This is Module 4 of the TLE Shielded Metal Arc Welding (SMAW) Self-Learning Module for Grade 7/8, Quarter 1, titled “Maintain Tools and Equipment (MT).” It is part of DepEd’s Alternative Delivery Mode materials for learners studying at home. After working through it, learners should be able to check whether tools are in good condition, perform basic preventive maintenance, and store tools and equipment properly, following industry standards.
On this page 6 sections
What learners will learn
By the end of the module, learners should be able to:
- Check the condition of tools and equipment (TLE_IAAW7/8MT-0h-1)
- Perform basic preventive maintenance (TLE_IAAW7/8MT-0i-2)
- Store tools and equipment (the code for this objective is printed incompletely in the module, as TLE_IAAW7/8MT-0i-)
Functional and non-functional tools
The module has one lesson, Lesson 4: Maintain Tools and Equipment. It starts from a simple idea: tools make work easier and faster, but tools that no longer work can cause harm.
It first reviews how tools are classified by use: measuring, holding, cutting, driving, and boring tools, electrical equipment, and miscellaneous tools, instruments, and equipment.
- Functional tools and equipment are in good condition and can do their regular job. You usually notice this first from their appearance. Examples in the module are a ball-peen hammer, screwdriver, combination pliers, flat screwdriver head, welding machine, grinder, bench vise, and vise grip.
- Non-functional tools and equipment can no longer do their regular job because of damaged parts. They should be labeled correctly so no one gets hurt using them.
The module gives examples of defective tools and their causes:
| Defective tool | Causes given in the module |
|---|---|
| Broken ball-peen hammer handle | Mishandling, substandard wood, worn-out handle |
| Bent screwdriver | Mishandling, substandard material |
| Chipped flat screwdriver head | Mishandling, brittle metal, rust |
| Broken side cutting pliers handle | Mishandling, substandard material, worn out |
| Damaged welding cable | Mishandling, brittle cable, cut by a sharp object, worn out |
| Broken grinder blade | Mishandling, chipping on the brittle surface, worn out |
Five ways to identify non-functional tools
- Visual inspection: an expert looks at the appearance of the tool or equipment.
- Functionality: vibration or extra noise during operation means problems with parts are starting.
- Performance: if a tool does not perform well, it needs immediate repair or maintenance.
- Power supply (electrically operated tools only): if the required power supply is not met, parts can malfunction.
- Persons involved: a technical person with the right knowledge and skills.
Inspection, maintenance, and storage
Inspection
The purpose of inspection is to find hazards and correct them before an accident happens. The module lists who inspects (safety professionals, management, first-line supervisors or foremen, employees, maintenance personnel, and the Joint Safety and Health Committee) and a long list of items to inspect, from hand tools and electrical equipment to personal protective equipment, fire protection equipment, and storage areas.
Key ideas covered:
- Continuous inspection is informal: noting and reporting a hazard as soon as you see it.
- Interval inspection is planned and systematic, done periodically, intermittently, or generally.
- When inspecting, do not interrupt normal work, review past accident and inspection reports, wear personal protective equipment, and use a checklist.
- Inspection reports are of three types: emergency (made without delay for a critical hazard), periodic (made within 24 hours of a planned inspection), and summary (a list of items from earlier periodic reports).
- Inspectors follow four rules: correct the cause whenever possible, immediately correct everything possible, report conditions beyond your authority and suggest solutions, and take intermediate action as needed.
Routine maintenance
The module explains that repair fixes something that has stopped working, while maintenance is scheduled care. The maintenance schedule should be posted where everyone in the shop can see it. Simple maintenance tasks are:
- Lubricating parts such as rollers, springs, bearings, bolts, and nuts
- Tightening and loosening fittings following proper procedures
- Hand sharpening of knife blades, cold chisels, and punches
- Simple repair, such as replacing a hammer’s wooden handle or fixing a mushroomed cold chisel head
- Cleaning, for example with an air vacuum or a piece of cloth
Proper storage with 5S
- Sort: separate needed tools from unneeded items.
- Set in order: arrange and label tools for easy use.
- Shine: clean the work area.
- Standardize: schedule regular cleaning and maintenance.
- Sustain: make the first four S’s a daily habit.
How to use this module
The module follows the usual Self-Learning Module parts: What I Need to Know, What I Know (pretest), What’s In, What’s New, What is It, What’s More, What I Have Learned, What I Can Do, Assessment (post-test), and Additional Activities.
- Learners: Start with the 15-item pretest (10 multiple choice and 5 true or false). Write all answers in your activity notebook or on a separate sheet, not on the module. Then work through the lesson, the guide questions, and Activities 1 to 3. Activity 3 asks you to check a tool at home and explain how to store a welding machine after use. Finish with the post-test and Activity 4, where you gather, clean, and properly store the tools at home and write a reflection.
- Parents: Help your child find safe tools at home for Activities 3 and 4, and remind them to use the answer key honestly, only after answering.
- Teachers: An answer key for the pretest, Activity 1, and the post-test is on the last pages. The module invites learners to consult you when they have difficulty with the lesson.
Frequently asked questions
What grade and quarter is this SMAW module for?
It is for Grade 7/8 TLE Shielded Metal Arc Welding (SMAW), Quarter 1, Module 4.
What does SMAW mean?
SMAW stands for Shielded Metal Arc Welding, the welding specialization this TLE module belongs to.
What are the methods of identifying non-functional tools in this module?
The module lists visual inspection, functionality, performance, power supply (for electrically operated tools only), and persons involved.
Does the module have an answer key?
Yes. The answer key on the last page covers the pretest, Activity 1, and the post-test.
What is 5S in tool storage?
5S stands for Sort, Set in order, Shine, Standardize, and Sustain, a method the module uses for proper storage of hand tools and equipment.
Full text of the module
The text below is a transcription of the PDF above, as printed.
TLE (SMAW) Module 4: MAINTAIN TOOLS AND EQUIPMENT (MT)
[illustration: learners studying at home, one reading under a tree, others with books, a globe, and a lamp]
CO_Q1_TLE-SMAW 7/8_ Module 4
TLE SMAW – Grade 7/8 Alternative Delivery Mode Module 4: Maintain Tools and Equipment (MT) First Edition, 2020
Republic Act 8293, section 176 states that: No copyright shall subsist in any work of the Government of the Philippines. However, prior approval of the government agency or office wherein the work is created shall be necessary for exploitation of such work for profit. Such agency or office may, among other things, impose as a condition the payment of royalties.
Borrowed materials (i.e., songs, stories, poems, pictures, photos, brand names, trademarks, etc.) included in this module are owned by their respective copyright holders. Every effort has been exerted to locate and seek permission to use these materials from their respective copyright owners. The publisher and authors do not represent nor claim ownership over them.
Published by the Department of Education Secretary: Leonor Magtolis Briones Undersecretary: Diosdado M. San Antonio
Development Team of the Module
Writer: Izer Jireh G. Claudio / Mark Anthony L. Baleña
Editors: Jose Joel B. Moso, Isidro L. Dagum, Dawn Hope H. Almuena, Angel Mateo, Raleigh J. Ojanola, Precious Joy A. Ubas
Reviewers: Evelyn C. Frusa, PhD, Grace J. Miravalles, Rolex H. Lotilla, and Arvin M. Tejada
Illustrators: Herminio Juelo
Layout Artist: Kent M. Corpuz
Management Team: Allan G. Farnazo, CESO IV – Regional Director Gilbert B. Barrera – Chief, CLMD Arturo D. Tingson Jr. – REPS, LRMS Peter Van C. Ang-ug – REPS – ADM Coordinator Belen Fajemolin, Ph.D. – CID Chief Evelyn C. Frusa, Ph.D – EPS In Charge of LRMS Bernardita M. Villano – ADM Coordinator
Printed in the Philippines by Department of Education – SOCCSKSARGEN Region
Office Address: Regional Center, Brgy. Carpenter Hill, City of Koronadal Telefax: (083) 2288825/ (083) 2281893 E-mail Address: region12@deped.gov.ph
Introductory Message
This Self-Learning Module (SLM) is prepared so that you, our dear learners, can continue your studies and learn while at home. Activities, questions, directions, exercises, and discussions are carefully stated for you to understand each lesson.
Each SLM is composed of different parts. Each part shall guide you step-by- step as you discover and understand the lesson prepared for you.
Pre-test are provided to measure your prior knowledge on lessons in each SLM. This will tell you if you need to proceed on completing this module, or if you need to ask your facilitator or your teacher’s assistance for better understanding of the lesson. At the end of each module, you need to answer the post-test to self-check your learning. Answer keys are provided for each activity and test. We trust that you will be honest in using these.
In addition to the material in the main text, Notes to the Teachers are also provided to the facilitators and parents for strategies and reminders on how they can best help you on your home-based learning.
Please use this module with care. Do not put unnecessary marks on any part of this SLM. Use a separate sheet of paper in answering the exercises and tests. Read the instructions carefully before performing each task.
If you have any questions in using this SLM or any difficulty in answering the tasks in this module, do not hesitate to consult your teacher or facilitator.
Thank you.
What I Need to Know
In this module, you will learn to demonstrate an understanding of concepts and underlying principles in the maintenance of SMAW tools and equipment. These will enable you to perform proper maintenance of SMAW tools and equipment based on industry standards.
Objectives:
At the end of this module, you should be able to:
- Check condition of tools and equipment, TLE_IAAW7/8MT-0h-1
- Perform basic preventive maintenance, and TLE_IAAW7/8MT-0i-2
- Store tools and equipment. TLE_IAAW7/8MT-0i-
[transcriber’s note: the code in objective 3 is printed as “TLE_IAAW7/8MT-0i-” and appears cut off in the source]
What I Know
Pre-Test
Let us determine how much you already know about defective and non-defective SMAW tools.
Direction: Select the letter of the correct answer. Write your answers in your activity notebook.
Defective hand tools are kept and _____________.
A. marked as defective.
B. mixed together with non-defective tools.
C. put anywhere in the shop.
D. sold in the junk shop.One way of checking whether hand tools are defective or non-defective is the_____________.
- length of service
- trademark of the manufacturer
- physical appearance
A. 1 only
B. 11 only
C. 111 only
D. 1, 11, and 111Which is determined after the operation of a hand tool is tested?
A. Service span
B. Performance
C. Physical appearance
D. Repair MaintenanceAll hand tools with major defects are subjected to _________.
- Repair
- Condemnation
- Display/sample
A. 1 only
B. 11 only
C. 111 only
D. 1, 11, and 111Service span of a tool pertains to _________.
A. maintenance schedule
B. determining when the tool is acquired
C. functionality of a tool
D. defectiveness of a toolWhen there is something wrong with either the tools or equipment, they need immediate repair and maintenance, this refers to _______.
A. Performance
B. Power supply
C. Functionality
D. Visual inspectionVibration or extra noise from the operation means problems on parts and accessories started to develop, this refers to ______.
A. Visual inspection
B. Functionality
C. Power supply
D. PerformanceFailure to meet the required power supply, malfunction will occur in the part of hand tools or equipment, but this will apply only to ______.
A. Wooden tools
B. Battery (DC) operated tools and equipment
C. Electrical (AC) operated tools and equipment.
D. Both B and CAn expert of the field when doing a visual inspection is more concerned on the _______ of the tools and equipment.
A. Performance
B. Functionality
C. Power Supply
D. AppearanceTools that are no longer functional may cause ______ when in used.
A. Joy
B. Efficiency
C. Excellence
D. Harm
B. TRUE OR FALSE: Read and analyze each statement below. Write TRUE if the statement is correct and FALSE if the statement is incorrect on the space provided.
_____________________ 1. Non-functional tools and equipment are those that are in good condition and can perform its regular functions.
_____________________ 2. Functional tools and equipment are those that are not able to perform its regular function because of impaired and damage part.
_____________________ 3. Visual inspection refers to the visual observation of an expert on the appearance of the tools and equipment.
_____________________ 4. Vibration or extra noise from the operation means problems on parts and accessories started to develop.
_____________________ 5. Failure to meet the required power supply, malfunction will occur in the part of hand tools or equipment.
Lesson 4 Maintain Tools and Equipment (MT)
Tools are very useful to us in our homes, especially to our job. It can help us make our work easy as it aids us to be more effective, and work faster. But tools that are no longer functional may cause harm.
What’s In
There are many ways of identifying hand tools. One of these is to identify them according to their function. However, awareness of defective and non-defective hand tools is the earliest concern of workers/welders to be effective in their jobs.
Classifications of tools and equipment according to their use:
- Measuring tools
- Holding tools
- Cutting tools
- Driving tools
- Boring tools
- Electrical equipment
- Miscellaneous tools/instrument/equipment
What’s New
Functional tools and equipment – refer to the tools and equipment that are in good condition and can effectively complete its regular functions. This can be noticed first by its appearance as it is the most obvious thing to be seen. A functional tool and equipment can help you work faster and make your task much easier than usual.
Given below are some examples of functional and non-defective tools and equipment:
Ball-peen hammer [photo: ball-peen hammer]
Screwdriver [photo: screwdriver]
Combination pliers [photo: combination pliers]
Flat screwdriver head [photo: flat screwdriver head]
Welding Machine [photo: welding machine]
Grinder [illustration: grinder]
Bench Vise [photo: bench vise]
Vise Grip [photo: vise grip]
[photo: bench vise and vise grip, shown without printed captions on this page]
Non-functional tools and equipment – refer to the tools and equipment that are no longer capable of performing its regular function because of some damaged parts. A non-functional tool can also cause harm if it is still used in its current defective state. That is why it is important for us to label correctly a tool that is no longer functional and defective to avoid harm.
Given below are some examples of non-functional and defective tools and equipment.
Broken Ball-peen hammer handle [illustration: ball-peen hammer with broken handle]
Causes:
- Mishandling
- The material used (wood) for the handle is substandard
- Worn-out handle (due to the amount of time of it being used)
Bent Screwdriver [photo: bent screwdriver]
Causes:
- Mishandling
- Substandard material was used in making the tool
Chipped Flat screwdriver head [photo: chipped flat screwdriver head]
Causes:
- Mishandling
- Brittle metal material
- Accumulation of rust on the screwdriver head.
Broken side cutting pliers handle [illustration: broken side cutting pliers]
Causes:
Mishandling
Substandard material was used in making the tool.
Worn-out
Damaged welding cable
[illustration: damaged welding cable]
Causes:
Mishandling
Brittle cable
Accidentally cut by a sharp object
Worn out
Worn-out
Broken grinder blade
[illustration: broken grinder blade]
Causes:
- Mishandling
- Chipping on the brittle surface
- Worn out
MAINTAIN TOOLS AND EQUIPMENT
The primary purpose of inspection is to detect potential hazards so they can be corrected before an accident occurs. Inspection should be conducted in an organization to locate and report existing and potential unsafe conditions or activities. It is important that every potential hazard found in workplaces must be corrected to ensure that no one will be injured, or will be exposed to any diseases and that working environment will not be contaminated by hazardous chemicals emitted in the process.
2. Inspection Priorities
Who will conduct the inspection?
a. Safety professionals. They spearhead the inspection activity
b. Company or facility management. They demonstrate commitment to maintain a safe working environment.
c. First – line Supervisors or Foreman. Continually monitoring the workplace.
d. Employees. They inspect the workplace and any tools, equipment, and machinery that will be used. Any defects that the employee is not authorized to correct should be reported immediately to the supervisor.
e. Maintenance personnel. He is responsible for locating and correcting hazards.
f. Joint Safety and Health Committee. It conducts regular inspection as part of its functions.
Items to be inspected are as follows:
Environmental factors
Hazardous supplies and materials
Production and related equipment’s
Power source equipment
Electrical equipment
Hand tools
Personal Protective Equipment
Personal service and first aid facilities
Fire protection and emergency response equipment
Walkways and roadways
Elevators, electric stairways and man lifts
Working surfaces
Materials handling equipment
Transport equipment
Warning and signaling devices
Containers
Storage facilities and area both indoor and outdoor
Structural openings
Building and structures
Miscellaneous
3. Schedule of Evaluation
Inspection can be classified as one of two types – continuous or interval inspection, which should be discussed using the key points such as the following:
a. Continuous Inspection
It involves noting an apparently or potentially hazardous condition or unsafe procedure that needs to be corrected immediately or reported at once to initiate corrective action. It is sometimes called informal inspection because it does not conform to a set of schedule, plan, or checklist.
b. Interval Inspection
Planned inspections at specific intervals are what most people regard as “real” safety and health inspections. They are deliberate and follow a systematic procedure that permits examination of specific items or conditions. Their interval inspections may be periodic, intermittent, or general.
4. Conducting Inspection
In conducting an inspection, some of the general considerations are the following; – Must not interrupt normal operations – Review all accidents and previous Inspection Report made. – Awareness of any potential hazards – Wearing of Personal Protective Equipment – Formulation of checklist.
5. Reporting and Recording
Checklists serve as reminders of what to look for and as records of what have been covered. They can be used to structure and guide inspection. They also allow on-the-spot recording of all findings and comments before they are forgotten. In case an
inspection is interrupted, checklists provide a record of what has and what has not been inspected. Otherwise, an inspection may miss items or conditions that should be examined. Good checklists also help in follow-up work to make sure hazards have been corrected or eliminated.
The format of a checklist should include columns to indicate either compliance or date of taken action. Space should also be provided to cite the specific violation, a way to correct it, and a recommendation that the condition receives more or less frequent attention. Whatever the format of the checklist, space should be provided for the inspector’s signature and the inspection date.
Inspection Report – Every inspection must be documented in a clearly written inspection report to furnished the inspector. Without a complete and accurate report, the inspection would be a little more than an interesting sightseeing tour. Inspection reports are usually of three types:
a. Emergency – made without delay when a critical or catastrophic hazard is probable.
b. Periodic – covers those unsatisfactory non-emergency conditions observed during the planned periodic inspection. This report should be made within 24 hours of the inspection.
c. Summary – lists of all items of previous periodic reports for a given time.
Generally, inspection reports are sent to the head of the department or area where the inspection was made. Copies are also given to executive management and the manager to whom the department head reports.
5. Implementation
Upon implementation of the inspection report, make sure that recommendations proposed by the inspector will be given priority depending on the hazards found in the area. In making recommendations, inspectors should be guided by four (4) rules:
a. Correct the cause whenever possible. If all the resources needed to correct the cause are already available, improve the working condition.
b. Immediately correct everything possible. All possible causes of accidents should be corrected at once to prevent their recurrence. This will definitely be done if all measures are in place.
c. Report conditions beyond one’s authority and suggest solutions. Safety is everybody’s job. Anyone should be involved in the prevention of accidents. If you identify hazards in your place or work, report them at once to your supervisor. Give some recommendation to correct the situation.
d. Take intermediate action as needed. Time is an essence as far as safety is concern. If an unsafe condition is identified and corrective measure is at hand, improve it at once.
6. Monitoring
Monitoring is a management prerogative. Management must realize that employees are keenly interested in the attention paid to correcting faulty conditions and hazardous procedures. Recommendations approved and supported by management should become part of the organization’s philosophy and program. At regular intervals, supervisors should report progress in complying with the recommendations to the safety department, the company safety and health committee, or the person designated by management to receive such information. Inspectors should periodically check to see what progress toward corrective actions is being made. Unsafe conditions left uncorrected indicate a breakdown in management communications and program applications.
Sometimes management will have to decide among the several courses of action. Often these decisions will be based on cost effectiveness. For example, it may be cost-effective as well as practical to substitute a less toxic material that works as well to the highly toxic substance presently in use. On the other hand, replacing a costly but hazardous machine may have to wait until funds can be allocated. In this case, the immediate alternative taken or proposed must be communicated to all persons involved.
7. Routine Maintenance
Maintenance of hand tools and machines are both primordial concerns of a repair technician in the welding shops and/or in the welding production. The activities should be on schedule and with proper coordination with the production people. The term “repair” and “maintenance” works mean differently. Repair, unusually focuses on the program of works done in the operation of power plants in machines that are in trouble of stopping its function. While the term “maintenance” means a scheduled or a planned visit of tools or equipment for inspection and from there, reports and recommendation developed and the next tasks to be decided such as cleaning, application of lubricants, dismantling and etc.
Some of the simple maintenance activities for hand tools, and the maintenance schedule should be posted in a visible corner of the shop where everybody can read it.
a. Lubricating. A task performed in the shop/production. Through the application of lubricant substance to the identified items in parts like barrels, rollers, springs, bearing, bolts and nuts, and other automotive parts.
b. Tightening/Loosening. In an assembly of structures, we have tools for fittings that need to be tightened and loosened and in as much as they pose high risk to safety. Tightening bolts and nuts and other fittings requires procedures that should carry out in compliance.
c. Tool for hand Sharpening. Some tools need to be sharpened such as blades of knife, cold chisel, punches and many others. To do hand sharpening for hand tools requires techniques and application. In some multi knives and cutter, manufacturers produce knife sharpening system to hold or clamp the blade to
ensure a strong blade to stone contact during sharpening and also provided with a course to fine honing stones. For cold chisel and punches, the right file-size and grades are used for repairing the defective anvil curve.
d. Simple Repair. Repair practices of hand tools are still available anytime. But, to some extent, tools are checked yearly and many of the hand tools are eligible for condemnation and the whole items are to be replaced by a new unit. However, there are instances that minor repairs can be performed, like replacement of a wooden handle of a hammer and a mushroomed head of a cold chisel.
e. Cleaning. Simple process applied to hand tools. The cleaning approach may differ from one another. For example, cleaning the rack corners of hand tools by using an air vacuum or by a piece of clothes. Similar process may be applied to identical cleaning situations
8. Proper Storage of Hand Tools and Equipment
5S Implementation
a. Sort – Eliminate whatever is not needed by separating needed tools, parts, and instructions from unneeded materials.
b. Set in order – Organize whatever remains by neatly arranging and identifying parts and tools for ease of use.
c. Shine – Clean the work area by conducting a cleanup campaign.
d. Standardize – Schedule regular cleaning and maintenance by conducting sorting, set in order, and shine daily.
e. Sustain – Make 5S a way of life by forming the habit of always following the first four S’s.
What is It
[illustration: magnifying glass held by a hand]
Methods of identifying non-functional tools and equipment
Visual inspection. It refers to the visual observation of an expert on the appearance of the tools and equipment.
Functionality. Vibration or extra noise from the operation means problems on parts and accessories started to develop.
Performance. When there is something wrong with the performance of either hand tools or equipment, they need immediate repair or maintenance.
Power supply (for electrically operated only). Failure to meet the required power supply, some malfunction will occur in the part of hand tools or equipment.
Persons involved. It refers to the technical person who has the knowledge and skills about technology.
Tools that are no longer functional may cause harm. So make sure to:
A. Make an inventory of functional and non-functional tools in your shop. B. Classify your tools according to is function
Guide Questions:
Answer the following questions and write your answer in your activity notebook.
- How can you recognize a functional tool and equipment?
- How can you recognize a non-functional tool and equipment?
- What is the best way to avoid damaging tools and equipment
What’s More
[illustration: hand stacking blocks]
Activity 1
A. Identify the following tools whether it is functional or non-functional. Explain why?
[illustration: pliers]
[photo: pliers]
[photo: claw hammer]
[illustration: wrench]
- [photo: chisel]
B. Answer the following question concisely.
- What will happen if you continue to use non-functional and defective tools and equipment?
What I Have Learned
[illustration: hand holding a light bulb]
Activity 2
You are about to complete this module; I am sure you can answer the following questions:
- How are you going to classify functional and non-functional tools and equipment?
- What will you do if the tools are no longer functional?
- What method of identifying non-functional tools and equipment do you find the easiest?
What I Can Do
[illustration: hand holding three nuts and bolts]
Activity 3
Now that you have learned how to check functional and nonfunctional tools and equipment. You are now tasked to do the following:
- Find any tools at home and determine whether it is functional or not. Explain why?
- Explain the step by step procedure of keeping/storing the welding machine after it is being used.
- What is the importance of observing proper maintenance of SMAW tools and equipment?
Assessment
[illustration: hand writing with a pencil]
Post-Test
Let us determine how much you already know about determining functional and non-functional tools and equipment.
Direction: Select the letter of the correct answer. Write your answers in your activity notebook.
1. Defective hand tools are kept and __________. A. marked as defective. B. mixed together with non defective tools. C. put anywhere in the shop. D. sold in the junk shop.
4. One way of checking whether hand tools are defective or non-defective is the__________. 1. length of service 11. trademark of the manufacturer 111. physical appearance
A. 1 only B. 11 only C. 111 only D. 1, 11, and 111
5. Which is determined after the operation of a hand tool is tested? A. Service span B. Performance C. Physical appearance D. Repair Maintenance
6. All defective hand tools with major defects are subjected to _________. 1. Repair 11. Condemnation 111. Display/sample
A. 1 only B. 11 only C. 111 only D. 1, 11, and 111
7. Service span of a tool pertains to _________. A. maintenance schedule B. determining when the tool is acquired C. functionality of a tool D. defectiveness of a tool
8. When there is something wrong with either the tools or equipment, they need immediate repair and maintenance, this refers to _______. A. Performance B. Power supply C. Functionality D. Visual inspection
9. Vibration or extra noise from the operation means problems on parts and accessories started to develop, this refers to ______. A. Visual inspection B. Functionality C. Power supply D. Performance
10. Failure to meet the required power supply, will cause malfunction in the part of hand tools or equipment, but this will apply only to ______. A. Wooden tools B. Battery (DC) operated tools and equipment C. Electrical (AC) operated tools and equipment. D. Both B and C
11. An expert of the field when doing a visual inspection is more concerned on the _______ of the tools and equipment. A. Performance B. Functionality C. Power Supply D. Appearance
12. Tools that are no longer functional may cause ______ A. Joy B. Efficiency C. Excellence D. Harm
B. TRUE OR FALSE: Read and analyze each statement below. Write TRUE if the statement is correct and FALSE if the statement is incorrect. Write your answer on the space provided.
____________________ 1. Non-functional tools and equipment are those that are in good condition and can perform its regular functions.
____________________ 2. Functional tools and equipment are those that are not able to perform its regular function because of impaired and damage part.
____________________ 3. Visual inspection refers to the visual observation of an expert on the appearance of the tools and equipment.
____________________ 4. Vibration or extra noise from the operation means problems on parts and accessories started to develop.
____________________ 5. Failure to meet the required power supply, will cause malfunction in the part of hand tools or equipment.
Additional Activities
Activity No. 4: Proper Storage and Maintenance of Tools and Equipment
Instruction:
1. Gather all tools available (SMAW or any tools) in your home. 2. Clean the tools and equipment properly. 3. Place the tools and equipment in a storage place, and arrange them properly.
Reflection: __________________________________________
[transcriber’s note: the reflection space is a large empty bordered box with no printed text]
Answer Key
[transcriber’s note: the answer key on this page is printed upside down; the text below is read from the rotated page and arranged in upright reading order]
Pretest
A. 1. A 2. C 3. C 4. B 5. B 6. A 7. B 8. C 9. D 10. D
B. 1. FALSE 2. FALSE 3. TRUE 4. TRUE 5. TRUE
Activity 1
A. 1. non-functional 2. functional 3. non-functional 4. functional 5. non-functional
Activity 4
BROKEN DEFECTIVE FUNCTION PERFORMANCE INSPECTION
Post test
A. 1. A 2. C 3. C 4. B 5. B 6. A 7. B 8. C 9. D 10. D
B. 1. FALSE 2. FALSE 3. TRUE 4. TRUE 5. TRUE
References
- Kennedy, Grower A., Welding Technology, Second Edition
- Welding Inspection Technology, Education Department, American Welding Society
- Jeffus, Larry and Johnson Harold V., Welding Principles and Application
- DepEd k to 12 TLE Learning Module-SMAW
- www.weldguru.com, SMAW: Shielded Metal Arc Welding, May 13, 2020, https://weldguru.com/smaw-welding/
- www.wikipedia.org, Shielded Metal Arc Welding, May 17, 2020, https://en.wikipedia.org/wiki/Shielded_metal_arc
For inquiries or feedback, please write or call:
Department of Education – Bureau of Learning Resources (DepEd-BLR)
Ground Floor, Bonifacio Bldg., DepEd Complex Meralco Avenue, Pasig City, Philippines 1600
Telefax: (632) 8634-1072; 8634-1054; 8631-4985
Email Address: blr.lrqad@deped.gov.ph * blr.lrpd@deped.gov.ph
Leave a Reply