This is the Science Grade 8, Quarter 1, Module 9 self-learning module, Safe Electricity Application, from DepEd Caraga Region (Alternative Delivery Mode, First Edition, 2019). It helps Grade 8 learners understand and apply electrical safety measures and devices at home. By the end, learners should be able to explain how circuit breakers, fuses, earthing, double insulation, and other home safety devices protect people and appliances.
On this page 5 sections
What learners will learn
After going through this module, learners are expected to:
- Explain the functions of circuit breakers, fuses, earthing, double insulation, and other safety devices in the home (MELC Week 7, S8F).
The module has one lesson: Lesson 1: Electrical Safety Measures and Devices at Home. It starts from a simple question: what safety measures and devices protect us when electricity is not installed or used properly?
Key ideas in this module
Electrical hazards and how current harms the body
An electrical hazard (or electric shock) is a condition caused by direct or indirect contact with an energized conductor or equipment. It can injure a person, damage property, or both. Current can pass through the body through:
- direct contact with live parts of an installation
- accidental contact with damaged wires that seem not to be live
- direct contact with a grounded surface
Current damages the body in three ways. It can disturb the brain and heart, which may lead to cardiac arrest or death. It can cause intense heat that burns the skin. It can also make muscles contract in ways that are hard to control.
The module gives these resistance figures:
| Condition of skin | Resistance |
|---|---|
| Dry skin | over 500,000 Ω |
| Wet skin | about 1,000 Ω |
| Broken skin (burned or pierced) | about 500 Ω |
The safest habit is to shut down the main switch before any electrical repair. Insulated tool handles and rubber-soled shoes are not completely safe.
Why A.C. is more dangerous than D.C.
- Direct current (D.C.) flows in one direction, like the current from a battery.
- Alternating current (A.C.) changes direction. In the Philippines it changes direction 60 times every second (60 Hz).
At 60 Hz, as little as 25 volts can kill. A.C. makes the body sweat, which lowers skin resistance. This is why a victim must be freed from the current quickly, without putting the rescuer in danger.
Faulty wiring: short circuit and grounded circuit
Faulty wiring is a leading cause of fire. Have the house wiring checked by your barangay electrician if you notice these warning signs:
- Lights dim or flicker when another appliance is turned on.
- Appliances do not have a permanent outlet.
- Many extension cords are used.
- Fuses blow or circuit breakers trip often.
Faulty wiring can cause two dangerous circuit conditions:
- Short circuit: current takes a path with little or zero resistance, for example through worn-out wires with exposed metal. By Ohm’s Law (I = V/R), when R approaches zero, the current becomes extremely large. This can spark violently and start a fire if safety devices do not shut it down.
- Grounded circuit: current bypasses its normal path and flows through the metal casing of an appliance, such as a refrigerator. Touching the casing can cause electric shock.
Electrical safety devices and measures
| Device or measure | What it does |
|---|---|
| Circuit breaker | Uses electromagnets and bimetallic strips to shut down automatically when there is overloading. It cannot be turned on until the short circuit is fixed. |
| Fuse | A metal ribbon that melts when current goes above its rating. Replace it only after the cause of overloading is found and repaired. Never use a jumper wire. |
| Automatic Voltage Regulator (AVR) | Turns a fluctuating voltage into a steady voltage to protect appliances. |
| Uninterruptible Power Supply (UPS) | Gives emergency power during a sudden power interruption. It also works like an AVR. |
| Earthing or grounding | Connects the appliance’s metal casing to the earth, the best path for excess current. It protects users from grounded circuits. |
| Double insulation | Done by manufacturers so that live wires cannot touch the casing even if they come loose. This removes the need for earthing. |
The module also includes a news article from Cebu City. It names electrical misuse as the top cause of fires there and warns against “octopus” connections (several devices plugged into one outlet or a multi-outlet extension cord), substandard Christmas lights, and illegal connections. Illegal connections are punishable under Republic Act No. 7832.
How to use this module
The module follows the usual self-learning module parts, in this order:
- What I Know: a 15-item multiple-choice pretest.
- What’s In: Activity 1 (calculating current as resistance changes) and Activity 2 (advantages and disadvantages of series and parallel circuits).
- What’s New: Activity 3, reading the Cebu City news article and listing the electrical hazards.
- What is It: the lesson discussion.
- What’s More: Activity 4, checking which safety devices are found at home and explaining their functions.
- What I Have Learned: a fill-in-the-blanks review.
- What I Can Do: Activity 5, a picture of a worn-out extension wire with questions.
- Assessment: 15 true-or-false items where false statements are corrected.
- Additional Activities: Activity 6, finding at least 8 hazards in pictures of a home.
Learners: Write all answers on a separate sheet of paper, not on the module. Use the answer key honestly to check your work after answering.
Parents: Activity 4 asks your child to look around the house for a circuit breaker, fuse, AVR, UPS, earthing, and double-insulated cords. You can walk through the house together. Remind your child never to touch wiring or open a fuse box.
Teachers: Activities 4 and 5 use a 2-1-0 rubric (conceptually complete, incomplete, or none). The answer key covers every activity and test. Please double-check the printed Activity 1 answers using I = V/R. For example, 12.0 V ÷ 0.125 Ω = 96 A, but the key prints 56 A, and the rows below it follow from that error.
Frequently asked questions
What grade and quarter is this Science module for?
It is Science Grade 8, Quarter 1, Module 9, Safe Electricity Application. It was developed by DepEd Caraga Region.
What competency does the module cover?
It covers explaining the functions of circuit breakers, fuses, earthing, double insulation, and other safety devices in the home, listed as MELC Week 7, S8F.
Does the module have an answer key?
Yes. It has answers for the pretest, all activities, the fill-in-the-blanks review, and the assessment. The printed Activity 1 current values from the 0.125 Ω row down do not match I = V/R and should be checked.
What is the difference between a short circuit and a grounded circuit?
In a short circuit, current takes a path with little or zero resistance, so the current becomes extremely large and can cause sparks and fire. In a grounded circuit, current flows through the metal casing of an appliance, which can shock anyone who touches it.
What is the difference between a fuse and a circuit breaker?
Both cut the current when there is overloading. A fuse has a metal ribbon that melts and must be replaced, while a circuit breaker shuts down automatically and can be turned back on once the problem is fixed.
Full text of the module
The text below is a transcription of the PDF above, as printed.
Science Quarter 1 – Module 9: Safe Electricity Application
8
CO_Q1_Science8_Module9
Science – Grade 8 Alternative Delivery Mode Quarter 1- Module 9: Safe Electricity Application First Edition, 2019
Republic Act 8293, section 176 states that: No copyright shall subsist in any work of the Government of the Philippines. However, prior approval of the government agency or office wherein the work is created shall be necessary for the exploitation of such work for a profit. Such agency or office may, among other things, impose as a condition the payment of royalties.
Borrowed materials (i.e., songs, stories, poems, pictures, photos, brand names, trademarks, etc.) included in this book are owned by their respective copyright holders. Every effort has been exerted to locate and seek permission to use these materials from their respective copyright owners. The publisher and authors do not represent nor claim ownership over them.
Published by the Department of Education Secretary: Leonor Magtolis Briones Undersecretary: Diosdado M. San Antonio
| Development Team of the Module | |
|---|---|
| Writer: | Rey R. Angel |
| Editor: | Estella Marie R. Lagleva |
| Reviewers: | Bernabe L. Linog, Relyn D. Raza, Kevin Hope Z. Salvaña, Jonas F. Saldia, Delia C. Pioco, Nonita C. Patalinghug |
| Illustrator: | Rosa Mia L. Pontillo |
| Layout Evaluators: | Celeste Faith R. Almanon, Jay S. Ayap |
| Management Team: | Francis Cesar B. Bringas, CESO V Isidro M. Biol, Jr. Maripaz F. Magno Josephine Chonie M. Obseñares Gregoria T. Su Marvilyn C. Francia Jay S. Ayap Nonita C. Patalinghug |
Printed in the Philippines by ______________________
Department of Education – Caraga Region
Office Address: Teacher Development Center, J.P. Rosales Avenue, Butuan City, Philippines 8600 Telefax: (085) 342-8207/(085) 342-5969 E-mail Address: caraga@deped.gov.ph
8
Science Quarter 1 – Module 9: Safe Electricity Application
Introductory Message
This Self-Learning Module (SLM) is prepared so that you, our dear learners, can continue your studies and learn while at home. Activities, questions, directions, exercises, and discussions are carefully stated for you to understand each lesson.
Each SLM is composed of different parts. Each part shall guide you step-by-step as you discover and understand the lesson prepared for you.
Pre-tests are provided to measure your prior knowledge on lessons in each SLM. This will tell you if you need to proceed on completing this module or if you need to ask your facilitator or your teacher’s assistance for better understanding of the lesson. At the end of each module, you need to answer the post-test to self-check your learning. Answer keys are provided for each activity and test. We trust that you will be honest in using them.
In addition to the material in the main text, Notes to the Teacher are also provided to our facilitators and parents for strategies and reminders on how they can best help you on your home-based learning.
Please use this module with care. Do not put unnecessary marks on any part of this SLM. Use a separate sheet of paper in answering the exercises and tests. And read the instructions carefully before performing each task.
If you have any questions in using this SLM or any difficulty in answering the tasks in this module, do not hesitate to consult your teacher or facilitator.
Thank you.
What I Need to Know
This module was designed and written with you in mind. It is here to help you understand and apply electrical safety measures and devices at home. The scope of this module permits it to be used in many different learning situations. The language used recognizes the diverse vocabulary level of students. The lessons are arranged to follow the standard sequence of the course. But the order in which you read them can be changed to correspond with the textbook you are now using.
After going through this module, you are expected to:
- Explain the functions of circuit breakers, fuses, earthing, double insulation, and other safety devices in the home. (MELC Week 7 S8F)
What I Know
Directions: Choose the letter of the correct answer. Write your answers on a separate sheet of paper.
It is a device that maintains steady supply of voltage to your appliances at home.
- A. Fuse
- B. Resistor
- C. Circuit breaker
- D. Voltage regulator
Which of the following statements is NOT true about safety devices used at home?
- Safety devices are used to prevent electric shock.
- Safety devices cut the flow of current in case of overloading.
- Safety devices supply unsteady amount of voltage to protect appliances against overloading.
- Safety devices are used to provide alternative route for current in the case of a grounded circuit.
The fuse at home has “blown” up many times. Which of the following must NOT be done to solve the problem and prevent it from happening again?
- A. Buy fuse with standard amperage rating.
- B. Do not use all appliances simultaneously.
- C. Call your barangay electrician to fix your electrical problem.
- D. Use jumper wire or cover the blown fuse with available silver paper.
Which electrical device shuts down when there is overloading in the circuit?
- A. Fuse
- B. Voltage source
- C. Circuit breaker
- D. Electrical switch
Which electrical device blows up when there is overloading in the circuit?
- A. Fuse
- B. Switch
- C. Resistor
- D. Circuit breaker
Why is earthing used at home?
- A. To prevent short circuit
- B. To cut the circuit in case of overloading
- C. To reduce the resistance of the appliance
- D. To provide alternative route of upsurge current in case of grounded circuit.
At home, you noticed that a portion of an electrical wire is worn out, exposing its metallic part. What do you think might happen if you will just ignore this problem?
- A. short circuit may happen
- B. circuit is of better condition
- C. overloading may not happen
- D. nothing happens when someone touches the wire
What electrical circuit condition in which current returns and takes the path of metal casing of an appliance?
- A. short circuit
- B. series circuit
- C. parallel circuit
- D. grounded circuit
Which of the following directs any excess current in the metal casing of appliances to the ground?
- A. Fuse
- B. Earthing
- C. Circuit breaker
- D. Electric sockets
Which electrical connection involves plugging of several devices to an outlet or to an extension wire with multiple outlets?
- A. Earthing
- B. Single insulation
- C. Double insulation
- D. Octopus connection
Which situation shows that current could go through the body?
- A. Direct contact with a grounded surface
- B. Direct contact with live parts of the installation
- C. Accidental contact with damaged wires that are seemingly not live
- D. All of the above
What safety measure has been done by appliance manufacturers to prevent electric shock and grounded external casing of appliances?
- A. Grounding
- B. Using AVR
- C. Double Insulation
- D. Using circuit breaker
The following are effects of alternating current in the body EXCEPT:
- A. It can lead to stronger muscles in the body.
- B. It can cause improper function of the brain and heart.
- C. Muscles will involuntarily contract which will be hard to control.
- D. The body will experience intense heat that can cause skin burning.
How do you prevent from experiencing electric shock at home?
- A. Recycle blown up fuse
- B. Regularly check household wirings
- C. Plug electrical appliances with wet hand
- D. Continue using worn-out extension wire
When do you consider repairing electrical wirings at home?
- A. when a newly bought extension cord is used
- B. when electrical appliances are in good condition
- C. when fuses blows out or circuit breakers trip off frequently
- D. when lights do not flicker even if other appliances are turned on
[transcriber’s note: these pages carry printed page numbers 5 to 12; the page markers below follow the PDF page numbers 9 to 16]
Lesson 1 – Electrical Safety Measures and Devices at Home
Electricity, if not properly installed and not properly used could mean injury, harm, or even death. So, what safety measures should we follow to prevent injury or an untimely death? What are the electrical devices that can protect us from a sudden surge of electrical energy?
What’s In
Activity 1. Calculating Current with Varying Resistance
Directions: Calculate the current, complete the table and answer the questions below. Write your answers on a separate sheet of paper.
| Voltage (V) | Current (A) | Resistance (Ω) |
|---|---|---|
| 12.0 | 1.0 | |
| 12.0 | 0.5 | |
| 12.0 | 0.25 | |
| 12.0 | 0.125 | |
| 12.0 | 0.062 | |
| 12.0 | 0.031 | |
| 12.0 | 0.016 | |
| 12.0 | 0.008 | |
| 12.0 | 0.004 | |
| 12.0 | 0.002 |
- What happens to current as resistance decreases?
- Predict what will happen to current as resistance approaches zero?
Activity 2. Advantages and Disadvantages of Series and Parallel Circuits
Directions: Write AS if the statement tells about an advantage of a series circuit, DS if it tells about a disadvantage of a series circuit, AP if it is an advantage of a parallel circuit, and DP if it is a disadvantage of a parallel circuit. Write your answers on a separate sheet of paper.
- If one of the light bulbs is damaged or removed, all other light bulbs in the circuit will not light too.
- Even if one of the light bulbs is damaged in this circuit, all other light bulbs will still function since the flow of current is not entirely interrupted.
- It is difficult to install, maintain, and repair since large volume of conducting wires is needed.
- It does not overheat easily.
- Overloading may happen if appliances are simultaneously used at home.
What’s New
Activity 3: It is Reading Time!
Directions: Read the news article carefully. List all the mentioned electrical hazards that may lead to fire. Write your answers on a separate sheet of paper.
Electrical Misuse is No. 1 Cause of Fires in Cebu City
BEWARE of “octopus” connections, substandard Christmas lights and cooking fires that go untended.
These are some of the reminders of the Bureau of Fire Protection (BFP) in Cebu City in its daily visits to barangays.
In mid-October, Cebu City Fire Marshall Aderson Comar and the Visayan Electric Co. (Veco) launched the fire safety inspectors’ barangay visitation program. Handouts remind residents about common causes of fire—throwing lighted cigarette butts, unattended cooking, children playing with matches or lighters, electrical misuse, gas leaks, bonfires and arson.
Comar said electrical misuse tops the list (103 cases) followed by unattended cooking (26) in Cebu City cases from Jan. 1 to Nov. 30.
Two deaths were recorded and property damage reached P15.4 million. “This is mostly because of illegal connections and the use of octopus wires,” Comar told Cebu Daily News.
An octopus electrical connection involves plugging several devices to a wall socket. This also refers to an extension cord with multiple outlets.
This poses overheating or an electrical overload. Fire incidents increased during the last quarter of the year because of the use of Christmas lights, said Comar.
“Christmas lights especially substandard products are dangerous because these can cause fire,” said Ethel Natera, Veco corporate communications manager.
Each of the city’s nine fire substations has one fire safety inspection team composed of a firefighter and Veco personnel.
Escorted by barangay officials, the inspection team visits barangays and devotes at least an hour each day to encourage residents to adopt fire safety measures.
They remind residents to prevent their children from playing with matches and candles as well as do away with the use of octopus wiring.
Veco staff also extend free service to residents who want their electrical connections checked.
“Our barangay campaigns are proven effective because it increased people’s awareness especially on the causes of fire,” said Comar.
He said residents have also learned not to panic and to immediately call the nearest fire substation for assistance in case of fire.
With the Cebuanos’ increased awareness, Comar said firefighters are also able to respond to fire alarms in less than seven minutes, which is the standard emergency response time in the country.
Illegal Connections
According to Veco, illegal connections are the most common causes of fire especially in thickly populated areas.
Unauthorized connections are normally done using “bare wires” and without any protective devices.
Illegal connections tend to overload the supply line thereby causing power tripping and interruption.
Overloading also causes power voltage to drop. Overvoltage or undervoltage is one cause of damaging appliances like refrigerators, air conditioners and television sets.
Illegal connection is punishable under Republic Act No. 7832 or the Rules and Regulations of the Anti- Pilferage of Electricity and Theft of Electric Transmission Lines/Materials Act of 1994.
Unauthorized electric tapping is tantamount to theft. The penalty is imprisonment of six to 12 years or a fine ranging from P10, 000 to P20, 000 or both upon the discretion of the court. Violators will pay the estimated amount of stolen electricity plus a surcharge of up to 100 percent.
Natera said Veco created a revenue protection department in mid-2010 to go after electricity thieves.
Personnel conduct random check on residences especially after they noticed a sudden drop in the occupant’s electric consumption.
Veco is closely coordinating with the local government and the police in the program.
Natera said some consumers resort to illegal tapping to avoid the application cost without realizing the risk they are taking. /Doris C. Bongcac, Chief of Reporters
Source: https://newsinfo.inquirer.net/118483/electrical-misuse-is-no-1-cause-of-fires-in-cebu-city#ixzz6QT5NFtJI
What is It
What is Electrical Hazard?
Electrical hazard or electric shock is a condition due to direct or indirect electrical contact with energized conductor or equipment, and from which a person may sustain electrical injury from shock or damage to property or both.
When working with or nearby electrical installations, an electrical shock, arc flash or arc blast can occur and current can go through the body due to the following situations:
- Direct contact with live parts of the installation.
- Accidental contact with damaged wires that are seemingly not live.
- Direct contact with a grounded surface
The Fatal Current
Electric current damages the body in three ways:
- It can cause improper function of the brain and heart. May lead to cardiac arrest or death.
- The body will experience intense heat that can cause skin burning.
- Muscles will involuntarily contract which will be hard to control.
Dry skin has a resistance against current over 500,000 Ω, while wet skin has only 1000 Ω. However, once the skin breaks through, for example by burning or wire piercing the skin, the body will have 500 Ω resistance.
A current traveling from finger to elbow through the arm may produce only a painful shock, but that same current traveling from hand to foot or through the chest from hand to hand may well be dangerous. So, the practice of using only one hand (keeping one hand behind your back) while working on high-voltage circuits is a good safety habit. Even better would be to disconnect all sources of power from the equipment you are about to repair. Do not rely on insulated tool handles, rubber-soled shoes, etc., to protect you. But it is better to shut down the main switch of voltage source before doing any electrical repairs. Relying on insulated handles, rubber-soled shoes are not completely safe.
A.C. is More Dangerous than D.C.
Direct Current (D.C.) – is a current that travels from negative to the positive terminal. It does not change its direction. It is the current we can get from a battery. D.C. passing your body can not cause electric shock but can cause burning if the positive and negative wire can come into contact.
Alternating Current (A. C.) – is a current that travels from negative to positive; and, from positive to negative terminals. In our country, it keeps on changing direction 60 times every second. It is the current that does the damage, not the voltage.
The changing direction of A.C. has a lot to do with the effect of the human body. The frequency of 60 Hz or 60 cycles/second as little as 25 volts can kill. It stimulates sweating, which lowers the skin resistance. That is why it is very important to free the victim from current contact as quickly as possible, without endangering the rescuer, before cardiac arrest to happen.
Faulty Electrical Wiring
One leading cause of the fire is faulty electrical wiring. How do you know that you should have your house electrical wiring be repaired? Check on for the following warning signs:
Lights dim or flicker when another appliance is turned on.
Appliances do not have permanent outlet.
Many extension cords are utilized.
Fuses blow or circuit breakers trip frequently
To prevent fire from happening, contact your barangay electrician to fix your faulty electrical wiring. Here are the following circuit conditions with faulty electrical wiring:
1. Short Circuit refers to a circuit condition in which a current takes the path of less resistance or zero resistance as shown in Figure 2. A short circuit happens when there is overloading of current making the conducting wire extremely hot that can cause the melting of insulators until two live wires come into contact. Why does short circuit happen when electrical connection has worn out wires? Since metallic part of conducting wires is exposed, current could possibly flow through another path.
Using Ohm’s Law: V = I R
I = V/R when R = 0
I = approaches infinity. Meaning the amount of current is extremely high. It is the huge amount of current that sparks violently if the main switch does not shut down through its safety devices, and fire will surely happen.
[illustration: schematic diagram of a short circuit showing a battery, a light bulb, a fuse, and a spark at the short-circuit path]
Fig. 2 Schematic Diagram of Short Circuit Illustrated by: Rosa Mia L. Pontillo
2. Grounded circuit refers to circuit condition where current traveling from the positive conducting wire, bypass the negative conducting wire and flows through by through the metal casing of an appliance instead, as shown in Figure 3. Remember that A.C. changes direction 60 times/second so touching the grounded metal can cause electric shock.
[illustration: a person touching a grounded refrigerator, with a wiring detail in a circle]
Fig. 3 Grounded refrigerator Illustrated by: Rosa Mia L. Pontillo
In order to prevent accidents and injuries brought about short and grounded circuits, safety devices must be installed in all electrical lines and safety measures must be observed at home.
Electrical Safety Devices
Circuit breaker uses electromagnets and bimetallic strips to open a switch in cases of overloading. It automatically shuts down if there is overloading due to short circuit. It cannot be turned on unless the short circuit is fixed.
[photo: circuit breaker] Illustrated by Rosa Mia L. Pontillo
Fuse is made up of metal ribbon that will heat up and melt if the current exceeds its current rating. Once the fuse is blown out, it must be replaced with a new one after the source of overloading is determined and repaired. It is unsafe to use jumper wire since it may not melt when there is current overloading.
[photo: fuse rated 10 A] Illustrated by Rosa Mia L. Pontillo
Automatic Voltage Regulator (AVR) is a device designed to protect our home appliances by regulating voltage automatically. It takes a fluctuating voltage level return into a constant voltage level.
[photo: automatic voltage regulator] Illustrated by Rosa Mia L.Pontillo
Uninterruptible Power Supply (UPS) an electrical safety device which provides emergency power to the load when there is unexpected power disruption. It also functions like an AVR.
[photo: uninterruptible power supply] Illustrated by Rosa Mia L. Pontillo
Electrical Safety Measures
Earthing or Grounding is a system of connecting the metal casing of the appliance to earth. Earthing protects the user from a grounded circuit. Earth is the best path for any excess current. Grounding prevents damage to appliances, injury, and death of an electrical user.
[illustration: a grounded plug and wire connected to a wall outlet] Illustrated by Rosa Mia L. Pontillo
Double Insulation is a safety measure done by appliance manufacturers to prevent electric shock and grounded external casing of appliances. With double insulation, live wires within the appliances cannot touch the casing even if wires become loose, thus eliminating the need for earthing.
[photo: double-insulated electrical cord] Illustrated by Rosa Mia L. Pontillo
What’s More
Activity 4: Safety at Home
Directions: Complete the table below. Write your answers on a separate sheet of paper.
| Electrical Devices and Safety Measures | Check if found at home, otherwise mark X if not found at home. | Explain in your own simple words the function. |
|---|---|---|
| 1. Circuit breaker | ||
| 2. Fuse | ||
| 3. Automatic Voltage Regulator | ||
| 4. Uninterruptible Power Supply | ||
| 5. Earthing | ||
| 6. Double insulation |
| Rubric for Scoring | |
|---|---|
| 2 points | Explanations are conceptually complete. |
| 1 point | Explanations are conceptually incomplete. |
| 0 | No explanations |
What I Have Learned
Directions: Fill in the blanks. Write your answers on a separate sheet of paper.
- _____________ is a condition due to direct or indirect electrical contact with energized conductor or equipment.
- Circuit breaker is a device that automatically trips off or shuts down when _____________ exists in the circuit.
- _____________ is a device that blows up when there is overloading in the current.
- Earthing is a safety measure that connects the metal parts of an appliance to the _____________.
- Double insulation prevents live wires or exposed wires from _____________ the metal part of an appliance.
- Short circuit condition occurs when current takes the path of _____________ resistance that would result to infinite amount of current, causing sudden explosion in the circuit.
- _____________ is a condition when conducting wire touches the metallic part of the appliances, potentially causing electric shock to anyone who is able to touch the appliances.
What I Can Do
Activity 5. Electrical Hazard at Home
Directions: Study the picture and answer the questions that follow. Write your answers on a separate sheet of paper.
[illustration: hand plugging an extension cord with a worn-out, frayed section into a wall outlet, with a close-up of the damaged wire]
Figure 4. Worn out extension wire Illustrated by Rosa Mia L. Pontillo
Is it safe to use a worn-out extension wire at home? Why?
Suggest 2 to 3 ways on how to keep your family members safe from the electrical hazard.
| Rubric for Scoring | |
|---|---|
| 2 points | Discussions are conceptually complete. |
| 1 point | Discussions are conceptually incomplete. |
| 0 | No discussion |
Assessment
Directions: Write True if the statement is correct and change the underlined word if the statement is false. Write your answers on a separate sheet of paper.
- Operating any appliances with a wet hand is unsafe.
- If you happen to touch with your bare hands an uninsulated wire, it is safe if it has low current.
- Blown out fuse can be replaced with a jumper wire.
- A circuit breaker automatically shuts down if there is overloading in the circuit.
- When the circuit breaker automatically shuts down, it is proper to reset it even without inspecting the conducting wire for any short circuit.
- Your washing machine and refrigerator should have proper earthing for safe operation.
- The refrigerator has double insulation that functions as a second layer to protect the user from electric shock.
- It is a good practice to connect the computer set to a voltage regulator to protect it from overloading.
- It is safe if a household line consumed 30 A of current even if its circuit breaker has only 20 A capacity.
- It is unsafe to consume 35 A of current if the fuse has only 30 A capacity.
- Grounded circuit happens when current takes a short cut to a zero-resistance conducting wire instead of passing through the load.
- Short circuit happens when a live wire is in direct contact with the metal casing of the appliances.
- Earthing protects the appliance user from the grounded appliances.
- Fuse and circuit breaker are safety devices that open the circuit when there is overloading.
- A fuse should be replaced immediately once it has blown up.
Additional Activities
Activity 6: House of Hazards
Directions: List down at least 8 electrical hazards in the pictures below. Write your answers on a separate sheet of paper.
[illustration: kitchen with a cord running across the counter and floor, a toaster or appliance near the sink, an ironing board with clothes, and a stove; a row of three smaller pictures below]
[illustration: a person touching a plugged-in appliance with a hand]
[illustration: an electrical wire running under a rug on the floor]
[illustration: a child reaching toward a wall electrical outlet]
Illustrated by Rosa Mia L. Pontillo
Answer Key
What I Know
- D
- C
- D
- C
- A
- D
- A
- D
- B
- D
- D
- C
- A
- B
- C
What’s In
Activity 1
| Resistance (Ω) | Current (A) | Voltage (V) |
|---|---|---|
| 1.0 | 12.0 | 12.0 |
| 0.5 | 24.0 | 12.0 |
| 0.25 | 48.0 | 12.0 |
| 0.125 | 56.0 | 12.0 |
| 0.062 | 112 | 12.0 |
| 0.031 | 224 | 12.0 |
| 0.016 | 448 | 12.0 |
| 0.008 | 896 | 12.0 |
| 0.004 | 1792 | 12.0 |
| 0.002 | 3584 | 12.0 |
- As resistance decreases, current increases.
- When resistance approaches zero, the amount of current becomes very large.
What’s New
Activity 2
- DS
- AP
- DP
- AS
- DP
Activity 3
- octopus connections
- substandard Christmas lights
- electrical misuse
- illegal connections/unauthorized connections
What’s More
Activity 4
Keywords
- Circuit
| Electrical Devices and Safety Measures | Check if found at home, otherwise mark X if not found at home. | Explain in your own simple words the function. (Keywords) |
|---|---|---|
| 1. Circuit breaker | a. when there is circuit overloading b. Shuts down automatically | |
| 2. Fuse | a. when there is circuit overloading b. automatically blows up | |
| 3. Automatic Voltage Regulator | supply constant amount of voltage | |
| 4. Uninterruptible Power Supply | provides emergency power in case of power interruption. | |
| 5. Earthing | a. grounded appliances. b. alternative route for excess amount current | |
| 6. Double insulation | a. when there is exposed wire within the circuit b. second layer protection is provided. |
What I Can Do
Activity 5
- No. Worn out wire has an electrical hazard and can short circuit.
- Possible answers:
a. use new extension cord
b. avoid octopus connection
c. directly replace worn out conducting wire
d. regularly check electrical connections at home
What I Have Learned
- Electric hazard/electric shock
- overloading
- fuse
- earth/ground
- touching/connecting/contacting
- zero
- grounded circuit
Assessment
- True
- unsafe
- cannot
- True
- improper
- True
- True
- True
- unsafe
- True
- Short circuit
- Ground circuit
- True
- True
- True
Additional Activities
Activity 6 (answers can be in any order)
- electrical wires pass through the water in the sink
- overuse of electrical appliances
- unused appliances plugged in the conventional outlet
- electrical outlet placed within the reach of the child
- child playing an electrical outlet
- multiple appliances plugged in a single outlet
- electrical wires improperly placed
- electrical wire passes under the rug or carpet
References:
Alvie J. Asuncion, et. al. 2017. “Energy Transfer in the Circuit” In Science 7 Learner’s Material, by Alvie J. Asuncion, et. al., 273-276. Pasig City , Philippines: FEP Printing Corporation.
Pia C. Ocampo, et. al. 2016. “Safety in Using Electricity” In Science 8 Learner’s Material, by Pia C. Ocampo, et.al., 64-68. Pasig City , Philippines: FEP Printing Corporation.
Eulalia N. Bentillo, et. al. 2012. “Short Circuit and Overload” In Physics Textbook, by Eulalia N. Bentillo, et. al., 171-174. Quezon City, Philippines: Book Media Press Inc. Mandaluyong City, Philippines: Printwell Inc.
Eulalia N. Bentillo, et. al. 2012. “Circuit Protector” In Physics Textbook, by Eulalia N. Bentillo, et. al., 174-177. Quezon City, Philippines: Book Media Press Inc. Mandaluyong City, Philippines: Printwell Inc.
Eulalia N. Bentillo, et. al. 2012. “Electric Current and Human Body” In Physics Textbook, by Eulalia N. Bentillo, et. al., 181-182. Quezon City, Philippines: Book Media Press Inc. Mandaluyong City, Philippines: Printwell Inc.
Eulalia N. Bentillo, et. al. 2012. “Electrical Hazard and Safety” In Physics Textbook, by Eulalia N. Bentillo, et. al., 182-186. Quezon City, Philippines: Book Media Press Inc. Mandaluyong City, Philippines: Printwell Inc.
Pixabay. “Car Battery Lead Storage-Free Vector Graphic on Pixabay.” Accessed May 19, 2020. https://pixabay.com/vectors/car-battery-battery-296788/
Pixabay. “Light Switch Plate Electric -Free Vector Graphic on Pixabay.” Accessed May 21, 2020. https://pixabay.com/vectors/light-switch-switch-plate-37017/
Pixabay. “Bulb Light Lamp-Free Vector Graphic on Pixabay.” Accessed May 22, 2020. https://pixabay.com/vectors/bulb-light-lamp-electric-160207/
For inquiries or feedback, please write or call:
Department of Education – Bureau of Learning Resources (DepEd-BLR)
Ground Floor, Bonifacio Bldg., DepEd Complex Meralco Avenue, Pasig City, Philippines 1600
Telefax: (632) 8634-1072; 8634-1054; 8631-4985
Email Address: blr.lrqad@deped.gov.ph * blr.lrpd@deped.gov.ph
Leave a Reply