Science 8 Quarter 2 Module 1: Earthquakes and Faults

Grade 8 Science Q2 Module 1 explains how movements along normal, reverse, and strike-slip faults generate earthquakes, with activities and an answer key.

This is the Grade 8 Science Quarter 2, Module 1 self-learning module (SLM), Earthquakes and Faults. It was developed by the Department of Education Caraga Region as an Alternative Delivery Mode resource (First Edition, 2019). It is for Grade 8 learners studying at home or in class, and for the parents and teachers who guide them. After this module, learners should be able to explain how movements along faults cause earthquakes.

On this page 6 sections

What learners will learn

The module has one lesson, “How Do Movements Along Faults Generate Earthquakes.” It targets one learning competency:

  • Explain how movements along faults generate earthquakes (S8ES-IIa-14)

Key ideas: faults and earthquakes

The module’s tests, activities, and answer key bring out these core ideas.

  • Fault: a crack, break, or fracture in the lithosphere (the Earth’s crust) between two blocks of rock. A fault can shift and cause an earthquake. Faults can be found on land and under the sea. The module also describes faults as thin zones of crushed blocks of rock, from centimeters to thousands of kilometers long.
  • Earthquake: the shaking or vibration of the Earth’s surface caused by the sudden release of energy in the lithosphere.
  • Slip: the amount of ground displacement in an earthquake.
  • Friction: the force that holds rocks together so they do not slip right away when pushed. The roughness of the rocks is what keeps them from slipping past each other.

How fault movement causes an earthquake

The module’s model answer explains it this way. Stress builds up in the rocks along a fault, but friction holds the rocks in place. When enough stress builds up and overcomes friction, the rocks suddenly slip. This releases energy in waves that travel through the rock, and those waves are the shaking we feel during an earthquake.

The module also notes that Japan, Indonesia, and the Philippines have frequent earthquakes because they lie within the Pacific Ring of Fire.

Types of faults

Type of faultHow the blocks moveLandform or example in the module
Normal faultThe blocks pull apart. The hanging wall moves down relative to the footwall.Valleys
Reverse fault (also called thrust fault)The blocks push together. The hanging wall moves up relative to the footwall, and one block slides on top of the other.Mountains, such as the Himalayas and the Rocky Mountains
Strike-slip (transform) faultThe blocks move sideways past each other, not up or down.Alpine Fault in New Zealand

Earthquakes can happen along all three types of faults.

Parts and activities of the module

  • What I Know: a 15-item multiple-choice pretest on faults and earthquakes.
  • Activity 3, Trace It: learners study a fault map with six cities (A to F). They identify which cities have valleys or mountains and which city is least likely to have an earthquake. Then they explain how fault movements cause earthquakes, scored with a 4-point rubric.
  • What I Have Learned: fill-in-the-blank statements on normal, reverse, and strike-slip faults, earthquakes, and faults.
  • Activity 5, Where Will I Live?: using the same fault map, learners pick the safest city to build a house and explain why. The answer key gives City D, because it is far from any fault and has no risk of ground fissures damaging a house’s foundation.
  • Assessment: a 15-item multiple-choice post-test.
  • Activity 6, It’s Not Your Fault: a crossword puzzle on fault types, earthquakes, and friction.
  • Answer Key: answers for the pretest, the activities, the post-test, and the crossword.

How to use this module

  • Learners: Start with the pretest to check what you already know. Then work through the parts in order and end with the post-test. Write all answers on a separate sheet of paper and do not mark the module. Use the answer key honestly to check your work after you answer.
  • Parents: The module includes Notes to the Teacher for facilitators and parents, with tips for helping your child learn at home. Encourage your child to read each set of directions carefully and to ask the teacher when a task is unclear.
  • Teachers: Use the rubric for the open-ended questions in Activities 3 and 5. The module’s note asks you to give learners extra copies of the crossword puzzle in Activity 6.

Frequently asked questions

What grade and quarter is the Earthquakes and Faults module for?

It is Grade 8 Science, Quarter 2, Module 1. It covers the competency S8ES-IIa-14: explain how movements along faults generate earthquakes.

What are the three main types of faults in this module?

Normal faults, where the blocks pull apart and the hanging wall moves down. Reverse or thrust faults, where the blocks push together and the hanging wall moves up. Strike-slip or transform faults, where the blocks move sideways past each other.

How do movements along faults cause earthquakes?

Friction holds the rocks along a fault together while stress builds up. When the stress overcomes friction, the rocks suddenly slip and release energy in waves, which we feel as an earthquake.

Does the module have an answer key?

Yes. It has answers for the pretest, the activities, the post-test, and the crossword puzzle. Learners are asked to use it honestly.

Why do earthquakes happen often in the Philippines?

According to the module, the Philippines, Japan, and Indonesia have frequent earthquakes because they lie within the Pacific Ring of Fire.

Full text of the module

The text below is a transcription of the PDF above, as printed.

Science Quarter 2 – Module 1: Earthquakes and Faults

8

Science

Quarter 2 – Module 1: Earthquakes and Faults

[illustration: students studying outdoors and at a desk, with a globe and a lamp; ADM (Alternative Delivery Mode) logo below]

CO_Q2_Science 8_ Module 1

Science – Grade 8 Alternative Delivery Mode Quarter 2 – Module 1: Earthquakes and Faults First Edition, 2019

Republic Act 8293, section 176 states that: No copyright shall subsist in any work of the Government of the Philippines. However, prior approval of the government agency or office wherein the work is created shall be necessary for exploitation of such work for profit. Such agency or office may, among other things, impose as a condition the payment of royalties.

Borrowed materials (i.e., songs, stories, poems, pictures, photos, brand names, trademarks, etc.) included in this book are owned by their respective copyright holders. Every effort has been exerted to locate and seek permission to use these materials from their respective copyright owners. The publisher and authors do not represent nor claim ownership over them.

Published by the Department of Education Secretary: Leonor Magtolis Briones Undersecretary: Diosdado M. San Antonio

Development Team of the Module

Authors: Bryan S. Samonte, Novelita D. Celedio, Ailyn N. Lagura Editors: Rhoda M. De Los Santos, Nonita C. Patalinghug Reviewers: Bernabe Linog, Jonivil L. Vidal, Roy B. Piloton, Marilytte N. Ensomo, Rene G. Ebol Illustrators: Angelo Zaldy C. Francia, Victor Genesis O. Odtohan Layout Artist: Celeste Faith R. Almanon, Jay S. Ayap, Argie L. Ty Management Team: Francis Cesar B. Bringas, CESO V; Isidro M. Biol, Jr.; Maripaz F. Magno; Josephine Chonie M. Obseñares; Gregoria T. Su; Marvilyn C. Francia; Jay S. Ayap; Nonita C. Patalinghug

Printed in the Philippines by ________________________ Department of Education – Caraga Office Address: Learning Resource Management and Development Center (LRMDC) Teacher Development Center J.P. Rosales Avenue, Butuan City, Philippines 8600 Telefax: (085) 342-8207/ (085) 342-5969 E-mail Address: caraga@deped.gov.ph

8

Science

Quarter 2 – Module 1: Earthquakes and Faults

Introductory Message

This Self-Learning Module (SLM) is prepared so that you, our dear learners, can continue your studies and learn while at home. Activities, questions, directions, exercises, and discussions are carefully stated for you to understand each lesson.

Each SLM is composed of different parts. Each part shall guide you step-by-step as you discover and understand the lesson prepared for you.

Pre-tests are provided to measure your prior knowledge on lessons in each SLM. This will tell you if you need to proceed on completing this module or if you need to ask your facilitator or your teacher’s assistance for better understanding of the lesson. At the end of each module, you need to answer the post-test to self-check your learning. Answer keys are provided for each activity and test. We trust that you will be honest in using these.

In addition to the material in the main text, Notes to the Teacher are also provided to our facilitators and parents for strategies and reminders on how they can best help you on your home-based learning.

Please use this module with care. Do not put unnecessary marks on any part of this SLM. Use a separate sheet of paper in answering the exercises and tests. And read the instructions carefully before performing each task.

If you have any questions in using this SLM or any difficulty in answering the tasks in this module, do not hesitate to consult your teacher or facilitator.

Thank you.

Lesson 1: How Do Movements Along Faults Generate Earthquakes

What I Need to Know

This module was designed and written with you in mind. It is here to help you master about earthquakes and faults. The scope of this module permits it to be used in many different learning situations. The language used recognizes the diverse vocabulary level of students. The lessons are arranged to follow the standard sequence of the course. But the order in which you read them can be changed to correspond with the textbook you are now using.

After going through this module, you are expected to:

Explain how movements along faults generate earthquakes. S8ES-IIa-14

What I Know

Directions: Choose the letter of the correct answer. Write your answers on a separate sheet of paper.

  1. What is a crack or break in the lithosphere that can shift and cause an earthquake?
    A. Epicenter
    B. Eruption
    C. Fault
    D. Focus


  2. What do you call a fault where two blocks of crust pull apart and create space?
    A. Normal fault
    B. Reverse fault
    C. Strike-slip fault
    D. Transform fault


  3. How will you describe the movement of the walls in a strike-slip fault?
    A. moving sideways
    B. pulling the side apart
    C. pushing the side together
    D. pushing and pulling the sides


  4. How does a reverse fault form?
    A. The blocks slide past each other.
    B. The blocks pull apart from each other.
    C. The hanging wall moves upward relative to the footwall.
    D. The hanging wall moves downward relative to the footwall.


  5. What do you call the amount of ground displacement in an earthquake?
    A. Crack
    B. Dip
    C. Fold
    D. Slip


  6. What type of fault is illustrated in the picture?
    A. Normal
    B. Reverse
    C. Strike-slip
    D. Transform


[illustration: block diagram of a fault with a tree growing on the top surface] Illustrated by: Angelo Zaldy C. Francia

  1. How will you describe the movement of fault in this illustration?
    A. moving sideways
    B. pulling the sides apart
    C. pushing the sides together
    D. moving in vertical direction

[illustration: block diagram of a fault with a tree on the top surface and arrow pointing upward] Illustrated by: Angelo Zaldy C. Francia

  1. Which of the following geologic features is an example of a reverse fault?
    A. Anatolian fault
    B. San Andreas fault
    C. Himalayas mountain
    D. East African rift zone


  2. What refers to a vibration of the Earth due to the rapid release of energy?
    A. Earthquake
    B. Fault
    C. Friction
    D. Stress


  3. Earthquakes happen along a fault line. Which of the following is NOT true about fault?
    A. It can be found on land.
    B. It is where fault cyclone starts.
    C. It can be found under the sea.
    D. It is a break in the Earth’s crust.


  4. In which type of fault can earthquake occur?
    A. Normal
    B. Reverse
    C. Transform
    D. All of these


  5. Which type of fault would be least likely to occur along the valley?
    A. Normal
    B. Reverse
    C. Thrust
    D. Transform


  6. What type of fault is illustrated in the picture?
    A. Normal
    B. Reverse
    C. Strike-slip
    D. Transform


[illustration: block diagram of a fault with a tree on the top surface and arrows showing horizontal movement of the two blocks] Illustrated by: Angelo Zaldy C. Francia

CO_Q2_Science 8_ Module 1

  1. The Alpine Fault cuts through New Zealand. At this location, two plates are sliding past each other slowly over time. What type of fault exists at Alpine Fault?
    A. Divergent
    B. Normal
    C. Reverse
    D. Transform


  2. What is the movement of a strike-slip fault?
    A. Backwards
    B. Downward
    C. Sideways
    D. Upward


Activity 3. Trace It

Directions: Study the figure and refer to the legend below. Answer the questions that follow. Write your answers on a separate sheet of paper.

[chart: fault map; Figure 3: Fault Map] Labels: City A; City B; City C; City D; City E; City F Legend: Normal fault (solid line); Reverse fault (dashed line); Transform fault (dotted line) Illustrated by: Bryan S. Samonte

Legend: Normal fault / Reverse fault / Transform fault

  1. Which cities have valleys? _____________________
  2. Which cities have mountains? _____________________
  3. Which among the cities has the least probability of having an earthquake? _____________________
  4. How do movements along faults generate earthquakes?

Rubric

Advance (4 points)Proficient (3 points)Nearly Proficient (2 points)Emerging (1 point)
Answer is well-organized and completely explained the details.Answer is organized and some details are explained.Answer is not organized and details are unclear.Answer does not make sense and shows no details.

What I Have Learned

Directions: Fill in the blanks with the correct term to complete the statements. Write your answers on a separate sheet of paper.

  1. _____________ faults form when the hanging wall drops down.
  2. _____________ faults form when the hanging wall moves up.
  3. _____________ faults have walls that move sideways, not up or down.
  4. _____________ is the shaking of the surface of the Earth resulting from the sudden release of energy in the lithosphere.
  5. _____________ are thin zones of crushed blocks of rocks. These are often in centimeters to thousands of kilometers long.

What I Can Do

Activity 5. Where Will I Live?

Directions: Analyze Figure 3 below to help you decide on the safest city you want to reside. Write your answers on a separate sheet of paper.

[chart: fault map; Figure 3: Fault Map] Labels: City A; City B; City C; City D; City E; City F Legend: Normal fault (solid line); Reverse (dashed line); Transform (dotted line) Illustrated by: Bryan S. Samonte

Questions:

  1. Which cities are along the normal fault? _____________________
  2. In which city is the safest place to build a house? _____________________
  3. Why did you choose that city?


Rubric

Advance (4 points)Proficient (3 points)Nearly Proficient (2 points)Emerging (1 point)
Answer is well-organized and completely explained the details.Answer is organized and some details are explained.Answer is not organized and details are unclear.Answer does not make sense and shows no details.

Assessment

Directions: Choose the letter of the correct answer. Write your answers on a separate sheet of paper.

  1. The stress along the outer layer of the Earth causes the build-up of energy. What prevent the rocks from releasing this energy?

    • A. bending of rocks
    • B. vibration of the rocks
    • C. friction between rocks
    • D. energy released by rocks
  2. Why do earthquakes occur frequently in Japan, Indonesia, and Philippines?

    • A. They are surrounded by seas.
    • B. They are located near the equator.
    • C. They are considered archipelagic countries.
    • D. They are found within the Pacific Ring of Fire.
  3. Which factor keeps the rocks from slipping past each other?

    • A. Arrangement
    • B. Bending
    • C. Depth
    • D. Roughness
  4. What type of fault formed the Rocky Mountains?

    • A. Normal
    • B. Reverse
    • C. Strike-slip
    • D. Transform
  5. What happens to the rocks in a fault slip?

    • A. They stick together.
    • B. They slide past each other.
    • C. There is no movement at all.
    • D. They suddenly slip and generate earthquake.
  6. What is referred to as a fracture between two blocks of rocks?

    • A. Earthquake
    • B. Fault
    • C. Stress
    • D. Volcano
  7. What type of fault is the San Andreas fault?

    • A. Normal
    • B. Reverse
    • C. Strike-slip
    • D. Thrust
  8. Which type of fault is described by two blocks of crust pushing together?

    • A. Normal
    • B. Reverse
    • C. Strike-slip
    • D. Thrust
  9. Which of the following figures illustrates normal fault?

    • A. [illustration: fault block diagram with a tree on top]
    • B. [illustration: fault block diagram with a tree and dashed layers]
    • C. [illustration: fault block diagram with a tree and dotted layers]
    • D. [illustration: fault block diagram with arrows and a tree on a flat block]

All illustrations by: Angelo Zaldy C. Francia

  1. How do faults produce earthquakes?
  • A. Once friction is overcome, a fault slip produces earthquake.
  • B. Molten rock materials accumulate and go out along a fault.
  • C. Tectonic plates collide forming a volcano and causing earthquake.
  • D. Magma and lava cause the ground to move producing earthquake.
  1. Which type of fault is described by a hanging wall slipping down the footwall?
  • A. Normal
  • B. Reverse
  • C. Strike-slip
  • D. Transform
  1. What type of fault is described by rocks moving sideways past each other?
  • A. Converge
  • B. Normal
  • C. Reverse
  • D. Transform
  1. What is referred to as the shaking of the Earth’s surface resulting from the sudden release of energy in the lithosphere?
  • A. Earthquake
  • B. Fault
  • C. Friction
  • D. Stress
  1. What type of fault shows two plates moving apart from each other?
  • A. Normal
  • B. Reverse
  • C. Strike-slip
  • D. Transform
  1. How does a reverse fault form?
  • A. The blocks slide past each other.
  • B. The blocks pull apart from each other.
  • C. The hanging wall moves upward relative to the footwall.
  • D. The hanging wall moves downward relative to the footwall.

Additional Activities

Activity 6. It’s Not Your Fault

Directions: Complete the crossword puzzle below. Write your answer inside the box.

[illustration: crossword puzzle grid with numbered cells 1 to 7 (cells 1 to 7 as printed), blank answer boxes]

Figure 4: Crossword Puzzle

[transcriber’s note: a faint fragment of printed text near the lower right of the grid is too indistinct to read]

Across

  1. Other term for reverse fault
  2. A vibration of the Earth due to the rapid release of energy
  3. A type of fault that slides one block of crust on top of another
  4. A force that holds the rocks together, so they do not slip promptly when pushed sideways

Down

  1. Two blocks of crust layer pull apart
  2. A crack or break in the lithosphere that can shift and create an earthquake.
  3. Show rocks on either side of the fault plane moves horizontally in the nearly opposite directions.

Notes to the Teacher

Provide extra copies of this activity for students’ use.

Answer Key

What I know

1. C 6. A 11. D 2. B 7. A 12. B 3. A 8. C 13. B 4. C 9. A 14. D 5. D 10. B 15. C

What’s New
Activity 1

1. Reverse Fault 2. Normal Fault 3. Strike-slip Fault

What’s More
Activity 2

1. B 2. C 3. A

What’s More
Activity 3

1. Cities A, B, and E 2. Cities C, E, and F 3. City D 4. The friction across the surface of the fault holds the rocks together in order that they don’t slip immediately when pushed sideways. Eventually enough stress builds up and thus sudden slip of the rocks, releasing energy in waves that travel through the rock to cause the shaking that we feel during earthquake.

What’s More
Activity 4

1. Active 2. Inactive 3. Inactive 4. Active

What I have Learned

1. a. normal b. reverse c. strike slip 2. Earthquake 3. Fault

What can I Do?
Activity 5

1. Cities A, B, and E 2. City D 3. Because City D is far from any fault. There is no hazard of ground fissure which could damage the foundation of the house.

Assessment

1. C 6. B 11. A 2. D 7. A 12. D 3. D 8. B 13. A 4. B 9. C 14. A 5. D 10. A 15. C

Additional Activity
  1. normal
  2. thrust
  3. fault
  4. strike slip
  5. earthquake
  6. reverse
  7. friction

Reference

Department of Education, Science 8 Learner’s Module, First Edition 2013, Page 155.

For inquiries or feedback, please write or call:

Department of Education – Bureau of Learning Resources (DepEd-BLR)

Ground Floor, Bonifacio Bldg., DepEd Complex Meralco Avenue, Pasig City, Philippines 1600

Telefax: (632) 8634-1072; 8634-1054; 8631-4985

Email Address: blr.lrqad@deped.gov.ph * blr.lrpd@deped.gov.ph

One response to “Science 8 Quarter 2 Module 1: Earthquakes and Faults”

Leave a Reply

Your email address will not be published. Required fields are marked *

For students and teachers

Looking for a school?

Look up the enrollment, teachers, classrooms and facilities of more than 60,000 schools across the Philippines, from DepEd’s public data. Free to use.

Philippine Schools Directory by TeacherPH · every region, province, division and district