; from defects in sanitation and housekeeping procedures, such as in the provision of potable water, removal of industrial wastes and sewage, food handling, and personal cleanliness.
_____ 3. Ergonomic Hazards commonly seen in the workplace, which are improperly designed tools or work areas, improper lifting or reaching, poor visual conditions or repeated motions in an awkward position that may be responsible for fatigue.
_____ 4. Following health and safety guidelines and maintaining a secure workplace will reduce the danger of work-related illnesses and injuries.
_____ 5. One of the most benefits of following health and safety practices is to stop common workplace injuries.
B. Identify what PPE is being illustrated below?
_____________________ 1. [photo: pair of leather welding gloves] _____________________ 4. [photo: goggles]
_____________________ 2. [photo: disposable apron] _____________________ 5. [photo: earplugs attached to a cord]
_____________________ 3. [photo: dust mask]
What I Have Learned
Activity 4
You are about to complete this module; I am sure you may able to answer the following questions:
What are the hazards of welding?
What are the safety precautions used in welding and its personal protective equipment?
Why is safety important in welding?
What I Can Do
Activity 5
Suppose to be you are a welder and you are in a workplace. Describe one unsafe situation you might find at work situation.
What if there is someone injured or health problem could result hazardous in your workplace? What will you do?
How can you prevent an unsafe working condition?
Assessment
Post-Test
Let us determine how much you already know about the hazards and risks.
Direction: Select the letter of the correct answer.
What mandatory rules and standards set and enforced to eliminate or reduce occupational safety and health hazards in the workplace?
a. Hazard Identification
b. Risk Assessment
c. Occupational Safety and Health Standard
d. Risk ControlWhat is a situation in the workplace that has the potential to harm the health and safety of people or to damage the plant and equipment?
a. Hazard
b. Risk
c. Control
d. AssessmentWhat hazard is due to the transfer of energy between an object and a worker?
a. Electrical Hazard
b. Chemical Hazard
c. Physical Hazard
d. Biological HazardThe following are the example of physical hazard except:
a. Excessive noise levels
b. Radiation
c. Vibration
d. exposed power cableThe following are the example of biological hazard except:
a. Fungi
b. Bacteria
c. fumes
d. VirusThe following are the example of ergonomic hazard except:
a. Love problem
b. Skin problem
c. visual problem
d. hearing problemPeople who work with animals, animal products or animal wastes have a greater risk of infection because of______________.
a. Chemical hazards
b. Physical hazards
c. Biological hazards
d. Ergonomics hazardsImpact resulting from being struck by and struck against objects may cause serious accidents which one is referred to?
a. Chemical hazards
b. Physical hazards
c. Biological hazards
d. Ergonomics hazardsWhich kind of hazard causes the deadening of a welder’s hand because of an unadvisable position during welding?
- a. Physical hazard
- b. Chemical hazard
- c. Biological hazard
- d. Ergonomics hazard
- Which safety standards are mandatory rules set and enforced to eliminate or reduced?
- a. welding defects
- b. welding injuries
- c. welding problems
- d. Ergonomics hazard
- Why do we use earplug?
- a. for engineering and administrative control
- b. for workers to look fashionable
- c. to match the glasses and hairstyle of workers
- d. to avoid hearing damage
- What is the main purpose of wearing eye protection?
- a. Keep clean and be in good condition
- b. Be capable of being disinfected
- c. Fit snugly without the interference of eye movement
- d. Provide adequate protection against hazards
- What benefits of health and safety guidelines is primarily to guard employers and their staff from injury, and illness?
- a. Protecting your staff
- b. Reducing absences
- c. Improving productivity
- d. Saving money
- What benefits do your colleagues and employees are ready to add a secure environment, this may improve morale and overall productivity?
- a. Protecting your staff
- b. Reducing absences
- c. Improving productivity
- d. Saving money
- Which of the following is not a Personal Protective Equipment in SMAW?
- a. Leather apron
- b. Leather gloves
- c. Welding rod
- d. Shielded helmet
Additional Activities
Activity 6
Tools word search. Find the ten (10) common hazards encountered by a welder and its personal protective equipment.
| G | L | O | V | E | S | R | E | D | M | S | S |
|---|---|---|---|---|---|---|---|---|---|---|---|
| H | A | A | P | R | O | N | S | X | M | S | P |
| L | C | L | L | G | U | L | P | R | A | E | H |
| D | I | K | G | O | O | G | L | E | S | S | Y |
| C | G | G | H | N | E | S | R | S | K | S | S |
| V | O | R | Y | O | D | F | R | S | W | S | I |
| I | L | J | E | M | C | F | G | S | S | W | C |
| R | O | U | N | I | F | O | R | M | S | S | A |
| I | I | H | K | C | H | E | M | I | C | A | L |
| J | B | A | L | J | L | O | Y | B | K | O | G |
Answer Key
[transcriber’s note: the answer key is printed in five boxes whose columns run out of order; the text is given box by box, in the order it appears on the page]
PRETEST
- .15 C
- .14 C
- .13 A
- .12 D
- .11 D
- .10 A C .5
- .9 D D .4
- A.8 C .3
- C.7 A .2
- .6 A C .1
ACTIVITY 1
- .5 Ergonomic hazard
- .4 Chemical hazard
- .3 Ergonomic hazard
- .2 Biological hazard
- .1 Physical hazard
- .B
- C .5
- B .4
- A .3
- D .2
- E .1
ACTIVITY 3
- .5 earplug googles.4
- apron.3
- gloves.2
- mask.1
- B.
- .5 true
- .4 true
- .3 false
- .2 false
- .1 false
- A.
POST TEST
- .15 C
- .14 C
- .13 A
- .12 D
- .11 D
- .10 A C .5
- .9 D D .4
- A.8 C .3
- C.7 A .2
- .6 A C .1
ACTIVITY 6
- UNIFORM
- EARPLUG
- ERGONOMIC
- BIOLOGICAL
- CHEMICAL
- PHYSICAL
- GOOGLES
- APRON
- MASK
- GLOVES
References
American Welding Society Education Department. (1999). Welding inspection technology. Miami, FL.
Jeffus, larry, & V, H. (n.d.). Welding Principles and Application.
Kennedy, G. A. (n.d.). Welding Technology (second edition).
“Shielded Metal Arc Welding.” Wikipedia. Wikimedia Foundation, May 17, 2020. https://en.wikipedia.org/wiki/Shielded_metal_arc_welding.
(n.d.). Retrieved June 12, 2020, from https://www.google.com/search?q=smaw hazards workplace&tbm=isch&ved=2ahUKEwjZpN6B6fvpAhUBbJQKHRoBD8Q2-cCegQIABAA&oq=smaw hazards workplace&gs_lcp=
“Home.” ANSWERS FOR HEALTH AND SOCIAL CARE. Accessed June 12, 2020. https://dsdweb.co.uk/level-2-diploma-in-care/health-safety-and-well-being-in-care-settings/demonstrate-the-use-of-personal-protective-equipment-ppe-and-when-to-use-it/.
Accessed June 12, 2020. https://www.google.com/search?q=smaw hazards
For inquiries or feedback, please write or call:
Department of Education – Bureau of Learning Resources (DepEd-BLR)
Ground Floor, Bonifacio Bldg., DepEd Complex Meralco Avenue, Pasig City, Philippines 1600
Telefax: (632) 8634-1072; 8634-1054; 8631-4985
Email Address: blr.lrqad@deped.gov.ph * blr.lrpd@deped.gov.ph
Leave a Reply