This is the Science Grade 4 Self-Learning Module for Quarter 1, Module 2: “Changes in Solid Materials.” It was prepared by DepEd Region V as an Alternative Delivery Mode (ADM) module (First Edition, 2020) for learners studying at home. After working through its four lessons, learners can describe what happens to solid materials when they are bent, pressed, hammered, or cut, and explain why these are physical changes.
On this page 6 sections
What learners will learn
The module covers the competency coded S4MT-Ie-f-5. After going through it, learners are expected to:
- identify characteristics of solid materials in terms of size, shape, and texture
- describe what happens to solid materials when they are bent
- identify some changes that happen to solid materials when pressed
- describe the changes that happen in solid materials when pressed
- identify some ways of changing solid materials in size, shape, and texture by hammering
- identify materials that can be cut
- describe the changes that happen in solid materials when hammered
- describe what happens to solids when cut
Lessons in this module
- Changes in Solid Materials When Bent. Learners bend a plastic ruler, electric wire, metal spoon, paper clip, rubber slippers, and tie wire, then record how each one changed.
- Changes in Solid Materials When They Are Pressed. Learners press modeling clay, a ripe banana, pandesal or any bread, and a paper cup using a piece of wood, an empty glass or bottle, or a large stone.
- Changes in Solid Materials When Hammered. Learners look at how chalk, a tin can, nails, a bottle cap, a stone, and a vase change when hammered, then hammer a block of wood, a broken plate, a piece of hollow block, and a piece of galvanized iron.
- Changes in Solid Materials When Cut. Learners use scissors to cut paper, cardboard, a candy wrapper, leaves, a plastic cover, and cloth.
Key ideas: solids and physical change
The module teaches that solid materials have a definite shape and volume. They also have properties such as size, shape, color, texture, and weight. When a force acts on a solid, some of these properties can change.
A physical change happens when only the physical appearance of a material changes and no new material is formed. Every action in this module (bending, pressing, hammering, and cutting) causes a physical change.
| Action | What may change | Examples from the module |
|---|---|---|
| Bending | Size and shape | Paper clip, tie wire, metal spoon, bending a steel bar in industry |
| Pressing | Size and shape; some solids also change texture | Modeling clay, ripe banana, bread, pizza dough flattened with a rolling pin |
| Hammering | Size, shape, texture, and color | Tin can, stone, bottle cap, hollow block |
| Cutting | Size and shape | Paper, cloth, leaves, candy wrapper |
In all four cases, the module stresses the same rule: no new material is formed.
Points worth remembering
- A bent paper clip or tie wire is still a paper clip or tie wire. Only its look has changed.
- Pressed clay can become a ball, a rod, or a flat tray, as in the example of Angelo and his modeling clay. The clay changed its size and shape.
- Hammering a tin can flattens it, changing its size and shape.
- Not all solids can be cut with simple scissors. Materials like iron and steel need special tools such as metal cutters or machine cutters.
- Liquids such as water, juice, soy sauce, and vinegar are not solids, so learners sort them out in the review activities.
How to use this module
The module follows the usual self-learning module parts: What I Need to Know, What I Know (pretest), and for each lesson What’s In, What’s New, What is It, What’s More, What I Have Learned, What I Can Do, Assessment, and Additional Activities. An answer key for each lesson is at the end.
- Learners: Start with the pretest, which has a word search, a check-or-X sorting task, and jumbled words. Then go through the lessons in order. Write all answers in your Science notebook or on a separate sheet, not in the module. Check your work with the answer key honestly after you finish each activity.
- Parents and guardians: The module asks you to guide and supervise your child during the hands-on activities. Remind your child to be careful with empty bottles and scissors, to use gloves, to wash hands before and after handling materials, and not to eat leftover food used in the activities.
- Teachers: Each lesson ends with an assessment and an additional activity, such as making an artwork from bent materials or cutting and pasting 6 to 8 pictures of materials that change when cut. Many What I Can Do tasks ask learners to find bending, pressing, hammering, and cutting at home, in school, and in the community, so answers will vary.
Frequently asked questions
What grade and quarter is this module for?
It is for Grade 4 Science, Quarter 1. It is Module 2 of the quarter.
What are the four lessons in Changes in Solid Materials?
The lessons cover changes in solid materials when bent, when pressed, when hammered, and when cut.
Is a new material formed when a solid is bent, pressed, hammered, or cut?
No. The module explains that only the physical appearance of the material changes, which is why these are called physical changes.
Does the module have an answer key?
Yes. Answer keys for all four lessons are at the end of the module, though many open-ended tasks note that pupils’ answers may vary.
What competency does this module cover?
The module lists the competency code S4MT-Ie-f-5, which covers describing changes in solid materials when bent, pressed, hammered, or cut.
Full text of the module
The text below is a transcription of the PDF above, as printed.
Science Quarter 1 – Module 2: “Changes in Solid Materials”
Science
Quarter 1 – Module 2: “Changes in Solid Materials”
[illustration: students and a teacher learning indoors and outdoors, with a globe, a lamp, and books]
CO_Q1_Science 4_ Module 2
Science – Grade 4 Alternative Delivery Mode Quarter 1 – Module 2: “Changes in Solid Materials” First Edition, 2020
Republic Act 8293, section 176 states that: No copyright shall subsist in any work of the Government of the Philippines. However, prior approval of the government agency or office wherein the work is created shall be necessary for exploitation of such work for profit. Such agency or office may, among other things, impose as a condition the payment of royalties.
Borrowed materials (i.e., songs, stories, poems, pictures, photos, brand names, trademarks, etc.) included in this book are owned by their respective copyright holders. Every effort has been exerted to locate and seek permission to use these materials from their respective copyright owners. The publisher and authors do not represent nor claim ownership over them.
Published by the Department of Education Secretary: Leonor Magtolis Briones Undersecretary: Diosdado M. San Antonio
Printed in the Philippines by ________________________
Department of Education – Region V
Office Address: Regional Center Site, Rawis, Legazpi City 4500 Telefax: 0917 178 1288 E-mail Address: region5@deped.gov.ph
Development Team of the Module
Author: Eleonor C. Caparos Editors: Noel V. Ibis, Christian M. Espiritu Reviewer: Chozara P. Duroy Illustrator: Kristal Grace C. Ilao Layout Artist: Jogene Alilly C. San Juan Management Team: Gilbert T. Sadsad, Francisco B. Bulalacao Jr., Grace U. Rabelas, Ma. Leilani R. Lorico, Emma T. Soriano, Amy B. Dumail
4
Science
Quarter 1 – Module 2: “Changes in Solid Materials”
Introductory Message
This Self-Learning Module (SLM) is prepared so that you, our dear learners, can continue your studies and learn while at home. Activities, questions, directions, exercises, and discussions are carefully stated for you to understand each lesson.
Each SLM is composed of different parts. Each part shall guide you step-by-step as you discover and understand the lesson prepared for you.
Pre-tests are provided to measure your prior knowledge on lessons in each SLM. This will tell you if you need to proceed on completing this module or if you need to ask your facilitator or your teacher’s assistance for better understanding of the lesson. At the end of each module, you need to answer the post-test to self-check your learning. Answer keys are provided for each activity and test. We trust that you will be honest in using these.
In addition to the material in the main text, Notes to the Teacher are also provided to our facilitators and parents for strategies and reminders on how they can best help you on your home-based learning.
Please use this module with care. Do not put unnecessary marks on any part of this SLM. Use a separate sheet of paper in answering the exercises and tests. And read the instructions carefully before performing each task.
If you have any questions in using this SLM or any difficulty in answering the tasks in this module, do not hesitate to consult your teacher or facilitator.
What I Need to Know
[icon: target]
This module was designed and written to help you understand that matter undergo different changes. Such changes are physical changes if the objects only change in size and shape and no new material was formed from the change. In this lesson you will be dealing with the physical changes that happens to solid materials in terms of their sizes and shapes.
The lesson focuses on:
- Lesson 1 – Changes in solid materials when bent;
- Lesson 2 – Describe changes in solid materials when they are pressed;
- Lesson 3 – Changes in solid materials when hammered; and
- Lesson 4 – Changes in solid materials when cut. (S4MT-Ie-f-5)
After going through this module, you are expected to:
- identify characteristics of solid materials in terms of size, shape, texture;
- describe what happens to the solid materials when they are bent;
- identify some changes happened to solid materials when pressed;
- describe the change/s that happen/s in solid materials when pressed;
- identify some ways of changing solid materials in terms of size, shape, texture by hammering;
- identify materials which can be cut;
- describe the change/s that happen/s in solid materials when hammered; and
- describe what happens to solids when cut.
What I Know
[icon: pencil]
A. Directions: Using the puzzle, find 5 objects written inside the box below that undergo changes in their original appearance. Words can be looped horizontally and vertically. Write your answers in your Science notebook.
paper pillow metal spoon
chalk bread
| M | E | T | A | L | S | P | O | O | N |
|---|---|---|---|---|---|---|---|---|---|
| E | D | E | F | G | H | A | J | K | B |
| P | I | L | L | O | W | P | K | R | R |
| A | Q | P | I | L | L | E | W | G | E |
| L | E | L | A | M | E | R | A | B | A |
| W | K | L | A | H | C | D | A | L | D |
B. Directions: Put a check mark (√) on the space provided if the given materials can be bent, pressed, hammered, or cut and (X) mark if not. Do this in your notebook.
_____1. bread _____2. spoon _____3. candy wrapper _____4. bottle cap _____5. water
C. Directions: Form a word from the given jumbled letters. Write your answer/s in your notebook.
- G D I B E N N – _______________
- P R S I S E G N – _______________
- G N I R E M M A H – _______________
- C T U T I G N – _______________
- S C A H E N G – _______________
What a good start! Keep on moving.
Lesson 1 “Changes in Solid Materials When Bent”
Hello! I am here again! Are you ready for another journey? Have you ever tried bending some of your school stuff and noticed some changes in them as you bent them? What do you think would happen if you accidentally pressed the metal spoon as you are using it?
This module will help you identify the different characteristics of solid materials and discover how they undergo such changes when you apply certain forces on them. Sit back and enjoy the fun of learning and discovering as you go through the different activities in this lesson.
What’s In
[icon: puzzle pieces]
Directions: Put a smiley face on the solid material and a sad face if it is not. Do this in your notebook.
____1. juice ____2. cup ____3. flower vase ____4. soy sauce ____5. bottle ____6. paper ____7. vinegar ____8. notebook ____9. pencil ____10. table
Good job! You got it right!
What’s New
[icon: seedling]
Note to Parent/Guardian: Guide your children while doing the various activities in this module. Remind them to observe precautionary measures and to be careful in handling the materials while performing the activity.
To the Learner:
Directions: Perform each activity and answer the questions that follow. Write your answers in your Science notebook.
Activity 1: “What Happens to Solid Materials When Bent?”
What you need:
plastic ruler paper clip 1 pc of rubber slippers electric wire metal spoon tie wire
What to do:
- Bend each of the given materials. Observe and describe what happens to each material.
- Copy and fill-out the table below in your notebook.
| Materials | What happened to the material when bent? |
|---|---|
| plastic ruler | |
| electric wire | |
| metal spoon | |
| paper clip | |
| rubber slippers | |
| tie wire |
Guide Questions:
- What did you do to change the different materials?
- What are the changes that took place after doing such actions?
Activity 2: “Identify My Characteristics”
Directions: Color the box red if there is a change in shape, yellow if there is a change in size, blue if there is no change and black if there is a change in both the size and shape.
| 1. [illustration: bent looped strip] | [transcriber’s note: empty box to be colored] |
| 2. [illustration: bent object with a rounded end] | [transcriber’s note: empty box to be colored] |
| 3. [illustration: coiled wire, bent] | [transcriber’s note: empty box to be colored] |
| 4. [illustration: bent wire with a loop] | [transcriber’s note: empty box to be colored] |
| 5. [illustration: four bent wire pieces] | [transcriber’s note: empty box to be colored] |
[transcriber’s note: the table has no header row in the original; the header row above is empty]
Illustrated by: Kristal Grace C. Ilao
What is It
Points to Remember:
- Solid materials can be bent. When bent, these materials may change their size and shape. No new material is formed. Only the physical appearance of the materials is changed.
- The changes that this materials underwent is called physical change.
- Bending a steel bar/iron in industry is an example of bending of solid materials.
What’s More
Directions: Draw the following shapes stated below to describe the changes that took place in each material.
Activity 1: “What Changes Took Place, Anyway?”
[illustration: square] if there is a change in shape [illustration: circle] if there is a change in size [illustration: heart] if there is no change [illustration: star] if there is a change in both the size and shape
- bent rubber slippers – ____________
- bent tie wire – ____________
- bent metal spoon – ____________
- bent staple wire – ____________
- bent paper clip – ____________
What I Have Learned
Directions: Complete the statement. Write your answers in your Science notebook.
When materials are bent, there is a change in 1. __________, 2. ___________, but 3. ___________ new material is 4. _____________. Only the 5. _____________ ______________ of the materials is changed.
What I Can Do
Directions: Answer the questions briefly. Write your answers in your Science notebook.
a. Draw and identify situations at home where bending of solid material is applied.
(Apply your knowledge about changes in matter to solve some of your problems in your daily life).
b. You and your brother are playing chase me, and you accidentally (tear, cut, split) the front part of your rubber slipper. You saw a piece of safety pin on the sidewalk. What will you do to fix your slippers?
c. Mang Jose bought several pieces of tie wire from the hardware. On his way home, some pieces of the tie wire were accidentally bent. Describe what change/s happened to the property/ies of the tie wire when it was bent.
Yes! What a remarkable effort.
Assessment
A. Directions: Describe and identify the changes that took place in each picture. Write your answers in your Science notebook.
- [illustration: hands pressing a soft folded material]
- [illustration: heart-shaped wire and a triangle-shaped wire]
- [illustration: bent metal spoon]
- [illustration: two bent paper clips]
- [illustration: curved strip being bent by hand]
Illustrated by: Kristal Grace C. Ilao
B. Directions: Put a check mark (√) on the proper column that best describes the characteristics of each material when bent. Write your answer in your Science notebook.
| Materials | Change in Size | Change in Shape | Was new material formed? Yes | Was new material formed? No |
|---|---|---|---|---|
| 1. plastic ruler | ||||
| 2. staple wire | ||||
| 3. metal spoon | ||||
| 4. rubber slippers | ||||
| 5. paper clips | ||||
| 6. steel | ||||
| 7. pin | ||||
| 8. rubber shoes |
[transcriber’s note: the table’s header is two stacked rows in the original: “Materials | Change in | Was new material formed?” over “Size | Shape | Yes | No”; the header row above joins them]
[transcriber’s note: table continued from the previous page]
| Materials | Change in Size | Change in Shape | Was new material formed? Yes | Was new material formed? No |
|---|---|---|---|---|
| 9. safety pin | ||||
| 10.tie wire |
That’s incredible! You did well in this lesson.
Additional Activities
Directions: Make a creative artwork using the materials from the first activity given in the What’s New part. When you’re done, identify some changes that took place while making it. Do this in your Science notebook.
Congratulations! I am happy that you have accomplished the tasks given. This time we will explore what happens when materials are pressed. Are you ready?
Lesson 2: “Changes in Solid Materials when they are Pressed”
As you look around, you can see many solid materials. Even at home, solid materials can be found. An example of which is the modelling clay which is used for recreational activities and for developing fine motors of children. Have you experienced pressing a clay? What did you observe? What kind of change will it undergo? Does it change its shape or size?
In this lesson, you will discover how solid materials undergo such changes when they are pressed.
What’s In
Directions: Using the crossword puzzle, find 5 solid materials that can be pressed. Words can be looped horizontally and vertically. Write your answers in your Science notebook.
bread dough clay potato banana
What’s New
Directions: Perform the different activities indicated in this lesson. Write your answers in your Science notebook.
| A | B | C | S | T | R | E | B | R | E | A | D | G | O |
| B | D | E | F | G | H | I | J | K | L | M | N | B | P |
| P | O | T | A | T | O | X | Y | Z | A | B | C | T | Q |
| N | Q | F | O | L | D | I | N | G | I | F | D | E | R |
| D | P | O | N | C | L | A | Y | J | H | G | E | A | G |
| C | R | S | T | B | A | N | A | N | A | N | G | R | N |
| L | W | V | U | H | G | H | R | T | U | I | O | I | I |
| O | X | Y | Z | A | A | B | C | D | E | F | G | N | T |
| T | L | M | X | D | O | U | G | H | L | I | N | G | L |
| H | U | T | T | I | N | G | J | I | H | E | D | A | E |
| G | N | I | R | E | C | D | E | F | G | F | C | B | M |
[transcriber’s note: the letter grid is a word-search puzzle; the header row above is empty in the original]
Good job! You got it right!
Can you imagine how different solid materials change its physical properties? Can you describe the changes that would take place in solid materials when they are pressed?
Note to Parent/Learning Facilitator:
Always remind your child to observe the following precautionary measures in doing this activity: Be careful in handling empty bottles. Use gloves to protect your hands. Remember not to eat the leftover food items used in this activity.
Remind your child of the safety protocols especially washing their hands before and after handling the materials. Materials should be sanitized as well. Always guide and supervise your child at all times while doing this activity.
Activity 1: “What Happens to Solid Materials when they are Pressed?”
What you need:
- ripe banana
- pandesal or any kind of bread
- modeling clay
- paper cup
- small wood/empty glass/bottle/large stone
What to Do:
- Using a piece of wood or empty glass or bottle or large stone, press each of the given materials.
- Observe and describe what happens to each material.
- Copy the table below in your notebook and record your observations.
| Materials | What happened to material when pressed? |
|---|---|
| modeling clay | |
| ripe banana | |
| pandesal or any kind of bread | |
| paper cup |
Guide Questions:
- What happened to solid materials when pressed?
- Was there a new material formed when the solid materials were pressed?
- What characteristics of solid materials were evident in this activity?
Great! You performed the activity well. For better understanding of the activities, read and understand the information below.
What is It
Points to Remember:
[illustration: a boy holding stones, a folded shirt, a crumpled cloth, and hands pressing clay with a mold and a rolling pin] Illustrated by: Kristal Grace C. Ilao
Solid materials have definite shape and volume. They have different characteristics/properties such as: size, shape, color, texture, and weight.
Solid materials can be pressed. When pressed, these materials may change their size and shape. Other solid materials may also change their texture when pressed. However, no new material is formed because only the physical appearance of the material is changed.
What’s More
Directions: Using the letters of the alphabet, decode the numbers to get the hidden words which correspond to the materials that can be pressed. Write your answer in your Science notebook.
Activity 1: “Materials Found Anywhere”
| A | B | C | D | E | F | G | H | I | J | K | L | M |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 |
| N | O | P | Q | R | S | T | U | V | W | X | Y | Z |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 14 | 15 | 16 | 17 | 18 | 19 | 20 | 21 | 22 | 23 | 24 | 25 | 26 |
Activity 2: “Materials that can be Pressed”
Directions: Study the pictures below. Draw a star ☆ before the number if the picture shows a material that can be pressed and a circle ◯ if not. Answer this in your Science notebook.
- [illustration: two halves of a round object with a dark center]
| 13 | 15 | 4 | 5 | 12 | 12 | 9 | 14 | 7 | 3 | 12 | 1 | 25 | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
- [illustration: a group of nuts, bolts, and screws]
| 18 | 9 | 16 | 5 | 2 | 1 | 14 | 1 | 14 | 1 | |
|---|---|---|---|---|---|---|---|---|---|---|
| 13 | 1 | 19 | 8 | 5 | 4 | 16 | 15 | 20 | 1 | 20 | 15 | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 16 | 12 | 1 | 19 | 20 | 9 | 3 | 2 | 15 | 20 | 20 | 12 | 5 | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 16 | 1 | 14 | 4 | 5 | 19 | 1 | 12 |
|---|---|---|---|---|---|---|---|
[illustration: a pile of stones]
[illustration: three plastic bottles]
[illustration: three flat round objects]
[illustration: a flat rectangular block with a patterned top]
[illustration: a block with segmented pieces]
[illustration: three drinking glasses]
[illustration: a shirt on a hanger]
[illustration: a coiled cable or rope]
Illustrated by: Kristal Grace C. Ilao
What I Have Learned
Directions: Complete the statement. Write your answers in your Science notebook.
- _____ materials can be pressed depending on the property of the material.
- When solid materials are pressed, these may _____ their size and shape.
- Other solid materials may also change their _____ when pressed.
4-5. No new material is _____ because only the _____ of the material is changed.
What I Can Do
Directions: Draw and identify situations in your home where pressing of solid materials is applied. Write your answers in your Science notebook.
[transcriber’s note: blank answer box for the learner’s drawing and identification]
Assessment
A. Directions: Read each question / statement then answer the following questions that follow.
For questions 1 – 3 describe and identify the changes that took place in each picture. Write your answers in your Science notebook.
- [illustration: hands pressing a piece of cloth on a table]
[transcriber’s note: blank answer box] - [illustration: hands pressing a flat, soft mass]
[transcriber’s note: blank answer box] - [illustration: hands pressing a long soft roll]
[transcriber’s note: blank answer box]
Illustrated by: Kristal Grace C. Ilao
- Angelo is playing with his modeling clay. As he pressed it, he was able to make different toys as shown in the pictures below.
[illustration: three panels showing a clay ball, a clay rod, and a flat clay tray] Illustrated by: Kristal Grace C. Ilao
Which of the following describes the modelling clay when it was pressed by Angelo? The clay changed its_____.
a. size and color b. size and shape c. volume and odor d. volume and color
- Liza flattened a pizza dough using a rolling pin. Which of the following actions did she use to change the pizza dough’s shape?
a. bending b. hammering c. pressing d. stretching
B. Directions: Put a check mark (✓) on the space provided if the given materials can be pressed and (X) mark if not. Do this in your notebook.
_____ 1. metal spoon _____ 2. ripe papaya _____ 3. pillow _____ 4. paper _____ 5. mat _____ 6. tiles _____ 7. sandwich _____ 8. stuffed toys _____ 9. wooden plate _____ 10. ceramic pots
CONGRATULATIONS! You did well today!
Illustrated by: Kristal Grace C. Ilao
Additional Activities
Have you ever seen a baker baking a piece of bread? What particular ingredients does he use? Identify some changes that took place while he is pressing the dough.
Congratulations! I am happy that you have accomplished the tasks given. This time we will explore on the changes in solid materials when hammered. Are you ready?
Lesson 3
“Changes in Solid Materials When Hammered”
Do you know that stone, wood, nail and tin cans are some examples of solid materials? These materials have definite shape and volume. They have different characteristics and properties such as: size, shape, color, texture, and weight. Can you imagine how these solid materials can change their characteristics or properties?
This module will help you discover how solid materials undergo such changes.
What’s In
Directions: Draw a ball ([illustration: ball]) if the object is a solid material and a glass of water ([illustration: glass of water]) if it is not. Do this in your notebook.
_____1. water _____2. computer _____3. bed _____4. curtain _____5. bottle _____6. dipper _____7. soy sauce _____8. choco milk _____9. bag _____10. glass
Good job! You got it right!
What’s New
Directions: Perform the different activities indicated in this lesson. Write your answers in your Science notebook.
Note to Parent/Learning Facilitator:
Always remind your child to observe the following precautionary measures in doing this activity: Be careful in handling empty bottles. Use gloves to protect your hands. Remember not to eat the leftover food items used in this activity.
Remind your child of the safety protocols especially washing their hands before and after handling the materials. Materials should be sanitized as well. Always guide or supervise your child at all times while doing this activity.
Activity 1: “How Can I Change Them?”
What you Need:
chalk bottle cap hammer tin can stone nail vase
- [illustration: pile of chalks] chalks
- [illustration: tin can] tin can
- [illustration: nails] nails
- [illustration: bottle cap] bottle cap
- [illustration: pile of stones] stones
- [illustration: vase] vase
Illustrated by: Kristal Grace C. Ilao
What to Do:
- Observe carefully the pictures above and analyze how the following materials can change their properties.
- Copy and fill-out the table in your Science notebook.
| Materials | When hammered (use hammer or big rocks) |
|---|---|
| chalk | |
| tin can | |
| nails | |
| bottle cap | |
| stone | |
| vase |
Guide Questions:
- What did you do to change the different materials?
- What changes took place after doing such actions?
Activity 2: “What Happens to Solid Materials when Hammered?”
What you Need:
block of wood piece of hollow block broken plate piece of galvanized iron hammer
What to do?
- Hammer each of the given materials. Observe what happens.
- Record your observations in your notebook using the table below.
- Answer the following questions that follow. Write your answers on your notebook.
| Materials | What happened to material when hammered? |
|---|---|
| block of wood | |
| broken plate | |
| piece of hollow block | |
| piece of galvanized iron |
Guide Questions:
- What happened to solid materials when they were hammered?
- Was there a new material formed when solid materials were hammered?
Great! You performed the activities well. For better understanding of the activities, read and understand the information below.
What is It
Points to Remember:
Solid materials have definite shape and volume. They have different characteristics/properties such as: size, shape, color, texture, and weight. They can be changed by hammering. This action may change the size, shape, texture, and color of the object. When solid materials are hammered, only the physical appearance is changed. No new material is formed.
What’s More
Directions: Draw the following shapes to describe the changes that took place in each material listed below. Do this in your Science notebook.
Activity 1: “What Changes Took Place, Anyway?”
□ if there is a change in shape ○ if there is a change in size ♡ if there is no change ☆ if there is a change in both the size and shape
- hammering of hard wood – ____________
- hammering of steel – ____________
- hammering of rubber band – ____________
- hammered tin can – ____________
- hammered glass – ____________
Activity 2: “The Hammer Web”
Directions: Draw and color the different solid materials found in your community that can be hammered inside the circles. Do this in your Science notebook.
[illustration: six empty oval circles arranged around a hammer]
Illustrated by: Kristal Grace C. Ilao
What I Have Learned
Directions: Supply the missing words / phrases to complete the statement. Write your answers in your Science notebook.
I learned that:
When materials are hammered there is a change in 1. ________, 2. , 3. but 4. ___________ new material is 5. _____________.
What I Can Do
Directions: Choose only one task to do and answer briefly the question. Write your answers in your Science notebook.
- Draw and identify situations in your home where hammering of solid materials were applied.
(Apply your knowledge about changes in matter to solve some of your problems in your daily life).
- You and your brother are playing inside your home, and you accidentally broke a chair made up of wood. What activities will you do to fix the chair?
Assessment
A. Directions: Check the appropriate column for the pictures shown in the table.
| Materials | Changes in: Size | Changes in: shape | Changes in: texture | Changes in: color | New materials formed: Yes | New materials formed: No |
|---|---|---|---|---|---|---|
| 1. [illustration: tin can] hammered tin can | ||||||
| 2. [illustration: hollow blocks] hammered hollow blocks | ||||||
| 3. [illustration: sword being hammered] hammered sword | ||||||
| 4. [illustration: bottle cap] hammered bottle cap | ||||||
| 5. [illustration: stone] hammered stone |
Illustrated by: Kristal Grace C. Ilao
B. Directions: Choose the letter of the best answer. Write it in your Science notebook.
- Which of the following changes described when the stones were hammered by Angelo? The stones changed their____.
[illustration: several gray stones]
Illustrated by: Kristal Grace C. Ilao
a. size and color b. size and shape c. volume and odor d. volume and color
C. Directions: Describe the changes that took place in questions 7 and 8.
Mico hammered a tin can. What changes did the tin can undergo?
[illustration: flattened striped object]
Illustrated by: Kristal Grace C. Ilao
Change in 7. __________ and 8. _______________
D. Directions: Draw 2 solid materials that can be hammered and identify the changes that take place on it.
[illustration: two empty rounded boxes for drawing]
- Changes in ________________ 10. Changes in _______________
E. Directions. For numbers 11-15. Choose the activities that shows hammering. Write the letter of the correct answer in your Science notebook.
a. [illustration: person holding a tool, pointing] b. [illustration: person getting a haircut] c. [illustration: person swinging a hammer overhead] d. [illustration: child hammering on the ground] e. [illustration: two men working with a toolbox] f. [illustration: person hammering metal on an anvil] g. [illustration: person bending a metal bar] h. [illustration: hands wringing out cloth] i. [illustration: person striking a block with a hammer] j. [illustration: person sawing logs]
Illustrated by: Kristal Grace C. Ilao
Additional Activities
Have you seen a carpenter building a house? What happens to the pieces of wood and other construction materials when hammered? Can you identify some changes that took place while building a house?
Congratulations! I am happy that you have accomplished the tasks given. This time we will explore on the changes in solid materials when cut. Are you ready?
Lesson 4 – “Changes in Solid Materials When Cut”
In the past lessons you’ve learned that when materials were hammered, you can change the size and shape. You also found out that only the physical appearance of the material changes when hammered.
In this lesson you will be taught on how to identify and describe the physical changes in the properties of matter as you cut them.
What’s In
Directions: Write true if the statement is correct and false if not. Do this in your notebook.
_____1. Solid materials can be hammered. _____2. A new material is formed when you hammer an object. _____3. A hammer can be used for beating/striking or pounding objects. _____4. A piece of hollow block and tin cans are objects that can be hammered. _____5. When solid materials are hammered, they don’t change its physical appearance.
You are catching on!
What’s New
Directions: Perform the different activities indicated in this module. Write your answers in your Science notebook.
Note to Parent/Learning Facilitator: Remind your child to observe the following precautionary measures: Be careful in handling scissors. Use gloves to protect their hands. Always guide and supervise your child while doing this activity.
Activity 1: “What Happens to Solid Materials When Cut?”
What you Need:
1 pc. of: used paper (any kind of paper) used cloth (any kind) small cardboard (any karton) pair of scissors used plastic cover (any kind)
2 pcs. of: candy wrapper, leaves
What to Do:
- Using a pair of scissors, cut each of the given materials. Observe what happens to each material.
- Record your observations in your science notebook using the table.
| Materials | What happened to the material when cut? |
|---|---|
| piece of paper | |
| piece of cardboard | |
| candy wrapper | |
| leaves | |
| plastic cover | |
| piece of cloth |
Guide Questions:
- What did you do to the different materials to change them?
- What changes took place after doing such actions?
- Was a new material formed when the solid material was cut?
Activity 2: “What are the properties of materials that changed?”
Directions: Choose the appropriate phrase in the box that best describes the properties of matter that you cut in the previous activity. Put them in the proper column.
change in size change in shape change in both size and shape no changes at all
- cut piece of paper –
- cut plastic cover –
- cut leaves –
- cut plastic wrapper –
- cut piece of cloth –
Great discovery! Keep moving you are improving.
What is It
Points to Remember:
Solid materials can be cut. When cut, these materials may change their size and shape but no new material is formed. Hence, only the physical appearance of the solid material is changed when cut.
Not all solid materials can be cut using simple scissors. Some solid materials, like iron, steel, etc., can be cut using sophisticated cutters (i.e. metal cutter/machine cutters).
Spectacular! You have just mastered it.
What’s More
Directions: Underline the changes that happen to the given objects when cut. Do it in your Science notebook.
Activity 1: “What Changes in the Physical Properties Took Place?”
- piece of cardboard when cut change in (size, shape, no change)
- piece of cloth when cut (size, shape, no change)
- candy wrapper when cut (size, shape, no change)
- leaves when cut (size, shape, no change)
- piece of paper (size, shape, no change)
Directions: Give 5 examples of materials that change their physical appearance cut. Write it in your Science notebook.
Activity 2: “Materials that change their Physical Appearance when Cut”
What I Have Learned
Directions: Supply the missing words / phrases to complete the statement. Write your answers in your Science notebook.
I learned that:
Solid materials can be 1. ______. When cut, these materials may change their 2. ________, and 3. ________ but no 4. ________ material is 4. _____________. Only the 5. ____________________ of the materials is changed.
What I Can Do
Directions: Answer the questions briefly. Write your answers in your Science notebook.
Write situations in your home, school, and community where cutting of solids are applied and describe the changes that happened.
SOLID MATERIALS
- found at home
- found at school
- found in community
Superb! No one can stop you from doing your best.
Assessment
A. Directions: Choose the materials from the box that can be cut. Write your answer in your notebook.
stone water stainless steel cabinet pail made of steel juice plastic cover colored paper disposable cup leaves newspaper string beans magazines plastic bag shampoo sachet cartolina
B. Directions: Choose the correct letter and write it in your notebook.
All of these are characteristics of solid, EXCEPT one. Which one is it?
a. Solids are hard.
b. Solids have compact particles.
c. Solids may change its physical appearance.
d. Solids do not change its shape when you cut them.Which of the following materials can be cut by scissors?
a. soft drinks bottle
b. magazines
c. metal spoon
d. flower vaseAngela cuts a piece of bond paper. As shown in the picture below, what kind of change happened when the bond paper was cut?
[illustration: a square piece of bond paper on the left, with an arrow pointing right to many small torn pieces scattered on the right]
Illustrated by: Kristal Grace C. Ilao
4-5. Complete the graphic organizer below to describe the changes that might happen to the property/ies of the candy wrapper when cut.
[chart: graphic organizer; untitled]
- Candy wrapper (top box)
- Two blank lines below, linked from Candy wrapper by arrows: _____________ and _____________
FANTASTIC! Well Done!
Additional Activities
Directions: Cut at least 6 or 8 pictures of materials that change their properties when cut. Paste them in your Science notebook.
[transcriber’s note: this page is printed upside down; it is transcribed in reading order]
Answer Key
LESSON 1
What I Know
[transcriber’s note: the word-search grid is printed rotated; rows are given as they appear on the page, with the red letters not marked]
N O O P S L A T E M B K J A H G F E D E R R K P W O L L I P E G W E L L I P Q A A B A R E M A L E L D L A D C H A L K w
A.
What’s In
B. C.
- bending ✓
- pressing ✓
- hammering ✓
- cutting ✓
- changes ✓
What’s New
ACTIVITY 1: “What Happens to Solid Materials when Bent?”
| Materials | What happened to the material when bent? |
|---|---|
| 1. plastic ruler | change in shape |
| 2. electric wire | change in size and shape |
| 3. metal spoon | change in shape |
| 4. paper clip | change in size and shape |
| 5. rubber slippers | change in shape |
| 6. tie wire | change in size and shape |
[illustration: ten numbered boxes (1 to 10), each with a face icon]
What’s More
ACTIVITY 2: “Identify My Characteristics”
- bent them
- change in size and shape
- red
- red
- black
- red
- black
[transcriber’s note: the Activity 2 answers are printed out of order on the page and could not be matched to item numbers with certainty]
- square
- star
- square
- star
- star
What I Have Learned
- size
- shape
- no
- formed
- physical appearance
What I Can Do
Pupils’ answer may vary.
Assessment
A.
- change in size
- change in size and shape
- change in shape
- change in size and shape
- change in shape
[transcriber’s note: this page is printed upside down; it is transcribed in reading order]
LESSON 2
What’s In
[transcriber’s note: the word-search grid is printed rotated; rows are given as they appear on the page]
O G D A E R B E R T S C B A P B N M L K J I H G F E D B Q T C B A Z Y X O T A T O P R E D F I G N I D L O F Q N G A E G H J L A Y C N O P D N R G N A N A N A B T S R I I I O I U T R H G H U V W N T N G F E D C B A A Z Y X G L G N I L H G U O D X M L K E A D E H I J G N I T T U C M B C F H T O L C E R I N G
What’s New
ACTIVITY 1: “What Happens to Solid Materials when Pressed?”
| Material | What happened to the material when pressed? |
|---|---|
| modeling clay | change in size and shape |
| ripe banana or any pandesal kind of bread | change in size and shape |
| paper cup | change in size and shape |
Answers to Guide questions:
- They changed in size and shape.
- No new material was formed.
- Some solid materials change in size and shape but only the physical appearance of the material is changed.
What’s More
ACTIVITY 1: “Materials Found Anywhere”
- modelling clay
- ripe banana
- mashed potato
- plastic bottle
- pandesal
ACTIVITY 2: “Materials that can be Pressed”
- star
- circle
- star
- circle
- star
- circle
- star
- circle
- star
- circle
What I Have Learned
- solid
- change
- texture
- formed
- physical appearance
What I Can Do
Pupils’ answer may vary.
Assessment
A.
- change in texture
- change in size and shape
- change in size and shape
- b
- c
B.
- X
- √
- √
- X
- X
- X
- √
- √
- √
- √
Additional Activities
Pupils’ answer may vary.
B.
| Material | Change in Shape | Change in Size | Was new material formed? Yes | Was new material formed? No |
|---|---|---|---|---|
| 1. plastic ruler | √ | √ | ||
| 2. staple wire | √ | √ | √ | |
| 3. metal spoon | √ | √ | ||
| 4. rubber slippers | √ | √ | ||
| 5. paper clips | √ | √ | √ | |
| 6. steel | √ | √ | √ | |
| 7. pin | √ | √ | ||
| 8. rubber shoes | √ | √ | ||
| 9. safety pin | √ | √ | √ | |
| 10. tie wire | √ | √ | √ |
[transcriber’s note: this table is printed upside down, and the tick positions could not be matched to the column headings with certainty; the column placement above follows the most likely reading and should be checked against the page image]
Pupils’ answer may vary.
LESSON 3
[transcriber’s note: this page is printed upside down in the scan; the content below follows the reading order of the lesson, and the placement of the picture grid and check marks is approximate]
What’s In
- [illustration: item picture]
- [illustration: item picture]
- [illustration: item picture]
- [illustration: item picture]
- [illustration: item picture]
- [illustration: item picture]
- [illustration: item picture]
- [illustration: item picture]
- [illustration: item picture]
- [illustration: item picture]
What’s New
ACTIVITY 1: “How Can I Change Them?”
| Materials | When hammered |
|---|---|
| chalk | Change in size and shape |
| tin can | Change in size and shape |
| nails | Change in size and shape |
| bottle cap | Change in size and shape |
| stone | Change in size and shape |
| vase | Change in size and shape |
Answers to Guide Questions:
- hammered,
- changes in size, shape
ACTIVITY 2: “What happens to Solid Materials when Hammered?”
| Materials | When hammered |
|---|---|
| No block of wood | change in size, shape and texture |
| broken plate | Change in size and shape |
| piece of hollow block | Change in size and shape |
| piece of galvanized iron | Change in size and shape |
Answer to Guide Questions:
- Changes in size and shape.
- No new material is formed.
What’s More
Activity 1: “What changes Took Place, Anyway?”
[transcriber’s note: the numbers 1 to 5 are printed in reverse order on the scan; the answer lines are not legible as text]
Activity 2: “The Hammer Web”
Pupils’ answers may vary.
- size
- shape
- texture
- no
- formed
a. Pupils’ answer may vary. b. Pupil’s answer may vary.
| Materials | Changes in: Size | Shape | Texture | Color | New materials formed: Yes | No |
|---|---|---|---|---|---|---|
| 1. Hammered tin can | [?] | [?] | [?] | [?] | [?] | [?] |
| 2. Hammered hollow blocks | [?] | [?] | [?] | [?] | [?] | [?] |
| 3. Hammered wood | [?] | [?] | [?] | [?] | [?] | [?] |
| 4. Hammered bottle cap | [?] | [?] | [?] | [?] | [?] | [?] |
| 5. hammered stone | [?] | [?] | [?] | [?] | [?] | [?] |
[transcriber’s note: the check marks in this table are printed as ✓ in the scan but their column positions could not be read reliably; each cell is marked [?]]
What I Have Learned
Pupils’ answers may vary.
What I Can Do
Pupils’ answer may vary.
Assessment
- b. size and shape
- size
- shape
- 2 solid materials – Answer vary
- Pupils’ answer may vary.
- a
- c
- d
- e
- i
Additional Activities
Pupils’ answer may vary.
LESSON 4
What’s In
- true
- true
- true
- true
- flase
What’s New
ACTIVITY 1: “What Happens to Solid Materials when Cut?”
| Material | What happened to the material when cut? |
|---|---|
| piece of paper | Change in size and shape |
| piece of cardboard | Change in size and shape |
| candy wrapper | Change in size and shape |
| leaves | Change in size and shape |
| plastic cover | Change in size and shape |
| piece of cloth | Change in size and shape |
Answers to Guide Questions:
- cut them
- change in size and shape
- no
ACTIVITY 2: “What are the Properties of Materials that Changed?”
- change in both size and shape
- change in both size and shape
- change in both size and shape
- change in both size and shape
- change in both size and shape
What’s More
ACTIVITY 1: “What Changes in Properties that Took Place?”
- size, shape
- size, shape
- size, shape
- size, shape
- size, shape
ACTIVITY 2: “Materials that change their Physical Properties”
Pupils answer may vary.
What I Have Learned
- cut
- size
- shape
- new
- physical appearance
What I Can Do
Pupils’ answers may vary.
Assessment
A.
- leaves
- plastic cover
- colored paper
- string beans
- disposable cup
- newspapers
- magazines
- plastic bags
- cartolina
- shampoo sachet
B.
- d
- b
- change in size and shape
4-5. change in size and shape
Additional Activities
Pupils’ answers may vary.
References
Abutay, Lelani R., et. al. Science 4 Learner’s Material, 29-37. Pasig City: Department of Education, 2015.
Abutay, Lelani R., et. al., Science 4 Teacher’s Guide, 36-48. Pasig City: Department of Education, 2015.
For inquiries or feedback, please write or call:
Department of Education – Bureau of Learning Resources (DepEd-BLR) Ground Floor, Bonifacio Bldg., DepEd Complex Meralco Avenue, Pasig City, Philippines 1600
Telefax: (632) 8634-1072; 8634-1054; 8631-4985
Email Address: blr.lrqad@deped.gov.ph * blr.lrpd@deped.gov.ph
Leave a Reply