This is a Self-Learning Module (SLM) for Technology and Livelihood Education (TLE), Shielded Metal Arc Welding (SMAW), Grades 7/8, Quarter 1, Module 1: Use Basic Hand Tools and Equipment (UT). It is an exploratory course that leads to the SMAW National Certificate Level II (NC II). After working through it, learners can name the basic hand tools, materials, and equipment used in SMAW and use them for the right jobs.
The module was written by James Aldrin S. Estabillo and published by DepEd SOCCSKSARGEN Region (Region XII) as an Alternative Delivery Mode (ADM) material, First Edition, 2020.
On this page 6 sections
What learners will learn
The module covers two common competencies:
- Preparing hand tools before the actual servicing activities
- Using appropriate hand tools for a specific job
By the end of the lesson, learners are expected to:
- Identify the different basic hand tools, materials, and equipment used in Shielded Metal Arc Welding.
- Manipulate the tools and materials in a job or task according to their uses. (TLE_IAAW7/8UT-Oa-I)
Why hand tools matter in metal works
The module explains that buildings and infrastructure depend on metal works, so the construction industry needs skilled metal workers such as welders. A welder is a tradesperson who fuses materials and puts together metal parts. A hand tool is any tool powered by hand rather than by a motor. Basic hand tools are needed whenever repair or servicing is done in this field.
SMAW tools and equipment by type
The main lesson (What is It) groups the tools by what they do. Here is a summary using the module’s own descriptions.
Measuring tools
These measure the size of an object or a piece of metal.
| Tool | What it does |
|---|---|
| Pull-push rule | A flexible rule that supports itself when extended and can measure curved, irregular surfaces. The blade is typically 1/2 inch wide and 72 inches long. |
| Steel tape | Like a steel tape rule, 3/8 inch wide, available in lengths from 25 to 100 feet. |
| Steel rule | The most common tool in the tool room. It is made of tempered steel, usually 6 to 12 inches long. |
| Try square | Measures the squareness of an object. |
| Combination square | Combines 45 degree and 90 degree angles with a protractor. |
| Micrometer caliper | Measures dimensions in thousandths of an inch. |
| Vernier caliper | Measures inside and outside diameters and the depth of holes and slots. |
| Dividers | Measure or set distances and lay out arcs and circles. |
Cutting tools
- Hacksaw: a toothed cutter with a solid or adjustable frame. Its main parts are the handle, blade, tightening screw, and nuts.
- Files: hardened, tempered steel with rows of teeth that shape and finish metal and smooth rough edges.
- Chisel: a wedge-shaped tool used to shear, cut, and chip metal.
- Scraper: removes points, burrs, and sharp edges from metal surfaces.
Marking tools
- Punches: make permanent marks on the surface of metal.
Driving tools
- Ball peen hammer: for straightening, bending, and shaping metal. It also strikes cold chisels and punches.
- Chipping hammer: removes slag from the weld. One face is tapered and the other is round-pointed.
- Wrench: loosens and tightens light and heavy nuts and bolts.
- Screwdriver: tightens and loosens screws by turning them.
Holding tools
- Toolmaker clamp (also called a parallel clamp): holds small parts at the bench or machine.
- C-clamp: an all-purpose clamp.
- Drill vise: a sturdy steel vise with a movable jaw.
- Machinist vise: holds work during machining.
- Hand vise: holds metal stock for small machining jobs.
- Vise-grip: grips the stock tightly.
- Tong: holds metal securely while it is being forged.
- Pliers: hold, cut, and twist wires.
Welding equipment
- Electrode holder: holds the electrode and directs current through it to form the arc. It should be well insulated and free from defects.
- Welding machine: the main part of the SMAW process. Welding cannot be done without it.
- Welding rod or electrode: has a metal core that melts into the base metal and a flux coating that turns into a gas shield as it burns.
How to use this module
The module follows the usual SLM parts:
- What I Know: a 10-item pretest. Answer it first.
- What’s In and What’s New: Activity 1 is a matching type where learners pair tool names with pictures.
- What is It: the lesson on tools by type.
- Activity 2: guide questions about tools seen in the community and why they are useful.
- What’s More: Activity 3, where learners name the tool that is described.
- What I Have Learned: a fill-in-the-blank exercise using a word box.
- What I Can Do: a task about repairing a damaged metal fence on a tight budget. Learners choose the tools and materials and explain their choices.
- Assessment: a 10-item post-test.
- Additional Activities: a word search of ten tools.
For learners: Write all answers in your activity notebook or on a separate sheet, not on the module. Finish each task before moving to the next. Check your work honestly with the answer key. Return the module to your teacher when you are done.
For parents: Help your child follow the order of the parts. If a task is hard, encourage them to ask the teacher or facilitator.
For teachers: An answer key for the pretest, activities, and post-test is at the end of the module. Review pretest and post-test items 3 and 5 before using them. Item 3 describes a file and item 5 describes a hacksaw, but neither tool appears among the choices for those items, so the printed keys (D and A) may confuse learners.
Frequently asked questions
What grade and quarter is this SMAW module for?
It is TLE SMAW for Grades 7/8, Quarter 1, Module 1. The competency code printed is TLE_IAAW7/8UT-Oa-I.
What does SMAW mean?
SMAW stands for Shielded Metal Arc Welding. This exploratory module leads to the SMAW National Certificate Level II (NC II).
What tool types does the module cover?
It covers measuring, cutting, marking, driving, and holding tools, plus welding equipment: the electrode holder, welding machine, and welding rod or electrode.
Does the module have an answer key?
Yes. It has answers for the pretest, Activity 1, Activity 3, What I Have Learned, the post-test, and the word search.
What is a chipping hammer used for?
The module says a chipping hammer removes slag from the weld. It has two faces: one tapered and one round-pointed.
Full text of the module
The text below is a transcription of the PDF above, as printed.
TLE (SMAW) Module 1: USE BASIC HAND TOOLS AND EQUIPMENT (UT)
7/8
[illustration: students of different ages learning outdoors and at home, with a teacher, a globe, and a lamp]
CO_Q1_TLE-SMAW 7/8_ Module 1
GOVERNMENT PROPERTY NOT FOR SALE
TLE SMAW – Grade 7 Alternative Delivery Mode Module 1: Use Basic Hand Tools and Equipment (UT) First Edition, 2020
Republic Act 8293, section 176 states that: No copyright shall subsist in any work of the Government of the Philippines. However, prior approval of the government agency or office wherein the work is created shall be necessary for exploitation of such work for profit. Such agency or office may, among other things, impose as a condition the payment of royalties.
Borrowed materials (i.e., songs, stories, poems, pictures, photos, brand names, trademarks, etc.) included in this module are owned by their respective copyright holders. Every effort has been exerted to locate and seek permission to use these materials from their respective copyright owners. The publisher and authors do not represent nor claim ownership over them.
Published by the Department of Education Secretary: Leonor Magtolis Briones Undersecretary: Diosdado M. San Antonio
Development Team of the Module
Writer: James Aldrin S. Estabillo
Editors: Jose Joel B. Moso, Isidro L. Dagum, Jr., Jesica L. Palma, Ian Kith S. Parcon, Angelo D. Samillano, Alou Camille B. Sabado and Dawn Hope H. Almuena
Reviewers: Evelyn C. Frusa, PhD, Grace J. Miravalles, Rolex H. Lotilla and Arvin Tejada
Illustrator: Jed A. Batisanan
Layout Artist: Jackie Lynn R. Langga
Management Team: Allan G. Farnazo, CESO IV – Regional Director Gilbert B. Barrera – Chief, CLMD Arturo D. Tingson Jr. – REPS, LRMS Peter Van C. Ang-ug – REPS – ADM Coordinator Belen Fajemolin, Ph.D. – CID Chief Evelyn C. Frusa, Ph.D – EPS In Charge of LRMS Bernardita M. Villano – ADM Coordinator
Printed in the Philippines by Department of Education – SOCCSKSARGEN Region
Office Address: Regional Center, Brgy. Carpenter Hill, City of Koronadal Telefax: (083) 2288825/ (083) 2281893 E-mail Address: region12@deped.gov.ph
Introductory Message
This Self-Learning Module (SLM) is prepared so that you, our dear learners, can continue your studies and learn while at home. Activities, questions, directions, exercises, and discussions are carefully stated for you to understand each lesson.
Each SLM is composed of different parts. Each part shall guide you step-by- step as you discover and understand the lesson prepared for you.
Pre-test are provided to measure your prior knowledge on lessons in each SLM. This will tell you if you need to proceed on completing this module, or if you need to ask your facilitator or your teacher’s assistance for better understanding of the lesson. At the end of each module, you need to answer the post-test to self-check your learning. Answer keys are provided for each activity and test. We trust that you will be honest in using these.
In addition to the material in the main text, Notes to the Teachers are also provided to the facilitators and parents for strategies and reminders on how they can best help you on your home-based learning.
Please use this module with care. Do not put unnecessary marks on any part of this SLM. Use a separate sheet of paper in answering the exercises and tests. Read the instructions carefully before performing each task.
If you have any questions in using this SLM or any difficulty in answering the tasks in this module, do not hesitate to consult your teacher or facilitator.
Thank you.
The following are some reminders in using this module:
- Use the module with care. Do not put unnecessary mark/s on any part of the module. Use a separate sheet of paper in answering the exercises.
- Don’t forget to answer What I Know before moving on to the other activities included in the module.
- Read the instructions carefully before doing each task.
- Observe honesty and integrity in doing the tasks and checking your answers.
- Finish the task at hand before proceeding to the next.
- Return this module to your teacher/facilitator once you are through with it.
If you encounter any difficulty in answering the tasks in this module, do not hesitate to consult your teacher or facilitator. Always bear in mind that you are not alone.
We hope that through this material, you will experience meaningful learning and gain a deep understanding of the relevant competencies. You can do it!
What I Need to Know
Welcome to the world of Shielded Metal Arc Welding (SMAW)!
This Module is an exploratory course, which leads you to Shielded Metal Arc Welding [SMAW] National Certificate Level II [NC II]. It covers common competencies for you to possess.
These competencies are:
- Preparing hand tools before the actual servicing activities,
- and using appropriate hand tools for a specific job.
Learning Objectives:
At the end of the lesson, you are expected to do the following:
- Identify the different basic hand tools, materials, and equipment used in Shielded Metal Arc Welding;
- Manipulate the tools and materials in a job/task according to their uses.
(TLE_IAAW7/8UT-Oa-I)
What I Know
Pre Test
Let us determine what proportion you already realize in identifying materials and tools applicable to a selected construction job.
Direction: Select the letter of the correct answer. Write your answers in your activity notebook.
A _________ is a tradesperson who specializes in fusing materials and fabricates or puts together metal parts.
- A. Carpenter
- B. Welder
- C. Engineer
- D. Auto-mechanic
It is a tool used to measure or set distances, and layout arcs and circles.
- A. Divider
- B. Hacksaw
- C. Plier
- D. Try square
It is rectangular and tapered slightly in width and thickness. It is the foremost commonly used file for general work.
- A. Divider
- B. Hacksaw
- C. Plier
- D. Try square
It is used for chipping flat surfaces, cutting of rivets or metal fasteners, thin sheets, small bars; and for general purposes.
- A. Cold Chisel
- B. Hacksaw
- C. Plier
- D. Try square
It is a tooth cutting tool usually with a solid and adjustable frame.
- A. Hammer
- B. Screwdriver
- C. Wrench
- D. None of the above
It is a tool used for loosening and tightening light and heavy nuts and bolts.
- A. Hacksaw
- B. Screwdriver
- C. Wrench
- D. None of the above
This tool is used to tighten and loosen screws by pushing or pulling screws in a rotating manner.
- A. Hammer
- B. Screwdriver
- C. Wrench
- D. None of the above
This is a flexible rule, when extended will support itself, but may also be used to measure curved, irregular surfaces.
- A. Push-pull
- B. Screwdriver
- C. Hammer
- D. Claw hammer
A ________ is any tool that is powered by hand rather than a motor.
- A. Hand Tool
- B. Cleaning Tool
- C. Diagnostic Tool
- D. None of the above
This device is designed to hold work securely while performing skills through grinding, bending, fitting, and cutting of metals.
- A. Push-pull
- B. Screwdriver
- C. Clamp
- D. Claw hammer
Use Basic Hand Tools and Equipment (UT)
Metal Arc welding is such an important part of our lives. Buildings and infrastructural projects are dependent on metal works and they play an important role especially on construction works. It is necessary for the industry to have expert and skilled persons in relation to metal works and products. Without them, building construction projects will fail to accomplish because of the lack of metal specialized workers. Basic hand tools are essential whenever repair or servicing is needed in this field of work. This module will surely guide you in preparing and using appropriate hand tools before you do the actual repair and servicing in relation to metal works.
What’s In
Do you have some welding materials at home? Can you identify those materials? I think you should because some of those materials are used in metal works by our welders in building construction trades. However, if not, here, you are going to explore the construction materials, tools and equipment.
[photo: welder in a helmet and protective jacket striking an arc, with sparks flying]
Image Source: https://commons.wikimedia.org/wiki/File:Shielded_Metal_Arc_Welding.jpg palmer.html
Notes to the Teacher
Good day! You are now directing into more exciting and meaningful activities. Complete the activities by answering the worksheet to explore real learning skills.
What’s New
Activity 1: Matching Type
Direction: Match the words in Column A with the correct illustration of the different metal works tools and equipment from Column B.
| Column A | Column B |
|---|---|
| 1. Pull-push rule | A. [photo: screwdriver] |
| 2. Pliers | B. [photo: C-clamp marked “HEAVY DUTY”] |
| 3. Punches | C. [photo: machinist vise] |
| 4. Try square | D. [photo: ball hammer] |
| 5. Dividers | E. [photo: hacksaw] |
| 6. Hacksaw | F. [photo: dividers] |
| 7. Ball Hammers | G. [photo: try square] |
| 8. Machinist vise | H. [photo: punch] |
| 9. C-Clamp | I. [photo: pliers] |
| 10. Screwdriver | J. [photo: pull-push rule] |
What is It
Welders and any work related to metal works cannot do their job without these materials and tools. These materials make the work of welder easier in building walls, structures and walkways. Here are some SMAW materials and tools.
A. Measuring tools
Measuring tools are used to measure the dimension of an object or metal.
| Description | Illustration |
|---|---|
| Pull-push rule. This flexible rule when extended will support itself, but can also be wont to measure curved, irregular surfaces. Steel tape rule blade is typically ½ inch wide and 72 inches long. The graduation is sixteenths, except for the first 6 inches which are graduated in thirty-seconds of an inch. | [photo: Stanley pull-push rule extended] |
| Steel tape. It is analogous to a steel tape rule apart from its flexible number of feet that are marked on the tape. The tape is 3/8-inch-wide and available in lengths from 25 to 100 feet. | [photo: steel tape reel] |
| Steel rule. This is the foremost common tool utilized in the tool room. It is made of tempered steel about 1/8-inch-thick and ¾ inch wide and 6 to 12 inches long. The same style may be obtained in length from 1 to 48 inches. | [photo: steel rule] |
| Try square. It is an instrument used to measure the square of an object. | [photo: try square] |
| Combination square. It is an instrument combined with 45°, 90°, and a protractor. | [photo: combination square] |
[transcriber’s note: table continued from the previous page; its header row is not shown on this page]
| Micrometer caliper. It is a precision measuring instrument used to measure dimensions in thousandths of an inch. | [photo: micrometer caliper] |
| Vernier caliper. It is a precision measuring instrument used to measure the inside, outside diameter, as well as the depth of hole and slot. | [photo: vernier caliper] |
| Dividers. These are used for measuring or setting of distances, and to layout arcs and circles. | [photo: dividers] |
| B. Cutting Tools | |
|---|---|
| Hacksaw. A toothed cutter usually with a solid and adjustable frame. The main parts are handles, blade, tightening screw, and nuts. | [photo: hacksaw] |
| Files. Are made from high-grade steel which is hardened and tempered. Each file has rows of teeth that form, shape, and finish metal by removing small chips and smoothing rough edges of the metal surface. | [photo: file] |
| Chisel. A wedge-shaped tool used to shear, cut, and chip metal. | [photo: chisel] |
| Scraper. It is used in removing points, burrs, and sharp edges from the metal surface and similar parts. | [photo: scraper] |
| C. Marking Tools | |
|---|---|
| Punches. Are used for permanent marking on the surface of metal. | [photo: punch] |
| D. Driving Tools | |
|---|---|
| Ball peen hammer. It is employed for straightening, bending, and deforming metals. It has two faces. Some is flat in striking cold chisels and punches. | [photo: ball peen hammer] |
| Chipping hammer. It is employed for removing slag on the weld and with two faces, the taper from one side and round pointed on the opposite side. | [photo: chipping hammer] |
| Wrench. It is used for loosening and tightening light and heavy nuts, and bolts. | [photo: wrench] |
| Screwdriver. It is used to tighten and loosen screws by pushing or pulling screws in a rotating manner. | [photo: screwdrivers] |
| E. Holding Tools | |
|---|---|
| Toolmaker clamp. It is employed for holding small parts both at the bench and at the machine. This tool is additionally referred to as a parallel clamp. | [photo: toolmaker clamp] |
| C-Clamp. Is an all-purpose clamp that is generally used for all types of labor. | [photo: C-clamp] |
[transcriber’s note: table continued from the previous page]
| E. Holding Tools | |
|---|---|
| Drill vise. A sturdy steel vise with a movable jaw that easily goes back or forth by raising the handle. | [photo: drill vise] |
| Machinist vise. A work holding tool for machining activity. | [photo: machinist vise] |
| Hand vise. V block with clamp is employed to carry metal stocks for little machining operation. | [photo: hand vise] |
| Vise-Grip. A tool used to grip the stock tight enough to carry the thing. | [photo: vise-grip] |
| Tong. It is used to hold the metal to be forged and must be held securely while working. | [photo: tong] |
| Pliers. Used for holding, cutting, and twisted wires. | [photo: pliers] |
| Electrode Holder. | A handle like a tool that holds the electrode during welding. It receives amperage and directs it through the electrode to form an arc and should be well insulated and free from defect. | [photo: electrode holder] |
|---|---|---|
| Welding Machine. | Shielded Metal Arc Welding machine is the main part of this process, because without the machine certainly, we cannot do the welding process. | [photo: welding machine] |
| Welding rod/ Electrode. | Consists of an internal metal core and an outer coating called flux. -Metal core melts into the molten base metal. -Flux is turned into a gas shield as it burns away. | [photo: welding rods] |
Activity No. 2
Guide Questions: Answer the following questions and write your answer in your activity notebook.
- Have you seen any tool in relation to metal works in your community? Give five (5) examples.
- What are the common metal works materials and tools according to their types?
[transcriber’s note: the question’s line is partly obscured in the scan; the wording is read from the printed text]
- Why do you think these materials and tools are beneficial to metal works?
What’s More
Activity 3:
Direction: Supply what is defined or described. Write your answer on your activity notebook.
_____ 1. It is similar to a steel tape rule except for its flexible number of feet that are marked on the tape.
_____ 2. It is an instrument used to measure the square of an object.
_____ 3. These are used for measuring or setting of distances, and to get out arcs and circles.
_____ 4. It is a tooth cutting tool usually with a solid and adjustable frame.
_____ 5. It is a wedge-shaped tool wont to shear, cut, and chip metal.
_____ 6. It is used in removing points, burrs and sharp edges from metal surface and similar parts.
_____ 7. It is used for permanent marking on the surface of metal.
_____ 8. It is used for removing slag on weld and with two faces, the tapered from one side and round pointed on the opposite side.
_____ 9. They are used for holding, cutting and twisting wires.
_____ 10. It is used to hold the metal to be forged and must be held securely while working
What I Have Learned
Direction: Fill in the blank. Select the answer provided inside the box. Write your answer in your activity notebook.
Plier Wrench Scraper Chisel Divider Try Square
_____ is used for measuring or setting of distances, and to layout arcs and circles.
_____ is an instrument used to measure the square of an object.
_____ is a wedge-shaped tool used to shear, cut, and chip metal.
_____ is used for holding, cutting and twisted wires.
_____ is a tool used for loosening and tightening light and heavy nuts and bolts.
What I Can Do
Activity 4:
Direction: Suppose you were told to repair and improve the appearance of the damaged metal fence of a house. The problem is your tight budget. What will you do?
a. What metal works materials and tools will you use?
b. Why did you choose such materials and tools?
c. What will you do to determine the right quantity of the materials needed
Assessment [transcriber’s note: the word “Assessment” is printed here in the layout, above item d]
d. What factors do you consider in selecting and using SMAW Tools?
e. List down tools that help you get an accurate and exact measurement.
Assessment
Post-test:
Let us determine how much you already know about identifying materials and tools applicable to a specific construction job.
Direction: Select the letter of the correct answer. Write your answers in your activity notebook.
A _________ is a tradesperson who specializes in fusing materials together and fabricates or puts together metal parts.
a. Carpenter
b. Welder
c. Engineer
d. Auto-mechanicIt is a tool used for measuring or setting of distances, and to layout arcs and circles.
a. Divider
b. Hacksaw
c. Plier
d. Try squareIt is rectangular in shape and tampered slightly in width and thickness. It is the most commonly used files for general work.
a. Divider
b. Hacksaw
c. Plier
d. Try squareIt is used for chipping flat surfaces, cutting of rivets or metal fasteners, thin sheets, small bars; and for general purposes.
a. Cold Chisel
b. Hacksaw
c. Plier
d. Try squareA tooth cutting tool usually with a solid and adjustable frame.
a. Hammer
b. Screwdriver
c. Wrench
d. None of the aboveIt is a tool used for loosening and tightening light and heavy nuts and bolts.
a. Hacksaw
b. Screwdriver
c. Wrench
d. None of the aboveThis tool is used to tighten and loosen screws by pushing or pulling screws in a rotating manner.
a. Hammer
b. Screwdriver
c. Wrench
d. None of the aboveThis flexible rule when extended will support itself, but may also be used to measure curved, irregular surfaces.
a. Push-pull
b. Screwdriver
c. Hammer
d. Claw hammerA _________ is any tool that is powered by hand rather than a motor.
a. Hand Tool
b. Cleaning Tool
c. Diagnostic Tool
d. None of the aboveThis device is designed to hold work securely while performing skills through grinding, bending, fitting, and cutting of metals.
a. Push-pull
b. Screwdriver
c. Clamp
d. Claw hammer
Additional Activities
Activity 4:
Complete the lines in the box for the word search.
[illustration: ten tool pictures in two rows, best reading: pliers, adjustable wrench, try square, steel rule, hacksaw, chisel, scraper, tongs, punches, dividers]
| S | T | E | E | L | R | U | L | E | W | I | S |
| E | R | I | C | A | O | T | L | E | R | O | C |
| R | Y | U | H | E | N | F | I | R | E | E | R |
| P | S | O | I | R | G | I | E | I | N | T | A |
| L | Q | Y | S | D | F | O | R | U | C | O | P |
| I | U | T | E | S | E | H | E | O | H | N | E |
| E | A | T | L | F | T | J | W | U | O | G | R |
| R | R | D | I | V | I | D | E | R | S | E | R |
| S | E | T | Y | U | O | P | R | E | A | E | R |
| H | A | C | K | S | A | W | Y | T | U | Y | V |
| P | U | N | C | H | E | S | O | P | P | O | B |
Answer Key
Pre-Test
- B
- A
- D
- A
- A
- C
- B
- A
- A
- C
Activity 1
- J
- I
- H
- G
- F
- E
- D
- C
- B
- A
Activity 3
- Steel tape
- Try square
- Divider
- Hacksaw
- Chisel
- Scraper
- Punches
- Chipping hammer
- Plier
- Tong
What I have Learned
- Divider
- Try square
- Chesil
- Plier
- Wrench
[transcriber’s note: “Chesil” is printed as shown; the intended word may be “Chisel”]
Post-Test
- B
- A
- D
- A
- A
- C
- B
- A
- A
- C
Activity 4:
CHISEL WRENCH PLIER TRYSQUARE DIVIDER TONG SCRAPER PUNCHES HACKSAW STEEL RULE
References
Kennedy, G. A. (1982). Welding technology. Indianapolis: Bobbs-Merrill Educational Pub.
JEFFUS, L. (2016). WELDING + PIPE WELDING + MINDTAP WELDING, 2 TERMS – 12 MONTHS ACCESS CARD FOR JEFFUS’ WELDING: … principles and applications, 8th ed. Place of publication not identified: DELMAR.
Johnson, H. V. (1981). Technical metals. Peoria, IL: Bennett.
Gower A. Kennedy. (n.d.). Welding Technology, Second Edition by Bainbridge, C. G. (1980). Welding. New York: McKay.
Castillo, R. G., & Santelices, L. (n.d.). K to 12 Smaw Learning Module. Deped
For inquiries or feedback, please write or call:
Department of Education – Bureau of Learning Resources (DepEd-BLR)
Ground Floor, Bonifacio Bldg., DepEd Complex Meralco Avenue, Pasig City, Philippines 1600
Telefax: (632) 8634-1072; 8634-1054; 8631-4985
Email Address: blr.lrqad@deped.gov.ph * blr.lrpd@deped.gov.ph
Leave a Reply