Science 10 Quarter 1 Module 2: Plate Boundaries

Grade 10 Science Q1 Module 2 on divergent, convergent, and transform fault plate boundaries, with activities, a model project, and answer key.

This is the Science 10 Quarter 1 Module 2 self-learning module on plate boundaries, from the Alternative Delivery Mode (ADM) series of DepEd Region I (First Edition, 2020). It follows Module 1 on plate tectonics and the distribution of earthquake epicenters, active volcanoes, and major mountain belts. After working through it, Grade 10 learners can describe divergent, convergent, and transform fault boundaries and find them on a world map of plates.

On this page 7 sections

What learners will learn

After going through this module, learners are expected to:

  • describe the different types of plate boundaries (S10-Ia-j-36.2)
  • differentiate the types of convergent boundaries
  • identify the places and plates that lie on the different types of boundaries

What the module contains

The module has one lesson, “Plate Boundaries,” set out in the usual self-learning module parts:

  • What I Know: a 15-item multiple-choice pretest
  • What’s In: a plate tectonics crossword puzzle that reviews Module 1
  • What’s New: Activity 1, “Read Me! Understand Me!”, a short reading with five questions
  • What is It: the main discussion of the three plate boundaries
  • What’s More: three enrichment activities, each with an assessment: “Fill the Missing Piece!” (completing a table of boundaries), “Spot the Difference” (comparing the three convergent boundaries), and “Find the Boundary on the Map!”
  • What I Have Learned: a fill-in-the-blanks summary paragraph
  • What I Can Do: building a paper model of plate boundaries from cutouts, scored with a rubric
  • Assessment: a 15-item posttest
  • Additional Activity: “Find Me,” ten questions whose answers are hidden in a word search
  • Answer Key and spare learner copies of the cutouts and word search

Key ideas: plates and why they move

The lithosphere is the Earth’s crust and upper mantle. It is broken into large and small plates, including the Philippine Plate, that move slowly but constantly. The module explains that convection current in the Earth’s interior moves the plates. Plate boundaries are the lines at the edges of these plates.

There are two kinds of crust:

  • Continental crust: thicker but less dense
  • Oceanic crust: thinner and denser

Where plates meet, their movement causes earthquakes, volcanism, and mountain building.

Key ideas: the three types of plate boundaries

Divergent boundary

Two plates move apart, creating tension. Magma rises from the mantle, cools, and forms new oceanic crust (young seafloor). This is why it is also called a constructive boundary.

  • Between oceanic plates, divergence forms a mid-ocean ridge (seafloor spreading).
  • Between continental plates, it forms a continental rift valley. The East African Rift is one example used in the tests.
  • Examples in the module: South American and African plates, Pacific and Nazca plates, North American and Eurasian plates.

Convergent boundary

Two plates move toward each other. Because the oceanic plate is destroyed here, it is also called a destructive boundary. The module describes three types:

TypeWhat happensFeatures formed
Oceanic-continentalThe denser oceanic plate bends down into the mantle (subduction) and its edge meltsTrench and a continental volcanic arc parallel to it; earthquakes
Oceanic-oceanicThe older oceanic plate subductsTrench and an island volcanic chain parallel to it; earthquakes
Continental-continentalBoth plates collide and buckle up in a compression zoneMountain ranges such as the Himalayas; no subduction, no trench, no volcanoes

Examples in the module: Eurasian and Philippine plates, Nazca and South American plates, and Pacific and Australian plates.

Transform fault boundary

Two plates slide past each other. It is also called a strike-slip fault. Rocks along the boundary break as the plates slip, forming a crack such as an undersea canyon or linear fault valley. The San Andreas Fault, between the Pacific and North American plates in California, is the module’s example.

How to use this module

  • Learners: Answer the pretest first on a separate sheet of paper. If you get all 15 items right, the module says you may skip it; if you score 14 or below, go through every part in order. Write all answers on separate paper and do not mark the module. Check your work with the answer key honestly, then take the posttest.
  • Parents: You do not need to be a science expert. Help your child gather the materials for the model (scissors, crayons or colored pencils, coupon bond, paste, ruler, and pen) and remind them to read each direction before starting.
  • Teachers: The Notes to the Teacher say the module gives brief but substantial concepts on plate boundaries, with enrichment activities and assessments, and that the teacher guides learners as they go. Use the rubric to score the What I Can Do model on four criteria: the three boundaries, plate movement and labels, Earth processes (subduction, mid-ocean ridge, volcanic arc), and neatness.

For the model, the module asks learners to color continental crust brown, oceanic crust blue, magma red-orange, mountains and volcanoes gray or dark brown, and trenches black, then label each boundary and its parts.

Frequently asked questions

What grade and quarter is this module for?

It is for Grade 10 Science, Quarter 1, Module 2. It follows Module 1 on plate tectonics.

What are the three types of plate boundaries?

Divergent boundaries, where plates move apart; convergent boundaries, where plates move toward each other; and transform fault boundaries, where plates slide past each other.

What are the three types of convergent boundaries?

Oceanic-continental, which forms a trench and a continental volcanic arc; oceanic-oceanic, which forms a trench and an island volcanic chain; and continental-continental, which forms mountain ranges like the Himalayas with no subduction.

Does the module have an answer key?

Yes. Answer keys for the pretest, activities, assessments, posttest, and the Find Me word search are at the back of the module. The model in What I Can Do is scored with a rubric.

What competency does the module cover?

It covers S10-Ia-j-36.2, describing the different types of plate boundaries, along with differentiating convergent boundaries and identifying plates on each boundary type.

Full text of the module

The text below is a transcription of the PDF above, as printed.

Science Quarter 1 – Module 2: Plate Boundaries

10

CO_Q1_Science10_Module2

Science – Grade 10 Alternative Delivery Mode Quarter 1 – Module 2: Plate Boundaries First Edition, 2020

Republic Act 8293, section 176 states that: No copyright shall subsist in any work of the Government of the Philippines. However, prior approval of the government agency or office wherein the work is created shall be necessary for exploitation of such work for profit. Such agency or office may, among other things, impose as a condition the payment of royalties.

Borrowed materials (i.e., songs, stories, poems, pictures, photos, brand names, trademarks, etc.) included in this module are owned by their respective copyright holders. Every effort has been exerted to locate and seek permission to use these materials from their respective copyright owners. The publisher and authors do not represent nor claim ownership over them.

Published by the Department of Education Secretary: Leonor Magtolis Briones Undersecretary: Diosdado M. San Antonio

Printed in the Philippines by ________________________

Development Team of the Module

Writer: Gloria C. Magalong Editors: Ma. Maila C. Justo, Jerry R. Junio Reviewers: Jaime Campos, Jr., Jerry R. Junio, Ma. Criselda G. Ocang, German J. Ferrer Jr., Ellen F. Fernandez, Gina A. Amoyen, Editha T. Giron Illustrator: Reynaldo C. Poquiz Layout Artists: Reyna H. Talinio Management Team: Tolentino G. Aquino, Arlene A. Niro, Gina A. Amoyen, Editha T. Giron, Carmina C. Gutierrez, Rustico P. Abalos, Jr, Marilou D. Roldan, Jerry R. Junio

Department of Education – Region I Office Address: Flores St., Catbangen, City of San Fernando, La Union Telefax: (072) 682-2324; (072) 607-8137 E-mail Address: region1@deped.gov.ph

10

Science Quarter 1 – Module 2: Plate Boundaries

Introductory Message

This Self-Learning Module (SLM) is prepared so that you, our dear learners, can continue your studies and learn while at home. Activities, questions, directions, exercises, and discussions are carefully stated for you to understand each lesson.

Each SLM is composed of different parts. Each part shall guide you step-by-step as you discover and understand the lesson prepared for you.

Pre-tests are provided to measure your prior knowledge on lessons in each SLM. This will tell you if you need to proceed on completing this module or if you need to ask your facilitator or your teacher’s assistance for better understanding of the lesson. At the end of each module, you need to answer the post-test to self-check your learning. Answer keys are provided for each activity and test. We trust that you will be honest in using these.

In addition to the material in the main text, Notes to the Teacher are also provided to our facilitators and parents for strategies and reminders on how they can best help you on your home-based learning.

Please use this module with care. Do not put unnecessary marks on any part of this SLM. Use a separate sheet of paper in answering the exercises and tests. And read the instructions carefully before performing each task.

If you have any questions in using this SLM or any difficulty in answering the tasks in this module, do not hesitate to consult your teacher or facilitator.

Thank you.

What I Need to Know

Plate tectonics is a theory that explains the surface of the earth is broken into large and small lithospheric plates that are moving constantly and slowly. The size and position of these plates change as years pass by. They move against each other at their edges causing intense geologic activity, such as earthquakes, volcanism, and mountain building.

In your previous lesson, you are done with the Plate tectonics and its relationship to the distribution of earthquake epicenters, active volcanoes, and major mountain belts.

This module will provide you with information and activities that will help you understand Plate Boundaries (Divergent, Convergent, and Transform fault).

After going through this module, you are expected to:

  1. describe the different types of plate boundaries (S10 -Ia -j-36.2);
  2. differentiate the types of convergent boundaries; and
  3. identify the places/plates that lie on the different types of boundaries.

Before going on, check how much you know about this topic. Answer the pretest on the next page in a separate sheet of paper.

What I Know

Directions: Read carefully each item. Use a separate sheet of paper for your answers. Write only the letter of the best answer for each question.

  1. Plates move apart at _________ boundaries.

    • A. convergent
    • B. stable
    • C. divergent
    • D. transform
  2. Plates slide past each other at _______________.

    • A. subduction zone


    • B. divergent boundary


    • C. convection current


    • D. transform fault boundary


  3. The boundary between two plates moving toward each other is called a _________.

    • A. divergent boundary
    • B. transform boundary
    • C. lithosphere
    • D. convergent boundary
  4. Seafloor spreading is located at _______________________.

    • A. transform plate boundary
    • B. convergent plate boundary
    • C. divergent plate boundary
    • D. Indian plate
  5. Plate Tectonic Theory states that continents have moved ________ to their current location.

    • A. vertically
    • B. horizontally
    • C. quickly
    • D. slowly
  6. The East African Rift is an example of a _____________.

    • A. mid-ocean ridge
    • B. convergent boundary
    • C. rift valley
    • D. transform boundary
  7. The Himalayan mountain range of India was formed at the __________.

    • A. divergent boundary
    • B. convergent boundary
    • C. hot spot
    • D. transform boundary
  8. Philippine plate moves toward __________.

    • A. Australian plate
    • B. Arabian plate
    • C. Antarctic plate
    • D. Eurasian plate
  9. The __________ is an example of a transform fault boundary.

    • A. Appalachian Mountains
    • B. Mid-Atlantic Ridge
    • C. San Andreas Fault
    • D. Himalayas
  10. This is the type of plate boundary that occurs between the African Plate and the Arabian Plate.

    • A. divergent boundary
    • B. transform boundary
    • C. convergent oceanic-continental plate boundary
    • D. convergent oceanic-oceanic plate boundary
  11. This is the type of plate boundary that occurs between the Nazca Plate and the South American Plate.

    • A. convergent oceanic-continental plate boundary
    • B. convergent oceanic-oceanic plate boundary
    • C. convergent continental-continental plate boundary
    • D. transform boundary
  12. Base on the current position of the continents, South America is moving away from Africa in what direction?

    • A. West
    • B. East
    • C. North
    • D. South
  13. At the convergent plate boundary, _______________.

    • A. new crust is created
    • B. the crust separates
    • C. the older crust is recycled by subduction
    • D. plates side past one another
  14. The force that causes the plates to move is____________________.

    • A. tectonic force
    • B. gravitational force
    • C. radiation
    • D. convection current
  15. Features found at divergent plate boundaries include ____________.

    • A. mid-ocean ridges
    • B. deep-sea trenches
    • C. crumpled mountains
    • D. island arc volcanoes

How did you find the pretest? What was your score? If you got 15 items correctly, you may skip the module. But if your score is 14 and below, you must proceed with the module.

Have fun learning!

Lesson 1 Plate Boundaries

[chart: map; Figure 1. Map of Plate Boundaries]

Labels printed on the map: North American Plate; Eurasian Plate (upper left); Juan de Fuca Plate; Caribbean Plate; Eurasian Plate (right); Philippine Plate; Cocos Plate; Arabian Plate; Pacific Plate; Nazca Plate; South American Plate; African Plate; Australian Plate; Antarctic Plate.

Figure 1. Map of Plate Boundaries

Figure 1 shows large and small lithospheric plates, including the Philippine Plate. These plates are moving very slowly but constantly. The movement of the plate is called Tectonic.

In Module 1, you have learned about Plate Tectonics. In this module, you will learn how this plate tectonics affects the formation of different types of plate boundaries.

What’s In

Directions: Below is an activity for you to recall what you have learned in module

Plate Tectonics Crossword Puzzle

[transcriber’s note: the crossword grid is an image and is not reproduced here; only the clues are transcribed]

Down:

  1. The break in a rock along which movement have occurred


  2. Earth crust that is thinner but denser


  3. Mt. Pinatubo


  4. Molten rocks


  5. The innermost layer of the earth


Across:

  1. The outermost rigid layer of the earth consists of the crust and upper mantle
  2. Borderline
  3. Movement of the lithospheric plate
  4. The vibration of the Earth due to the release of tremendous energy

[chart: crossword grid; numbered cells 1 to 10 with clue numbers 1, 2, 3, 4, 5, 6, 7, 8, 9, 10 printed in the grid]

[transcriber’s note: the crossword grid is not reproduced; only its clues and printed cell numbers are transcribed]

Notes to the Teacher

[illustration: hand holding papers inside a circle]

This module contains brief but substantial concepts of Plate Boundaries. Enrichment activities and assessments for the learners are provided.

The teacher will assist and guide the learners while going through this module.

What’s New

For you to understand the lesson well, do the following activities. Have fun and good luck!

Activity 1: Read Me! Understand Me!

Directions: Read the three plate boundaries description and characteristics. Understand what you are reading.

Plate boundaries are the lines at the edges of the different pieces of the lithosphere. Lithospheric plates are moving due to the convection current in the Earth’s interior. The lithosphere is made up of the crust and upper part of the mantle. There are two types of crusts: the continental crust which is thicker but less dense, and the oceanic crust, which is thinner and denser.

According to the Plate Tectonic Theory, the Earth’s lithosphere consists of the crust and upper mantle that move slowly and constantly over time. This movement causes the formation of plate boundaries namely: divergent, convergent, and transform fault boundaries.

(a) Divergent boundaries refer to plates that separate and move apart in opposite directions forming new lithosphere – the young seafloor. This either occurs at mid-ocean ridges (seafloor spreading) or at rifted continental margins (rift valley).

(b) Convergent boundaries are formed when two plates move toward each other. The oceanic plate bends downward at the subduction zone. This occurs in two oceanic plates: convergent boundary and continental plate-oceanic plate convergent boundary. Oceanic plate sinks because it is denser than the continental plate. In the case of convergence of two oceanic plates, the older plate sinks. Whereas in the convergence of two continental plates, they collide and buckle up forming mountain ranges. No subduction occurs in this type of convergence.

(c) Transform fault boundaries are plates sliding past or slipping past each other.

Directions: Choose your answer from the given choices. Write your answer on a separate sheet of paper.

Q1. What plate boundary is formed by the sliding of two plates? A. Divergent B. Convergent C. Transform-fault

Q2. What plate boundary is formed by the moving of two plates apart? A. Divergent B. Convergent C. Transform-fault

Q3. What plate boundary is formed by the collision of two plates? A. Divergent B. Convergent C. Transform-fault

Q4. What are the three types of convergent boundaries? A. Oceanic-Continental C. Oceanic-Oceanic B. Continental-Continental D. Lithosphere-Crust

For Q5. Using two arrows (→), draw the direction of the relative motion of the three plate boundaries below:

A. convergent boundary B. divergent boundary C. transform fault boundary

What is It

Divergent Boundary is formed when two tectonic plates move apart from each other creating tension. Molten rocks called magma to rise from the Earth’s mantle to the surface. The Earth’s surface is cool enough to solidify the magma that rose, thus, creating new oceanic crust or seafloor. A divergent boundary is also known as a constructive boundary. The mid-ocean ridge is formed by the divergence between oceanic plates while continental rift valley is formed between continental plates. Rift valley can also be found at the bottom of the ocean where seafloor spreading occurs. Both the formation of mid-ocean ridge and rift valley had the occurrence of an earthquake. Examples are boundaries between South American plate and African plate, Pacific Plate and Nazca Plate, and North American Plate and Eurasian Plate.

[illustration: divergent boundary cross-section with a magma column rising between two plates, labeled “Mid-Ocean Ridge”]

Figure 2. Divergent Boundary

Convergent boundary is formed when two plates move toward each other. This boundary has three types: Oceanic plate-Continental plate boundary, Two Oceanic plates boundary, and Two Continental plates boundary. In Oceanic-Continental plates boundary and two oceanic plates boundary, the oceanic plate bends downward into the mantle through the process called subduction. The leading edge of the subducted plate melts in the mantle and magma

[illustration: convergent boundary cross-section showing a trench, a subducting oceanic plate, a continental plate, and magma rising to a volcanic arc]

Figure 3. Convergent Boundary

rises forming a continental volcanic arc in oceanic-continental plate boundary, which is parallel to the trench that is formed due to subduction. While in two oceanic plates boundary, island volcanic chain is formed parallel to the trench. An earthquake occurs in both type of boundaries. Since the oceanic plate is destroyed at the convergent boundary, this boundary is also called a destructive boundary. Examples are boundaries between the Eurasian plate and the Philippine plate, Nazca Plate and South American Plate, and Pacific Plate and Australian Plate. With two continental plates converging, a compression zone is formed. Both plates collide and buckle up causing mountain ranges such as the Himalayas mountain ranges. There is no subduction, no trench, and no volcanoes formed in this type of convergent boundary.

Transform fault boundary is formed when two plates are sliding past each other. It is also called the Strike-slip fault. Rocks that line the boundary split into pieces as the plates slip at each other. A crack is then formed creating an undersea canyon or linear fault valley. San Andreas Fault is an example of this.

[illustration: two rock blocks sliding past each other along a fault, with opposing arrows]

Figure 4. Transform Fault Boundary

What’s More

Here are some enrichment activities for you to work on to master and strengthen the basic concepts you have learned from this lesson.

Enrichment Activity 1: Fill the Missing Piece!

What you need

ruler pencil/pen

What you have to do

  1. Get a ruler and pen and draw a table like the one on the next page (page 9) on a separate sheet of paper.
  2. Complete the table.
  3. Use arrows to represent the direction of the movement.
  4. Answer Assessment 1.
Assessment 1

Directions: Use a separate sheet of paper for your answers. Write the correct word/s from the choices inside the parenthesis to complete the sentence in each given item.

  1. The relative motion of the plates at the transform fault boundary is ________ (moving away, sliding past) each other.
  2. The relative motion of the plates at the divergent boundary is moving ___________ (away, toward) each other.
  3. The relative motion of the plates at the convergent boundary is moving ___________ (away, toward) each other.
  4. At the convergent boundary between oceanic plate and continental plate, ___________ (tension, subduction) zone is formed.
  5. ___________ (Mid-ocean ridge, Rift valley) is formed by divergence of two oceanic plates.
Table 1: Plate Boundaries
Direction of MovementMotionType of BoundaryExample
[illustration: two horizontal arrows, one pointing left and one pointing right]
Two plates come together, one sliding under the other, or both are rising up.
Transform fault Boundary

Table 1: Plate Boundaries

Enrichment Activity 2: Spot the Difference
  1. Study Figure 5, 6, and 7 showing the three types of convergent boundaries.
  2. Take note of the differences and similarities between the three figures and answer Assessment 2.
Types of Convergent Boundaries

[illustration: Figure 5 cross-section of an oceanic plate subducting beneath a continental plate, with a trench, a volcanic arc, and magma]

Figure 5: Oceanic-Continental Plate Convergent Boundary

[illustration: Figure 6 cross-section of two oceanic plates converging, with a trench and a volcanic island]

Figure 6: Two Oceanic Plates Convergent Boundary

[illustration: Figure 7 cross-section of two continental plates colliding, with folded mountain ranges and no trench]

Figure 7: Two Continental Plates Convergent Boundary

Assessment 2

Directions: Arrange the jumbled letters below to form the correct word/s. Use these words to complete the paragraph that follows. Write your answer on a separate sheet of paper.

A. ICOCEAN PLTEA – _____________________ B. CONNITNETAL PTALE – _____________________ C. OCIENAC – _____________________ D. UOSUBDCTIN – _____________________ E. ON – _____________________

Figure 5 shows two plates which are (1) _____ and (2) _____. The (3) _____ plate subducts. Figure 6 shows that one of the two oceanic plates bends toward the mantle at the (4) _____ zone. Figure 7 shows the two continental plates colliding. In this type of convergent boundary, there is (5) _____ subduction zone

Enrichment Activity 3: Find the Boundary on the Map!

The seven major plates are African plate, Antarctic plate, Eurasian plate, Australian plate, North American plate, Pacific plate, and South American plate. Plate boundaries are formed between these plates. Can you identify them?

What you need:

Map of the plate boundaries Pen / pencil

What you have to do

The figure below (Figure 8) shows the relative motion of the plates as indicated by the arrows. Study the direction of the arrows on the map. Identify the plates that lie on the divergent, convergent, and transform fault boundaries.

[chart: map; Figure 8. Map of the Plate Boundaries]

Plates and labels printed on the map: North American Plate; Eurasian Plate; Juan de Fuca Plate; Caribbean Plate; Philippine Plate; Cocos Plate; Arabian Plate; Pacific Plate; Nazca Plate; South American Plate; African Plate; Australian Plate; Antarctic Plate.

Legend:

  • Convergent Boundary
  • Divergent Boundary
  • Transform Fault Boundary

Figure 8. Map of the Plate Boundaries

Assessment 3

Directions: Use a separate sheet of paper for your answers. Write the correct word/s from the choices inside the parenthesis to complete the sentence in each given item.

  1. Pacific plate and Nazca plate formed _____________ (convergent, divergent) boundary.


  2. San Andreas Fault is a transform fault boundary found in __________ (South American plate, North American plate).


  3. Philippine plate moves toward _____________ (African plate, Eurasian plate) at the convergent boundary.


  4. _____________ (Convergent, Divergent) is the type of boundary between Australian plate and African plate.


  5. The type of boundary between Pacific plate and Antarctic plate is _____________ (convergent, divergent) boundary.


Great job! You have understood the lesson. Are you now ready to summarize?

What I Have Learned

Directions: Summarize what you have learned from the lesson and activities by completing the sentences using the words from the box. You can only use each word once. Use a separate sheet of paper for your answers.

[transcriber’s note: the word box is printed in rows, read row by row below]

continental theory geologic divergent lithosphere plates subduction convection current slowly denser toward two continental plates two oceanic plates oceanic plate-continental plate transform fault

(1) _____________ is made of earth’s crust and upper mantle. It is subdivided into portions called (2) _____ that move above the mantle. The two kinds of crust are (3) _____________ crust, which is thicker but less dense, and oceanic crust, which is thinner but (4) _____. A (5) _____ that the Earth’s crust is made up of plates moving (6) _____ and interact in various ways is Plate Tectonics. The interaction of the plates produces earthquakes, mountains, volcanoes, and other (7) _____________ features. (8) _____________________ from the Earth’s interior makes the plates move above the mantle. This movement causes the formation of three types of plate boundaries which are (9) _________________ boundary, two plates sliding each other; (10) _________ boundary, two plates moving away from each other and convergent boundary which plates are moving (11) _____ each other. Three types of convergent boundaries are (12) _______________ convergent boundary which forms volcanic island arc, (13) _____________________ convergent boundary forming a continental volcanic arc, and (14) _____________________ convergent boundary wherein there is no (15) _________.

What I Can Do

At this point, make a plate tectonic model showing the plate boundaries and plate movements. Cutouts of plate boundaries are provided on the next page. The scoring rubric will be used in assessing your outputs.

What you need

Plate Boundaries cutouts

Pair of scissors

pencil/pen

crayon/color pencils

coupon bond/sheet of paper

paste

What you have to do
  1. Cut the drawings on the next page and form models of plate boundaries.
  2. Paste-on a piece of a coupon bond or sheet of paper.
  3. Put arrows to show the motion of the plates.
  4. Color the models. Brown for continental crust, blue for oceanic crust, red orange for magma, gray or dark brown for mountains and volcanoes and black for trench.
  5. Label the models such as Convergent Boundary, Divergent Boundary, Transform Fault Boundary.
  6. Label each model with Volcanic arc, Trench, Island volcanic chain, Oceanic plate, Continental plate, and Magma.

Copy for the learner: Copy this page in a separate paper and use it as your answer sheet. For the first user of this module, use the spare copy found at the back.

Plate Boundaries Cut outs

[illustration: six cutout drawings of block diagrams showing plate boundaries, including one with volcanoes and an arc, one with a trench and a bent slab, and four with a fault line or boundary between plates]

Rubrics for Scoring the Output

IllustrationsPoor 1 pointFair 3 pointsGood 5 points
Plate Boundaries include an illustration of convergent, divergent, and transform fault boundary.Plate boundaries are not properly labeled or not included.One of the plate boundaries is missing.The 3 different types of plate boundaries are properly labeled.
Plate movement must include illustrations of the direction of the plate movement, and labeling the different types of plates (oceanic and continental)The direction of the plate movements is incorrectly labeled. The oceanic and continental plates are missing.A few arrow directions are missing. Oceanic and continental plates are not properly labeled.The output includes 6 arrows properly showing the direction of the movement of the plate boundaries. Oceanic and continental plates are properly labeled throughout the model.
Earth processes include an illustration of subduction, Mid-ocean ridge, and volcanic arc.Two or more of the processes are missing; two or more are not properly labeled.One of the processes is missing; one is not properly labeled.The output includes subduction, Mid-ocean ridge, and volcanic arc are properly labeled and depicted.
Quality of model, neatness, color, and legible handwriting is evident.The quality of model is sloppy, and labels are not legible.The quality of the model is fair.The model is neat and colorful. All labels are easy to read.

Assessment

Directions: Read carefully each item. Use a separate sheet for your answers. Write only the letter of the best answer for each test item.

  1. Convection current causes the lithospheric plate to ________________.
    a. move slowly but constantly
    b. move in any direction
    c. move faster
    d. create another plate


  2. The youngest part of the ocean floor is found at the ___________.
    a. convergent boundary c. transform-fault
    b. divergent boundary d. hot spot


  3. What type of plate boundary occurs between the Nazca Plate and the South American Plate?
    a. convergent oceanic-continental plate boundary
    b. convergent oceanic-oceanic plate boundary
    c. convergent continental-continental plate boundary
    d. transform boundary


  4. The crust and upper mantle make up the Earth’s ____________.
    a. lithosphere c. core
    b. asthenosphere d. continents


  5. The result of plate movement can be seen at _________.
    a. abyssal plains c. plate centers
    b. plate boundaries d. ocean margin


  6. The theory that suggests that plates are slowly moving is called ___________.
    a. Magnetic Reversal c. Continental Slope
    b. Plate Tectonic d. Continental Drift


  7. Plates move apart at __________ boundaries.
    a. convergent c. divergent
    b. stable d. transform plate


Very well done! You are now ready to take your posttest. You may again go over the lessons, activities, and maps to review for the final assessment. Good luck!

  1. Plates slipping past each other at ________________.
    a. subduction zone
    b. convection current
    c. divergent boundary
    d. transform boundary


  2. The boundary between two plates moving together is called a __________.
    a. divergent boundary
    b. transform boundary
    c. lithosphere
    d. convergent boundary


  3. Based on the current position of the continents, South America is moving away from Africa in what direction?
    a. West c. North
    b. East d. South


  4. At the convergent plate boundary, _______________.
    a. new crust is created
    b. the older crust is melted by subduction
    c. the crust separates
    d. plates side past one another


  5. The East African Rift is an example of a _____________.
    a. mid-ocean ridge
    b. convergent boundary
    c. divergent boundary
    d. transform boundary


  6. The Himalayan mountain range of India was formed at the __________.
    a. divergent boundary
    b. convergent boundary
    c. hot spot
    d. transform boundary


  7. Philippine plate moves toward ___________.
    a. Australian plate
    b. Mountain ranges
    c. Trenches
    d. Eurasian plate


  8. The __________ is an example of a transform fault boundary.
    a. East Pacific Rise
    b. San Andreas Fault
    c. Mid-Atlantic Ridge
    d. Himalayas


Great job! You are almost done with this module.

Additional Activity

“Find Me”

Directions: Answer the given questions below on a separate sheet of paper. Then find your answers in the Word Search on the next page. (A copy of the Word Search is provided for the learner.)

  1. Philippine islands were originated from ______________boundary.
  2. What type of plate boundary occurs between the Eurasian plate and the North American plate?
  3. Movement of the plate boundary causes shaking of the Earth’s surface called ___________________.
  4. It consists Earth’s crust and upper mantle.
  5. What geologic feature is formed between the diverging oceanic plates?
  6. It is a transform fault boundary between the Pacific plate and North American plate which extends through California.
  7. It is the process wherein the leading edge of one plate bends downward into the mantle beneath the other plate.
  8. What type of plate boundary is formed between two plates sliding past each other?
  9. Other terms for molten rocks.
  10. Convergent boundary is formed between Caribbean plate and ______plate.

Learner’s Copy: Copy the “Plate Boundaries Word Search” in a separate paper and use it as your answer sheet. For the first user of this module, use the spare copy found at the back.

Plate Boundaries Word Search
T M I D O C E A N R I D G E B X S
F N Z A C S N J C U J H U G V T A
T C E G P W L E M R U S T O H I N
R M S G E L J E A T J J G K O T A
A K E A R A A E G R J Q H E T N N
N N I P E E R T M S E T O U S F D
S O R I F T V A A L E Y P H P I R
F I M V E D G N H T I P S O O P E
O T O E V R J N O L E R P O T H A
R O I T C E V N O C A C A A C L S
M E O E O Z B P Q P H Y T A C M F
F V G W C D I V E R G E N T E K A
A N I S O Q J A M B F I C R N C U
U O S K S E K A U Q H T R A E I L
L I T H O S P H E R E J V R O G T
T N K G R I V N O I T C U D B U S

Great job! You are now aware of the different types of plate boundaries.

Are you ready to demonstrate precautionary measures when geologic disasters happen?

Answer Key

What I Know

transcriber’s note: this page is printed upside down; the items below were read after rotating the page.

  1. C
  2. D
  3. D
  4. C
  5. D
  6. C
  7. B
  8. C
  9. C
  10. A
  11. A [?]
  12. A [?]
  13. C
  14. D
  15. A
What’s New

transcriber’s note: this page is printed upside down; the items below were read after rotating the page.

  1. Transform
  2. Divergent
  3. Convergent
  4. (In any order)
    Oceanic-Continental
    Oceanic-Oceanic
    Continental-Continental
  5. A.
    [illustration: arrow diagram A with opposing arrows showing plate motion]
    B.
    [illustration: arrow diagram B with arrows showing plate motion]
    C.
    [illustration: arrow diagram C with arrows showing plate motion]
    or
    [illustration: arrow diagram showing plate motion]
What Do I Know?

[chart: crossword puzzle; “What Do I Know?”]

transcriber’s note: this crossword is printed upside down, and its clue list is not printed on this page. The letters in the grid are not transcribed.

What’s More

Enrichment Activity 1

Table 1. Plate Boundary Characteristics

Direction of MotionMotionType of Plate BoundaryExample
[illustration: two arrows pointing away from each other]2 Plates moving apart from each otherDivergentAfrican plate and South American plate or answer may vary based on the map.
[illustration: two arrows pointing toward each other]2 plates come together, one sliding under the other or both are rising up.ConvergentEurasian plate and Philippine plate or answer may vary based on the map.
[illustration: two vertical arrows pointing in opposite directions]2 plates slide past each other.Transform FaultSan Andreas Fault
Assessment 1
  1. slide past
  2. away
  3. toward
  4. subduction
  5. Mid-Ocean Ridge

What’s More

Enrichment Activity 2

A. OCEANIC PLATE B. CONTINENTAL PLATE C. OCEANIC D. SUBDUCTION E. NO

  1. Oceanic Plate
  2. Continental Plate
  3. Oceanic
  4. Subduction
  5. No
Assessment 2
Enrichment Activity 3
  1. Divergent
  2. North American Plate
  3. Eurasian Plate
  4. Divergent
  5. Divergent
Assessment 3

[chart: diagrams of three plate boundaries; labels as printed]

Convergent Boundary: Magma; Continental plate; Oceanic plate; Trench; Continental Volcanic Arc; Ocean

Divergent Boundary: Magma; Oceanic Plate; Oceanic Plate; Mid-ocean Ridge; Ocean

Transform-Fault Boundary: Continental plate; Continental plate

What I Can Do

Points will be based on Rubrics

Assessment

  1. A
  2. B
  3. A
  4. A
  5. B
  6. B
  7. C
  8. D
  9. D
  10. A
  11. B
  12. C
  13. B
  14. D
  15. C

What’s More

Plate Boundaries Word Search

[illustration: word search grid with the answers marked by boxes and a diagonal line; the letters are the same as the Learner’s Copy on page 30]

transcriber’s note: the answer-key grid repeats the Learner’s Copy grid, so its letters are not transcribed again here.

“Find Me”
  1. Divergent
  2. Convergent
  3. Earthquake
  4. Lithosphere
  5. Mid-ocean ridge
  6. San Andreas Fault
  7. Subduction
  8. Transform Fault
  9. magma
  10. Cocos

References

Printed Materials:

Department of Education, Bureau of Secondary Education. Module 12: Inside the Solid Earth (2014):17-21, Project EASE Integrated Science1, Pasig City, Philippines

Department of Education, “Unit 1: Earth and Space”, Science 10 Learner’s Material (2015): 14-30. Pasig City, Philippines

Department of Education, “Unit 1: Earth and Space”, Science 10 Teacher’s Guide (2015):12-19. Pasig City, Philippines

Department of Education, “K-12 Basic Education Curriculum”, Science 10 Teacher’s Guide !2015). Pasig City, Philippines

Website:

National Geographic Society. “Rift Valley.” National Geographic Society, October 9, 2012. Accessed November 27, 2019. https://www.nationalgeographic.org/encyclopedia/rift-valley/.

“What Are the Different Types of Plate Tectonic Boundaries?” What are the different types of plate tectonic boundaries?: Exploration Facts: NOAA Office of Ocean Exploration and Research. Accessed November 27, 2019. https://oceanexplorer.noaa.gov/facts/plate-boundaries.html.

Copy for the learner

Plate Boundaries Cut outs

[illustration: six outline cut-out diagrams of plate boundaries, showing two plate blocks with boundary lines, a subduction boundary with a trench and volcano, a mid-ocean ridge, and a transform boundary]

Learner’s Copy

Plate Boundaries Word Search
T M I D O C E A N R I D G E B X S
F N Z A C S N J C U J H U G V T A
T C E G P W L E M R U S T O H I N
R M S G E L J E A T J J G K O T A
A K E A R A A E G R J Q H E T N N
N N I P E E R T M S E T O U S F D
S O R I F T V A A L E Y P H P I R
F I M V E D G N H T I P S O O P E
O T O E V R J N O L E R P O T H A
R O I T C E V N O C A C A A C L S
M E O E O Z B P Q P H Y T A C M F
F V G W C D I V E R G E N T E K A
A N I S O Q J A M B F I C R N C U
U O S K S E K A U Q H T R A E I L
L I T H O S P H E R E J V R O G T
T N K G R I V N O I T C U D B U S

For inquiries or feedback, please write or call:

Department of Education – Bureau of Learning Resources (DepEd-BLR)

Ground Floor, Bonifacio Bldg., DepEd Complex Meralco Avenue, Pasig City, Philippines 1600

Telefax: (632) 8634-1072; 8634-1054; 8631-4985

Email Address: blr.lrqad@deped.gov.ph * blr.lrpd@deped.gov.ph

Leave a Reply

Your email address will not be published. Required fields are marked *

For students and teachers

Looking for a school?

Look up the enrollment, teachers, classrooms and facilities of more than 60,000 schools across the Philippines, from DepEd’s public data. Free to use.

Philippine Schools Directory by TeacherPH · every region, province, division and district