This is the Grade 9 Science Quarter 4 Module 6 self-learning module, Law of Conservation of Mechanical Energy. It is an Alternative Delivery Mode (ADM) module, First Edition 2020, from DepEd Iligan City, written for learners studying at home or in class. After working through it, learners should be able to explain what total mechanical energy is and show that it stays the same as energy changes between potential and kinetic forms.
On this page 7 sections
What learners will learn
The module focuses on one learning competency:
- Infer that the total mechanical energy during any process remains the same (S9FE-IVe41)
By the end of the module, learners are expected to:
- Define total mechanical energy.
- Derive a conclusion that the total mechanical energy in a given system is the same.
Lessons in this module
- Lesson 1: Total Mechanical Energy. Learners review potential and kinetic energy, learn their formulas, and add them to find the total mechanical energy of an object.
- Lesson 2: Conservation of Mechanical Energy. Using a swinging pendulum and a cart on a frictionless ramp, learners see that when potential energy goes down, kinetic energy goes up by the same amount, so the total never changes.
Key ideas: potential, kinetic, and total mechanical energy
Potential energy (PE) is energy stored in an object because of its position or height. The module’s example is a girl holding a ball on a raised platform: the ball has potential energy because it is above the ground.
- Formula: PE = mgh, where m is mass in kilograms, g is the acceleration due to gravity (9.8 m/s² at Earth’s surface), and h is height in meters.
Kinetic energy (KE) is the energy of motion. When the girl drops the ball, its potential energy turns into kinetic energy as it falls. When it reaches the ground, all of the potential energy has become kinetic energy.
- Formula: KE = ½mv², where m is mass and v is velocity.
Total mechanical energy (MEт) is the sum of the two:
- MEт = PE + KE
Energy is measured in joules (J), or kg·m²/s². The module also mentions the calorie (cal), which equals 4.184 J.
For example, an object with 200 J of potential energy and 100 J of kinetic energy has a total mechanical energy of 300 J.
Key ideas: why mechanical energy is conserved
The module states that for any mechanical process inside an isolated system with only conservative forces acting, total mechanical energy stays constant over time. (A conservative force is one where the work done moving an object between two points does not depend on the path taken.) In symbols:
- ΔMEт = ΔKE + ΔPE = 0
- PE₁ + KE₁ = PE_f + KE_f
The pendulum example
The module follows a pendulum swinging from point A to point E, with only gravity acting on it:
| Point | PE | KE | Total |
|---|---|---|---|
| A (highest) | 10,000 J | 0 | 10,000 J |
| B | 5,000 J | 5,000 J | 10,000 J |
| C (lowest) | 0 | 10,000 J | 10,000 J |
| D | 5,000 J | 5,000 J | 10,000 J |
| E (highest) | 10,000 J | 0 | 10,000 J |
At the top, potential energy is at its maximum. As the pendulum swings down, potential energy becomes kinetic energy. At the bottom, kinetic energy is at its maximum. Swinging back up, the change reverses. Any loss of potential energy is a gain in kinetic energy, so the total at every point is the same.
Other examples in the module
- A roller coaster car going down the track gains speed as PE turns into KE; going up, it slows as KE turns back into PE.
- In Activity 2 (“Let Me Take a Ride!”), Juan rides a cart up a frictionless ramp. At point A it has 0 J of PE and 15 J of KE; at point B, 7 J of PE and 8 J of KE; at point C, 15 J of PE and 0 J of KE. The total stays at 15 J throughout.
How to use this module
The module follows the usual self-learning module parts:
- What I Know: a 10-item pretest to check what you already know.
- What’s In and What’s New: review activities such as identifying PE and KE in everyday scenes (a mango on a tree, a stretched rubber band, a yoyo, a roller coaster) and filling in missing values using ME = PE + KE.
- What is It: the main discussion of each lesson.
- What’s More and What I Have Learned: practice tables, the pendulum activity “Mood Swing,” modified true-or-false items, and the “Fixing Point” table.
- What I Can Do: a performance task called “I Think, Therefore I Am… An Engineer!” Learners build a DIY miniature swing from popsicle sticks or chopsticks, string, and glue, draw a blueprint marking the highest and lowest PE and KE, and explain that total mechanical energy stays the same.
- Summary and Assessment: a recap of the law and a 10-item post-test.
For learners: Write your answers on a separate sheet or in your science notebook, not on the module. Check your work with the answer key at the end, and use it honestly.
For parents: Help your child follow the parts in order and gather simple materials for the miniature swing.
For teachers: The answer key covers the pretest, the lesson activities, and the assessment. Scoring for the performance task refers to a rubric in Appendix A.2.
Frequently asked questions
What grade and quarter is this module for?
It is for Grade 9 Science, Quarter 4. It is Module 6, titled Law of Conservation of Mechanical Energy.
What is total mechanical energy?
Total mechanical energy is the sum of an object’s potential energy and kinetic energy, written as MEт = PE + KE. It is measured in joules.
What does the law of conservation of mechanical energy say?
The total mechanical energy of an isolated system stays the same when only conservative forces act. Any decrease in potential energy equals the increase in kinetic energy, and vice versa.
Does the module have an answer key?
Yes. The answer key at the end covers the pretest, the activities in both lessons, and the final assessment.
What is the performance task in this module?
Learners design and build a DIY miniature swing from materials like popsicle sticks, string, and glue. They draw a blueprint showing where potential and kinetic energy are highest and lowest, then explain that total mechanical energy stays the same.
Full text of the module
The text below is a transcription of the PDF above, as printed.
Science Quarter 4 – Module 6: Law of Conservation of Mechanical Energy
Science Quarter 4 – Module 6: Law of Conservation of Mechanical Energy
[illustration: students reading and studying outdoors and at a desk, with a globe and a lamp]
CO_Q4_Science 9_ Module 6
Science – Grade 9 Alternative Delivery Mode Quarter 4 – Module 6: Law of Conservation of Mechanical Energy First Edition, 2020
Republic Act 8293, section 176 states that: No copyright shall subsist in any work of the Government of the Philippines. However, prior approval of the government agency or office wherein the work is created shall be necessary for exploitation of such work for profit. Such agency or office may, among other things, impose as a condition the payment of royalties.
Borrowed materials (i.e., songs, stories, poems, pictures, photos, brand names, trademarks, etc.) included in this module are owned by their respective copyright holders. Every effort has been exerted to locate and seek permission to use these materials from their respective copyright owners. The publisher and authors do not represent nor claim ownership over them.
Published by the Department of Education Secretary: Leonor Magtolis Briones Undersecretary: Diosdado M. San Antonio
Development Team of the Module
Writers: Jaylen S. Navato; Cherry Lou B. Sabinay
Editor: Marigold B. Paguta
Reviewers: Richard Talaid, Jeremy Sacon, Maria Janice Corpuz, Nancy Pelare, Fe G. Nijaga
Language: Maxel Maglasang
Illustrator: Jaylen S. Navato
Layout Artists: Cherry Lou B. Sabinay, Jacqueline E. Libut
Management Team: Roy Angelo E. Gazo, PhD, CESO V; Shambaeh A. Abantas, PhD, CESE; Henry B. Abueva; Ann Q. Solijon; Rustico Y. Jerusalem; Meriam S. Otarra; Charlotte D. Quidlat
Printed in the Philippines
Department of Education – Iligan City
Office Address: General Aguinaldo, St., Iligan City Telefax: (063)221-6069 E-mail Address: iligancity@deped.gov.ph
9
Science
Quarter 4 – Module 6: Law of Conservation of Mechanical Energy
Introductory Message
This Self-Learning Module (SLM) is prepared so that you, our dear learners, can continue your studies and learn while at home. Activities, questions, directions, exercises, and discussions are carefully stated for you to understand each lesson.
Each SLM is composed of different parts. Each part shall guide you step-by-step as you discover and understand the lesson prepared for you.
Pre-tests are provided to measure your prior knowledge on lessons in each SLM. This will tell you if you need to proceed on completing this module or if you need to ask your facilitator or your teacher’s assistance for better understanding of the lesson. At the end of each module, you need to answer the post-test to self-check your learning. Answer keys are provided for each activity and test. We trust that you will be honest in using these.
In addition to the material in the main text, Notes to the Teacher are also provided to our facilitators and parents for strategies and reminders on how they can best help you on your home-based learning.
Please use this module with care. Do not put unnecessary marks on any part of this SLM. Use a separate sheet of paper in answering the exercises and tests. And read the instructions carefully before performing each task.
If you have any questions in using this SLM or any difficulty in answering the tasks in this module, do not hesitate to consult your teacher or facilitator.
Thank you.
What I Need to Know
[illustration: hand with index finger pointing at a button, in a circle]
This module was designed and written with you in mind. It is here to help you master the different constellations that we observe at the different times of the year. The scope of this module permits it to be used in many different learning situations. The language used recognizes the diverse vocabulary level of students. The lessons are arranged to follow the standard sequence of the course. But the order in which you read them can be changed to correspond with the textbook you are now using.
The module focuses on achieving this learning competency:
Infer that the total mechanical energy during any process remains the same. S9FE-IVe41
After going through this module, you are expected to:
- Define the total mechanical energy; and
- Derive a conclusion that the total mechanical energy in a given system is the same.
What I Know
[illustration: hand holding a pencil, in a circle]
Directions: Choose the letter of the best answer. Write your answer separately on your Science Interactive Notebook.
Which of the following is used to express the unit of energy?
A. watt
B. joule
C. coulomb
D. kilowatt hourWhat form of energy is associated with motion?
A. Chemical Energy
B. Potential Energy
C. Sound Energy
D. Kinetic EnergyWhat law states that the total Energy in an isolated system remains the same?
A. Law of Conservation of Momentum
B. Law of Definite composition
C. Law of Conservation of Energy
D. Law of conservation of MassWhich of the following equations represents the Law of Conservation of Mechanical Energy.
A. PE1+ KE1 = PE2 + KE2 = PE3 +KE3
B. PE1+ KE2 = PE2 + KE3 = PE3 +KE1
C. PE2+ KE1 = PE3 + KE2 = PE1 +KE3
D. PE3+ KE1 = PE1 + KE3 = PE2 +KE2Which event does NOT describe potential energy being changed into kinetic energy?
A. A cart rolling down a hill.
B. A rubber foam being compressed
C. A student lets go a stretched slinky.
D. A twig falling from a branchThe potential energy of an 8-kg object on top of a hill is 256 J. What is its velocity in m/s just before it hits the ground?
A. 36
B. 18
C. 8
D. 3A stone rolls down some distance and gains 50 J of kinetic energy. Neglecting air resistance, how much gravitational potential energy did the stone lose?
A. more than 50 J
B. exactly 50 J
C. less than 50 J
D. cannot be determined from the information
Use the following diagram below to answer question 8. Neglect the effect of resistance forces.
[illustration: a ball resting on a flat track at point 1, rolling down into a dip at point 2, then up a slope through point 3 and point 4 to a flat section at point 5]
Figure A: The ball moves from point 1 to point 5 Illustrator: Jaylen S. Navato
What happens to the sum of its gravitational potential and kinetic energies, as the ball moves from point 1 to point 4 across the surface?
A. It decreases
B. It decreases and then increases
C. It increases and then decreases
D. It remains the same
For numbers 9-10, A pendulum is hanging from a point and its total mechanical energy is constant. Refer to the figure below.
[illustration: pendulum hanging from a fixed point, with its bob shown at five positions labeled a, b, c, d, and e]
Figure B: Pendulum Motion Illustrator: Jaylen S. Navato
At which point in the pendulum’s motion where the kinetic energy is at its maximum
A. e
B. c
C. d
D. bAt which point of the pendulum’s motion is the value of the change in the potential energy equal to the change in the kinetic energy?
A. b B. e C. a D. c
Lesson 1 Total Mechanical Energy
At the end of the lesson, you will be able to:
- Define total mechanical energy.
What’s In
[illustration: hands assembling a puzzle piece, in a circle]
In the previous module you have performed activities to demonstrate conservation of mechanical energy. Let us check what you have learned from the terminologies in the previous modules. Fill in the empty boxes to complete the word.
[illustration: crossword puzzle grid with empty boxes and some letters printed in place; printed letters include p, m, e, k, e, c, e, n, y, c, t, a, l, a, m, s, v, c, y, p, s, n]
transcriber’s note: the crossword’s clue entries are not printed on the page, and the grid’s letter positions are not fully recoverable in plain text, so the printed letters are listed in the order they appear in the grid rather than as a complete puzzle.
CO_Q4_Science 9_ Module 6
Lesson 2: Conservation of Mechanical Energy
At the end of the lesson, you will be able to:
- Derive a conclusion that the total mechanical energy in a given system is the same.
What’s In
Check the box PE if the scenario possesses Potential Energy. And check box KE if it has Kinetic Energy.
| Scenario | PE | KE |
|---|---|---|
| 1. Moving car | ||
| 2. Rock on the cliff | ||
| 3. Book on the table | ||
| 4. Rolling ball | ||
| 5. A boy playing on a slide |
Complete the missing values in the table given ME=PE+KE.
| PE (J) | KE (J) | ME(J) |
|---|---|---|
| 50 | 120 | |
| 40 | 70 | |
| 30 | 80 | |
| 25 | 50 | |
| 20 | 45 |
What’s New
Directions: Identify if it has Kinetic Energy or Potential Energy.
- a. The mango in the tree has _____ energy.
b. The mango falling in the tree has _____ energy. - a. unscratched rubber bands have _____ energy.
b. Stretched rubber band has_____ energy. - a. When you hold a yoyo in your hand, it has _____ energy.
b. Once the yoyo is released, it has _____ energy. - a. When the roller coaster is at the top, it has _____ energy.
b. When the roller coaster moves downward, it gains _____ energy.
What is It
Potential energy is the stored energy by an object due to position. For example, figure 1 shows a woman holding a ball. The ball stored potential energy due to its position or height from the ground.
[illustration: girl holding a ball on a raised platform]
Figure 1. Girl holding a ball
Illustrator: Cherry Lou Sabinay
The formula for potential energy depends on the force acting on the two objects given by P.E. = mgh, where m is the mass in kilograms, g is the acceleration due to gravity (9.8 m / s2 at the surface of the earth) and h is the height in meters
Kinetic energy is energy due to change in position. It is also termed as energy of movement or energy in motion.
The energy associated to the change in the position of the ball as it is dropped is called kinetic energy.
[illustration: girl standing on a platform releasing a ball, with an arrow showing the ball’s path downward]
Figure 2. Girl released the ball.
Illustrator: Cherry Lou Sabinay
Kinetic energy can be defined mathematically as KE=1/2mv² where, m = mass, and v = velocity.
When the ball is at the top it has potential energy, however as it starts to fall, the potential energy is being converted to kinetic energy. When the ball reaches the ground, there is no more potential energy since all of its initial potential energy has been converted to kinetic energy.
Potential and Kinetic energy are forms of Mechanical Energy. And, the sum of Potential and Kinetic energy is called Total Mechanical energy.
The unit for energy is joule or kg*m²/s² and mathematically it is defined as
MET = PE + KE
Where MET = Total Mechanical Energy PE = Potential Energy; and KE = Kinetic Energy
❖ For any mechanical process that occurs inside an isolated system and involves only conservative forces, the total mechanical energy is conserved. This means that the total mechanical energy remains constant in time.
(A conservative force is a force with the property that the total work done in moving a particle between two points is independent of the path taken.)
ΔMET = Δ KE + Δ PE = 0, Δ = change (Greek letter delta),
Δ KE = change of Kinetic Energy; and
Δ PE = change of Potential Energy
Another common unit of energy that is often used is the calorie (cal), which is equivalent to 4.184 J.
What’s More
Since the Total mechanical energy is the sum of the Potential and kinetic energy, complete the table by finding the Total mechanical energy.
| No. | PE (J) | KE (J) | MET = PE + KE (J) |
|---|---|---|---|
| 1 | 200 | 100 | _____ |
| 2 | 400 | _____ | 500 |
| 3 | 25 | 20 | _____ |
| 4 | 0 | 75 | _____ |
| 5 | 40.5 | 59.5 | _____ |
| 6 | _____ | 36.75 | 100 |
| 7 | 75 | _____ | 100 |
| 8 | 50 | 50 | _____ |
| 9 | 375 | _____ | 375 |
What I Have Learned
Direction: Modified True or False: Write True if the statement is correct. If the statement is False, change the underlined word or group of words to make the whole statement true.
_____ 1. Objects that have kinetic energy are not moving.
_____ 2. Potential energy is dependent upon the height or position of the object.
_____ 3. The product of potential energy and kinetic energy is called total mechanical energy.
_____ 4. The energy due to the change of height or position of the object is Kinetic energy.
_____ 5. The formula for Total Mechanical Energy is MET = PE + KE.
_____ 6. The SI unit of energy is joule.
_____ 7. Potential energy depends on the height or distance and mass of the object.
_____ 8. When you hit the hammer on the table, the stored potential energy in the hammer is converted to kinetic energy as the hammer moves down.
_____ 9. The difference between mechanical and kinetic is their ability to transform into each other.
_____10. When the book hits the floor, this energy of motion will again convert to kinetic energy.
Lesson 2: Conservation of Mechanical Energy
At the end of the lesson, you will be able to:
- Derive a conclusion that the total mechanical energy in a given system is the same.
What’s In
Check the box PE if the scenario possesses Potential Energy. And check box KE if it has Kinetic Energy.
| Scenario | PE | KE |
|---|---|---|
| 1. Moving car | ||
| 2. Rock on the cliff | ||
| 3. Book on the table | ||
| 4. Rolling ball | ||
| 5. A boy playing on a slide |
Complete the missing values in the table given ME=PE+KE.
| PE (J) | KE (J) | ME(J) |
|---|---|---|
| 50 | 120 | |
| 40 | 70 | |
| 30 | 80 | |
| 25 | 50 | |
| 20 | 45 |
Note: this page repeats the “What’s In” content of the previous page; it is transcribed as printed.
What’s New
Activity 1: Mood Swing
[illustration: pendulum hanging from a fixed point, shown in five positions labeled A to E]
Figure 3. A pendulum swinging
Illustrator: Jaylen S. Navato
Look at the Figure above and give your best guess on the questions that follow: Write your answer in a separate sheet
At what point/s is the potential energy at its maximum?
a. A
b. B
c. C
d. DThe kinetic energy is maximum at point/s _______.
a. A
b. B
c. C
d. DAt what point/s is the kinetic energy zero?
a. A
b. B
c. C
d. DAt what point/s is the potential energy zero?
a. A
b. B
c. C
d. DAt what point/s do/es the values of kinetic and potential energies equal?
a. A
b. B
c. C
d. D
What is It
The figure below shows a pendulum that is hanging from a point and swings from A to E in which only the gravitational force is acting on it.
[chart: diagram; Figure 4. A pendulum swinging]
Values printed on the diagram:
| Point | PE | KE |
|---|---|---|
| A | PE = 10,000 J | KE = 0 |
| B | PE = 5,000 J | KE = 5,000 J |
| C | PE = 0 | KE = 10,000 J |
| D | PE = 5,000 J | KE = 5,000 J |
| E | PE = 10, 000 J | KE = 0 |
Figure 4. A pendulum swinging
Illustrator: Jaylen S. Navato
At A the Potential Energy is at its maximum due to its height or position. As the pendulum starts to move, the Potential Energy decreases while Kinetic energy increases because of the change in position.
At B, half of the potential energy is lost and becomes kinetic energy. Hence, Potential energy is equal to kinetic energy (PE=KE)
At C, the height of the pendulum is at the minimum, thus potential energy is also at its minimum, while kinetic energy is at its maximum.
From C to E, the reverse will happen. It shall start with maximum kinetic energy at C. The kinetic energy will slowly transform to potential energy. Eventually, potential energy is at maximum while kinetic energy is at minimum at E.
At D, kinetic energy is equal to potential energy (KE=PE) which is also true at B.
Any loss of potential energy will result to a gain in kinetic energy and vice versa. There is no loss of energy in the system and energy is conserved. Therefore, the total mechanical energy at any point in the pendulum is constant.
What’s More
Activity 2: Let Me Take a Ride!
Juan is riding a cart moving up on a frictionless ramp from points A to C. What happens to the Kinetic, Potential and Total Mechanical energy in every point?
[chart: diagram; Figure 5. Let me take a ride.]
Labels printed on the diagram:
- A: PE=0J, KE=, ME=15J
- B: PE=7J, KE=, ME=
- C: PE=15J, KE=, ME=
Figure 5. Let me take a ride.
Illustrator: Jaylen Navato
Given the figure above, complete the data in the table.
| Point | PE (J) | KE (J) | ME (J) |
|---|---|---|---|
| A | 0 | 15 | |
| B | 7 | ||
| C | 15 |
Guide Questions:
- At which point/s is potential energy maximum?
- What happens to the total mechanical energy as the cart moves from A to C?
- What happens to the potential energy and kinetic energy as the cart moves from A to C?
What I Have Learned
A. THINK TANK! Write True if the statement is correct, but if it’s False, change the underlined word or group of words to make the whole statement true. Write your answers on your science notebook.
_______ 1. Mechanical energy consists of two types, the potential energy and kinetic energy.
_______ 2. Potential energy is energy due to its high velocity.
_______ 3. Kinetic energy is also termed as stored energy.
_______ 4. Given that PE is 50 J and KE is 10 J, then the total ME is 40 J.
_______ 5. ME is the product of PE and KE.
_______ 6. The object’s kinetic energy is transformed into potential energy or vice versa.
_______ 7. When Potential Energy of a pendulum decreases as it swings down, Kinetic Energy increases as it gains speed.
_______ 8. At a point, Potential Energy is zero while Kinetic Energy is at its maximum.
_______ 9. When the vehicle is moving, there is a gain of potential energy.
_______ 10. When the vehicle is at rest, it has kinetic energy.
B. FIXING POINT! Based from the illustration, complete the table below.
[illustration: roller-coaster style track with a ball at the top left, a ball at the lowest point, a ball at a higher hump, and a ball at the bottom right; a person pushes the ball at the start]
Figure. Fixing Point. Illustrator: Jaylen Navato
| POINT | PE (J) | KE (J) | MET = PE + KE (J) |
|---|---|---|---|
| A | 50 000 J | 0 J | _____ |
| B | _____ | 40 000 J | 50 000 J |
| C | 30 000 J | _____ | _____ |
| D | 0 J | _____ | _____ |
What I Can Do
PERFORMANCE TASK: I Think, Therefore I Am… An Engineer!
Performance Content: Create a device that shows conservation of mechanical energy and answer the questions that follow on the activity you have chosen.
(A) DIY MINIATURE SWING
Objective: To design and build your own miniature swing that will demonstrate the relationships between forces and energy to motion.
Here are some suggested materials to use or you may choose your own materials
- Set of Popsicle stick and chopstick (banana cue stick)
- String
- Stick glue/ Glue Gun
Things to do:
- Name your swing. (5 pts)
- Draw the blueprint on a bond paper (10 pts)
- Include the following in the blueprint (drawing):
- Highest Potential Energy (Hi PE)
- Lowest Potential Energy (Lo PE)
- Highest Kinetic Energy (Hi KE)
- Lowest Kinetic Energy (Lo KE)
Demonstration:
- State the name of your model.
- Identify the components of the amusement ride.
- Identify where PE and KE are maximum or minimum.
- Define total mechanical energy.
- Derive a conclusion that the total mechanical energy of the system remains the same.
Scoring Guidelines: Please refer to Appendix A.2 Rubric.
Summary
- Energy is essential to everyday life. In fact, we cannot do work without it. Though we know that energy is always present everywhere, it is not seen by our naked eye but we can detect evidences of it
- Law of Conservation of Energy. It states that energy cannot be created or destroyed. It can be transferred from object to object and changed into different forms, but the total energy before and after any process is always the same.
- Example of it: As a roller coaster car moves down the track and gains speed: PE is transformed into KE. As a roller coaster car moves up the track, it loses its speed; KE is transformed into PE.
- Conservation of Mechanical Energy states that “The total Mechanical Energy of an isolated system remains the same.
- The change in potential energy is equal to the change in its kinetic energy.
Thus, we say, ME1 = ME2, that is,
PE1 + KE1 = PEF + KEF
Where: PE = mgh
KE = ½ mv2
- For any mechanical process that occurs inside an isolated system and involves only conservative forces, the total mechanical energy is conserved. This means that the total mechanical energy remains constant in time.
(A conservative force is a force with the property that the total work done in moving a particle between two points is independent of the path taken.)
ΔMET = Δ KE + Δ PE = 0, Δ = change (Greek letter delta),
Δ KE = change of Kinetic Energy; and
Δ PE = change of Potential Energy
- The equation above tells us that the initial total mechanical energy ME1 = PE1 + KE1 is equal to the final total mechanical energy MEF = PEF + KEF. In other words, mechanical energy is always conserved.
- Whatever decrease in the amount of PE is also the amount of increase in KE, thus the total mechanical energy at any point remains the same.
Assessment
I. Multiple Choice: Choose the BEST answer. Write your answer on your notebook.
Which of the following happens to raindrops?
- A. Loses potential energy and gains kinetic energy.
- B. Loses both potential energy and kinetic energy.
- C. Gains potential energy and loses kinetic energy.
- D. Gains both potential energy and kinetic energy.
What is the energy of a motorcycle driven down a hill?
- A. entirely kinetic
- B. entirely potential
- C. entirely gravitational
- D. both kinetic and potential
Which event illustrates the direct transformation of potential to kinetic energy?
- A. A volleyball player blocks an incoming ball.
- B. A sleeping cow stirs awake.
- C. The wide-open spring door closes slowly.
- D. The spring of a broken toy shoots up
A runner jumps over a hurdle. Neglecting friction, the potential energy of the runner at the highest point compared to his kinetic energy at the lowest point is
- A. lesser.
- B. equal.
- C. greater.
- D. not related.
The total mechanical energy of a yoyo
- A. is equally divided between kinetic energy and potential energy.
- B. at any one instant, is either all kinetic energy or all potential energy.
- C. can never be negative.
- D. is constant, if only conservative forces act.
Use this figure to answer questions 6-8. Assume that the height at points 1 & 3 are the same.
[illustration: a car at point 1 on a hilltop, a car at point 2 in a valley, and a car at point 3 on a second hilltop of the same height; arrows show the cars moving right]
Figure 7. Illustrator: Jaylen Navato
In the figure, kinetic energy is being converted into potential energy from
- A. point 1 to point 2
- B. point 2 to point 3
- C. Only kinetic energy is here
- D. Energy is not being converted
In the figure, potential energy is being converted into kinetic energy from
- A. point 1 to point 2
- B. point 2 to Point 3
- C. Only PE is here
- D. Energy is not being converted
As the car moves from point 1, to point 2, and finally to point 3, the total energy of the car
- A. decreases from point 1 to point 2, then increases from point 2 to point 3
- B. increases from point 1 to point 2, then decreases from point 2 to point 3
- C. stays the same, but is converted between potential and kinetic energy
- D. is lost between points 2 and 3
A bag drops some distance and gains 90 J of kinetic energy. How much gravitational potential energy did the bag lose?
- A. more than 90 J
- B. exactly 90 J
- C. less than 90 J
- D. cannot be determined from the information given
If the total mechanical energy is 50, determine the potential energy if the kinetic energy is 30 J.
- A. 50 J
- B. 30 J
- C. 20 J
- D. 10 J
Answer Key
What I Know
[transcriber’s note: this part of the page is printed upside down; the answers are transcribed in order from 1 to 10]
- B
- D
- C
- A
- B
- C
- B
- D
- B
- A
Lesson 1: What’s New
[transcriber’s note: the page is printed upside down; the crossword grid letters cannot be reliably read, so only the clues are transcribed]
[chart: crossword puzzle grid; Lesson 1: What’s New]
- A POTENTIAL ENERGY B KINETIC ENERGY
- A NEITHER PE & KE B POTENTIAL ENERGY
- A POTENTIAL ENERGY B KINETIC ENERGY
- A POTENTIAL ENERGY B KINETIC ENERGY
[transcriber’s note: the content boxes on this page are printed upside down; the page number and footer are upright. Transcribed in reading order.]
What’s More
Activity 2: I’m Falling for You
| No. | PE (J) | KE (J) | ME_T = PE + KE (J) |
|---|---|---|---|
| 1 | 200 | 100 | 300 |
| 2 | 400 | 100 | 500 |
| 3 | 25 | 20 | 45 |
| 4 | 0 | 75 | 75 |
What I have Learned
- Moving
- True
- Sum
- Potential Energy
- True
- True
- True
- True
- primary relation
- Potential Energy
Lesson 2: What’s In
- KE
- P.E
- Potential
- Kinetic
- P.E. and K.E.
| PE (J) | KE (J) | ME (J) |
|---|---|---|
| 50 | 70 | 120 |
| 30 | 40 | 70 |
| 30 | 80 | 110 |
| 25 | 25 | 50 |
| 20 | 25 | 45 |
What’s New
Mood Swing
- A
- C
- A
- C
- C
What’s More
Activity 2: Let Me Take a Ride!
| Point | PE (J) | KE (J) | ME (J) |
|---|---|---|---|
| A | 0 | 15 | 15 |
| B | 7 | 8 | 15 |
| C | 15 | 0 | 15 |
[transcriber’s note: the content boxes on this page are printed upside down; the page number and footer are upright. Transcribed in reading order.]
What’s More
Guide Questions
- C
- Total Mechanical Energy from A-C is the same.
a. Student Answer Vary. The kinetic energy at point A is increased, because the cart now gains speed.
b. The potential energy and kinetic energy at point B is the same,
c. The point where kinetic energy is zero is at point C, because the cart now gains height. - The following are the events of the kinetic and potential energy as it travels from point A to C.
a. The kinetic energy at point A is increased, because the cart now gains speed.
b. The potential energy and kinetic energy at point B is the same,
c. The point where kinetic energy is zero is at point C, because the cart now gains height and stops for a moment at the highest point.
What I Have Learned: A. THINK TANK
- True
- Position
- Potential
- 60 J
- sum
- True
- True
- True
- moving up
- in motion
B. FIXING POINT
| POINT | PE (J) | KE (J) | ME_T = PE + KE (J) |
|---|---|---|---|
| A | 50 000 J | 0 J | 50 000 J |
| B | 10,000 J | 40 000 J | 50 000 J |
| C | 30 000 J | 20,000 J | 50,000 J |
| D | 0 J | 50, 000J | 50, 000J |
Assessment
- A
- D
- C
- C
- D
- B
- A
- C
- B
- C
References
Books
4Th Year – Physics Force, Power, Work and Energy Mode Swing Learning Guide. (2009). Mindanao: Basic Education Assistance for Mindanao. pp.37, 40, 44, 46, 52.
DepEd Science 9 Learner’s Module. (2014). p297.
DepEd Science 9 Teachers Guide. (2014). pp.1-2, 20-21.
DepEd Science 9 Open High School Program. Learner Material. (2015). SEAMEO INNOTECH. pp. 334-335,355-356.
For inquiries or feedback, please write or call:
Department of Education – Bureau of Learning Resources (DepEd-BLR)
Ground Floor, Bonifacio Bldg., DepEd Complex Meralco Avenue, Pasig City, Philippines 1600
Telefax: (632) 8634-1072; 8634-1054; 8631-4985
Email Address: blr.lrqad@deped.gov.ph * blr.lrpd@deped.gov.ph
Leave a Reply