This is Module 4 of Learning Strand 3, Mathematical and Problem-Solving Skills, under the ALS Accreditation and Equivalency Program for Junior High School. Titled “Recognizing Shapes and Measurements Around Me,” it is a self-paced geometry module for ALS learners. It covers points, lines, and planes, angles and how to measure them with a protractor, and polygons and their interior angles.
The module follows Miranda and her father, a carpenter, to show how everyday work like measuring, cutting boards, and laying floor tiles uses geometry. It was published in 2020 by UNESCO and the Department of Education.
On this page 7 sections
What learners will learn
The module lists these competencies, with the codes it prints:
- Represent point, line, and plane using concrete and pictorial models (LS3MP-G-PSC-JHS-17)
- Identify objects that represent point, line, and plane, such as paper, rope, farmland, wall, and ceiling (LS3MP-G-PSC-JHS-18)
- Illustrate subsets of a line (LS3MP-G-PSC-JHS-19)
- Determine the conditions under which lines and segments are parallel or perpendicular (LS3MP-G-PSC-JHS-20)
- Illustrate an angle (LS3MP-G-PSC-AE/JHS-21)
- Draw different types of angles found in objects used in daily life, such as right, acute, and obtuse angles (LS3MP-G-PSC-AE/JHS-22)
- Measure angles found in geometric shapes using a protractor (LS3MP-G-PSC-AE/JHS-23)
- Illustrate polygons: convexity, angles, and sides (LS3MP-G-PSC-JHS-38)
- Solve problems involving sides and angles of a polygon (LS3MP-G-PSC-JHS-40)
- Apply the principles of geometric shapes in daily life situations (LS3MP-G-PSC-BL/LE/AE/JHS-7)
Lessons in this module
- The Foundations of Shapes and Figures. Using two sticks, a sheet of paper, and a box, learners discover points, lines, planes, line segments, rays, intersections, and parallel and perpendicular lines.
- How Open Is It? Learners use a protractor to measure and draw angles. They learn the types of angles, adjacent angles, and complementary and supplementary angles.
- Many Angles. Using the floor tiles Miranda’s father lays, learners name polygons by their number of sides. They tell convex from concave polygons and compute interior angles of regular polygons.
Key ideas: points, lines, planes, and angles
Undefined terms. Points, lines, and planes are the basic figures of geometry:
- A point is a location in space, shown by a dot. It has no length or width.
- A line is a straight path of points that extends in both directions without end. You can name it by any two of its points, such as line FE or EF.
- A plane is an endless flat surface, such as a large field, the surface of the ocean, or a high wall. A sheet of paper is a small piece of a plane.
Subsets of a line.
- A line segment has two endpoints. The sides of a paper and the edges of a box are examples.
- A ray has one endpoint and extends in one direction. You name it with the endpoint first.
Intersections. Two lines meet at a point. Two planes meet at a line, the way two faces of a box meet at an edge.
Perpendicular and parallel lines.
- Perpendicular lines (symbol ⊥) meet at a right angle. Examples are the corners of windows, rooms, and picture frames.
- Parallel lines (symbol ∥) never meet, even when extended. Examples are railroads, highways, electric cables, and pedestrian crossing lines.
Angles. An angle is made of two rays that share an endpoint called the vertex. It is measured in degrees. To measure one, line up the vertex with the center of the protractor and the initial side with its horizontal edge. Then read where the terminal side falls.
| Type of angle | Measure |
|---|---|
| Acute | greater than 0° but less than 90° |
| Right | exactly 90° |
| Obtuse | greater than 90° but less than 180° |
| Straight | exactly 180° |
| Reflex | greater than 180° but less than 360° |
| Full | exactly 360° |
Complementary angles add up to 90°. For example, the complement of 62° is 90° − 62° = 28°. Supplementary angles add up to 180°. For example, the supplement of 118° is 180° − 118° = 62°. Adjacent angles share a vertex and a common side.
Key ideas: polygons
A polygon is a closed plane figure formed by straight lines. It is convex if no segment joining two of its vertices lies outside it; otherwise it is concave. Polygons are named by their number of sides:
- 3 sides: triangle
- 4 sides: quadrilateral
- 5 sides: pentagon
- 6 sides: hexagon
- 7 sides: heptagon
- 8 sides: octagon
- 9 sides: nonagon
- 10 sides: decagon
- 11 sides: undecagon or hendecagon
- 12 sides: dodecagon
A polygon with n sides can also be called an n-gon, for example a 16-gon.
There are three special kinds:
- An equilateral polygon has all sides equal.
- An equiangular polygon has all angles equal.
- A regular polygon is both.
For a regular polygon with n sides:
- Each interior angle: A = 180(n − 2) ÷ n
- Sum of the interior angles: S = 180(n − 2)
| Regular polygon | Each interior angle | Sum of interior angles |
|---|---|---|
| Triangle | 60° | 180° |
| Quadrilateral | 90° | 360° |
| Pentagon | 108° | 540° |
| Hexagon | 120° | 720° |
| Octagon | 135° | 1080° |
| Decagon | 144° | 1440° |
The module ends with word problems on real objects: a jewelry box shaped like a regular 15-gon, a coin shaped like a regular undecagon, and a trampoline shaped like a regular dodecagon.
How to use this module
Each lesson follows the same parts:
- Setting the Path: the lesson goals
- Trying This Out: a hands-on activity
- Understanding What You Did: the discussion
- Sharpening Your Skills: practice
- Treading the Road to Mastery: a mastery task
After the three lessons come these parts:
- Don’t Forget: a summary
- Explore More: extra study materials
- Reach the Top: a 15-item final test
- Answer Key
- Glossary
For learners: Start with the 15-item Pre-assessment. If you get everything right, the module says you may skip it. Write all answers on a separate sheet of paper, not on the module, and read each instruction carefully. Finish one task before moving to the next, and check your work honestly with the Answer Key. For the angle lessons, have a protractor ready; the module includes a sample protractor you can trace.
For parents and household members: Lesson 1 needs two sticks, a clean sheet of paper, and a box. Helping your learner find shapes and angles at home, like a door opening or the hands of a clock, matches the module’s own examples.
For ALS teachers and learning facilitators: Learners are asked to return the module to you when they finish. They are also told to consult you if they have difficulty. The Reach the Top test can serve as a check of mastery.
Frequently asked questions
Who is this ALS Module 4 for?
It is for learners in the ALS Accreditation and Equivalency Program at the Junior High School level. It belongs to Learning Strand 3, Mathematical and Problem-Solving Skills.
What lessons are in Recognizing Shapes and Measurements Around Me?
There are three lessons. They are The Foundations of Shapes and Figures, How Open Is It?, and Many Angles. Together they cover points, lines, and planes; angles and protractors; and polygons.
Does the module have an answer key?
Yes. The Answer Key at the end has answers for the Pre-assessment, every lesson activity, and the Reach the Top final test.
How do you find each interior angle of a regular polygon?
Use A = 180(n − 2) ÷ n, where n is the number of sides. For example, a regular hexagon has 180(4) ÷ 6 = 120° per angle. The sum of all interior angles is S = 180(n − 2).
What is the difference between complementary and supplementary angles?
Complementary angles add up to 90°, while supplementary angles add up to 180°. For example, the complement of 62° is 28°, and the supplement of 118° is 62°.
Full text of the module
The text below is a transcription of the PDF above, as printed.
Learning Strand 3 Mathematical & Problem-Solving Skills – Module 4: Recognizing Shapes and Measurement Around Me
SECONDARY JHS
LEARNING STRAND 3 MATHEMATICAL & PROBLEM-SOLVING SKILLS
MODULE 4: RECOGNIZING SHAPES AND MEASUREMENT AROUND ME
ALS Accreditation and Equivalency Program: Junior High School
GOVERNMENT PROPERTY NOT FOR SALE
[illustration: colorful red-and-white illustration of math items including numbers 1, 2, 5, 8, plus/multiply/minus/divide symbols, a cylinder, a funnel-like cone, a square root sign, x + y, pencils, a compass, a protractor, a set square, and a calculator showing digits and operators]
LEARNING STRAND 3
RECOGNIZING SHAPES AND MEASUREMENTS AROUND ME
[illustration: icon of a head with a math symbols inside (2, ÷, √, x)]
MATHEMATICAL AND PROBLEM-SOLVING SKILLS MODULE 4
ALS Accreditation and Equivalency Program: Junior High School Learning Strand 3: Mathematical and Problem-Solving Skills Module 4: Recognizing Shapes and Measurements Around Me
Published in 2020 by the United Nations Educational, Scientific and Cultural Organization UNESCO Office, Jakarta Jalan Galuh II No. 5, Kebayoran Baru, Jakarta, Indonesia
and
Department of Education DepEd Complex, Meralco Avenue, Pasig City, Philippines
Copyright © UNESCO and DepEd 2020
This publication is available in Open Access under the Attribution-Share Alike 3.0 IGO (CC-BY-SA) 3.0 IGO) license (http://creativecommons.org/licenses/by-sa/3.0/igo/). By using the content of this publication, the users accept to be bound by the terms of use of the UNESCO Open Access Repository (http://www.unesco.org/open-access/terms-use-ccbysa-en).
The designations employed and the presentation of material throughout this publication do not imply the expression of any opinion whatsoever on the part of UNESCO concerning the legal status of any country, territory, city or area or of its authorities, or concerning the delimitation of its frontiers or boundaries.
The selection and presentation of the material contained in this publication, as well as the opinions expressed herein are the sole responsibility of the authors and not necessarily those of UNESCO, nor do they commit the organization in any way.
This educational resource material was developed and printed through the project “Better Life for Out-of-School Girls to Fight Against Poverty and Injustice in the Philippines” with financial support from Korea International Cooperation Agency (KOICA).
Printed by APC Printers Corporation Printed in Makati City, Philippines
ISBN 888-888-8888-88-8
DEVELOPMENT TEAM
| Name | Position |
|---|---|
| Jenelyn Marasigan Baylon | Master Teacher I, ALS Task Force (On-detail) |
| Kristine Lee S. Lumanog | Education Program Specialist II, ALS Task Force (On-detail) |
| Judy R. Mendoza | Project Development Officer III, Bureau of Learning Resources |
| Reyangie V. Sandoval | Education Program Specialist II, Bureau of Learning Resources |
| Josephine C. Intino | Senior Education Program Specialist, Bureau of Curriculum Development |
| Eric U. Labre | Senior Education Program Specialist, Bureau of Learning Resources |
| Roderick P. Corpuz | Supervising Education Program Specialist, ALS Task Force |
| Daisy Asuncion O. Santos | Chief Education Program Specialist, Bureau of Learning Resources |
| Marilette R. Almayda | Director III/Head, ALS Task Force |
| Ariz Delson Acay D. Cawilan | Officer-In-Charge, Office of the Director IV, Bureau of Learning Resources |
| G. H. S. Ambat | Assistant Secretary for Alternative Learning System Program and Task Force |
| Tonisito M. C. Umali | Undersecretary for Legislative Liaison Office, External Partnership Service and Project Management Service |
| Leonor Magtolis Briones | Secretary |
| Name | Position |
|---|---|
| Ermil P. Gabuat | Author |
| Ramonette Ruzgal | Content Expert |
| Bernadette Sison | Admin and Finance Staff |
| Mildred Parbo | Project Lead |
| Ma. Teresita Medado | President |
Content and Language Evaluators and Instructional Design Reviewer
| Name | Position |
|---|---|
| Marilyn E. Macababbad | Schools Division Office of Biñan City, Department of Education |
| Lourdes A. Navarro | Regional Office XI – Davao, Department of Education |
| Ivy S. Yasis | Freelance Language Editor |
| Name | Position |
|---|---|
| Ade Sandra | Admin and Finance Assistant |
| Rusyda Djamhur | Project Assistant |
| Marmon Abutas Pagunsan | National Project Consultant |
| Remegio Alquitran | National Project Officer |
| Maria Karisma Bea Agarao | National Programme Coordinator |
| Mee Young Choi | Head of Education Unit |
| Shahbaz Khan | Director and Representative |
User’s Guide
For the ALS Learner:
Welcome to this Module entitled Recognizing Shapes and Measurements Around Me under Learning Strand 3 Mathematical and Problem-Solving Skills of the ALS K to 12 Basic Education (BEC).
This module was designed to provide you with fun and meaningful opportunities for guided and independent learning at your own pace and time. You will be enabled to process the contents of the learning resource while being an active learner.
This module has the following parts and corresponding icons:
| Icon | Part | Description |
|---|---|---|
| [icon] | Let’s Get to Know | This will give you an idea of the skills or competencies you are expected to learn in the module. |
| [icon] | Pre-assessment | This part includes an activity that aims to check what you already know about the lesson. If you get all the answers correct (100%), you may decide to skip this module. |
| [icon] | Setting the Path | This section provides a brief discussion of the lesson. This aims to help you discover and understand new concepts and skills. |
| [icon] | Trying This Out | This comprises activities for independent practice to solidify your understanding and skills of the topic. You may check the answers to the exercises using the Answer Key at the end of the module. |
| [icon] | Understanding What You Did | This includes questions that process what you learned from the lesson. |
| [icon] | Sharpening Your Skills | This section provides an activity that will help you transfer your new knowledge or skill in real-life situations or concerns. |
| [icon] | Treading the Road to Mastery | This is a task which aims to evaluate your level of mastery in achieving the given learning competency. |
| [icon] | Don’t Forget | This part serves as a summary of the lessons in the module. |
| [icon] | Explore More | In this portion, another activity will be given to you to enrich your knowledge or skill of the lesson learned. This also tends retention of learned concepts. |
| [icon] | Reach the Top | This part will assess your level of mastery in achieving the learning competencies in each lesson in the module. |
| Answer Key | This contains answers to all activities in the module. | |
| Glossary | This portion gives information about the meanings of the specialized words used in the module. |
At the end of this module you will also find:
| Part | Description |
|---|---|
| References | This is a list of all sources used in developing this module. |
The following are some reminders in using this module:
- Use the module with care. Do not put unnecessary mark/s on any part of the module. Use a separate sheet of paper in answering the exercises.
- Don’t forget to answer the Pre-assessment before moving on to the other activities included in the module.
- Read the instruction carefully before doing each task.
- Observe honesty and integrity in doing the tasks and checking your answers.
- Finish the task at hand before proceeding to the next.
- Return this module to your ALS Teacher/Instructional Manager/Learning Facilitator once you are through with it.
If you encounter any difficulty in answering the tasks in this module, do not hesitate to consult your ALS Teacher/Instructional Manager/Learning Facilitator. Always bear in mind that you are not alone.
We hope that through this material, you will experience meaningful learning and gain deep understanding of the relevant competencies. You can do it!
Contents
| Section | Page |
|---|---|
| Let’s Get to Know | 1 |
| Pre-Assessment | 2 |
| LESSON 1: The Foundation of Shapes & Figures | 4 |
| Setting the Path | 4 |
| Trying This Out | 5 |
| Understanding What You Did | 6 |
| Sharpening Your Skills | 17 |
| Treading the Road to Mastery | 21 |
| LESSON 2: How Open is It? | 21 |
| Setting the Path | 21 |
| Trying This Out | 22 |
| Understanding What You Did | 25 |
| Sharpening Your Skills | 31 |
| Treading the Road to Mastery | 33 |
| LESSON 3: Many Angles | 34 |
| Setting the Path | 34 |
| Trying This Out | 35 |
| Understanding What You Did | 36 |
| Sharpening Your Skills | 44 |
| Treading the Road to Mastery | 46 |
Contents
Don’t Forget 47
Explore More 52
Reach the Top 53
Answer Key 56
Glossary 61
References 65
MODULE 4
LET’S GET TO KNOW
Miranda thinks very highly of her father who is a carpenter. She dreams that someday she could be as good as him. She believes that her father is very knowledgeable with numbers because of his ability to measure, but her father humbly says that he is not.
[illustration: Miranda with her hand on her chin, thinking; two thought bubbles show her father measuring with a tape measure and her father sawing a board on a table]
Miranda needs your help in explaining to her father that carpenters are great with numbers in their own way.
MODULE 5
PRE-ASSESSMENT
Choose the letter of the correct answer. Write your answers on a separate sheet of paper.
What is the best term that describes two lines that will never meet?
- a. perpendicular
- b. parallel
- c. intersecting
- d. adjacent
What do you call the figure that extends in both directions without end?
- a. line segment
- b. ray
- c. point
- d. line
What kind of lines form right angles?
- a. intersecting
- b. adjacent
- c. perpendicular
- d. parallel
It refers to an exact location in space.
- a. line
- b. plane
- c. point
- d. angle
What shape represents a paper in geometry?
- a. point
- b. angle
- c. line
- d. plane
What is the intersection of two lines?
- a. plane
- b. line
- c. point
- d. ray
In the figure on the right, which segments are parallel?
- a. OV and VE
- b. OV and LE
- c. LO and VE
- d. LO and LE
[chart: geometric figure; trapezoid with vertices O and V at the top and L and E at the bottom]
Which of the following is a right angle?
- a. [illustration: angle labeled 45°]
- b. [illustration: angle labeled 90°]
- c. [illustration: angle labeled 120°]
- D. [illustration: angle labeled 72°]
What is the sum of two complementary angles?
- a. 360°
- b. 270°
- c. 180°
- d. 90°
What is the supplement of 110°?
- a. 70°
- b. 55°
- c. 45°
- d. 20°
- It refers to a closed plane figure formed by straight lines.
- a. polygon
- b. angle
- c. ray
- d. point
- What is the name of the polygon with 8 sides?
- a. triangle
- b. pentagon
- c. octagon
- d. nonagon
- What is the sum of the measures of the interior angles of a quadrilateral?
- a. 180°
- b. 360°
- c. 540°
- d. 720°
- What is the measure of each interior angle of a regular pentagon?
- a. 108°
- b. 90°
- c. 72°
- d. 60°
- How many sides does a decagon have?
- a. 10
- b. 9
- c. 8
- d. 7
Lesson 1
Setting the Path
The Foundations of Shapes and Figures
At the end of this lesson, you will be able to:
- represent point, line, and plane using concrete and pictorial models (LS3MP-G-PSC-JHS-17);
- identify objects that represent point, line, and place such as paper, rope, farmland, wall, ceiling, etc. (LS3MP-G-PSC-JHS-18);
- illustrate subsets of a line (LS3MP-G-PSC-JHS-19); and
- determine the conditions under which lines and segments are parallel or perpendicular (LS3MP-G-PSC-JHS-20).
Trying This Out
Let us learn by doing. Try to do this with your friends. Get two pieces of sticks, a piece of clean paper, and a box. Let us observe figures that we see every day but do not know how they are called. Write your answers on a separate sheet of paper.
Preliminary
- Put one stick on the piece of paper. Then, use the stick as a guide to mark three dots on the paper as shown on the figure on the right. Name them using A, B, and C, respectively.
[illustration: a straight stick drawn across a rectangle with three dots labeled A, B, and C on it]
[illustration: a rectangle with three dots labeled A, B, and C not on a line]
- Mark a fourth dot on the paper away from the first three and name it D.
[illustration: a rectangle with four dots labeled A, B, C, and D]
Just so we are on the same page before the activity, let us name the figures so we will not be confused in differentiating them.
- We will call each location on the piece of paper as a point. We have four points on the paper, Point A, Point B, Point C, and Point D.
- We will call the stick that connects two points as a segment of a line.
- We will call the paper that is a flat surface containing the points and the line as a plane.
Let us investigate.
- STICKS: Mark the ends of the sticks as L and I, and N and E as shown in the figure below.
[illustration: two separate sticks, one with ends labeled L and I, the other with ends labeled N and E]
We will name these two sticks using the points they are connecting. We have two lines line LI and line EN. Now, try to cross lines LI and EN with each other by putting one on top of the other.
[illustration: lines LI and EN crossing each other, with endpoints labeled L, I, N, and E]
What do we call the figure where these two lines meet?
- PAPER: Mark the corners of the paper using the letters J, K, L, and M as shown in the figure (see next page). We will name the piece of paper using the letters we wrote on each corner points. So, we name this as Plane JKLM.
See the figure on the next page.
[transcriber’s note: the figure referred to as “the next page” is not on this page or in the pages provided]
[illustration: rectangle with corners labeled J (top left), K (top right), L (bottom right), and M (bottom left), inside a dashed border]
Question 2
A. What figure represents each side of the paper? B. What figures meet at the following points?
- Point J – Point K – Point L – Point M
C. What pairs of sides in the paper are across each other? D. Imagine extending the sides of the paper in all direction. Will the sides of the papers cross each other?
[illustration: the same rectangle JKLM with dashed extension lines drawn past each corner]
- BOX: Now, look at the box and answer the questions using your observations.
[illustration: rectangular box with the labels “face” on the front face and “edge” on the right-side edge]
Question 3
A. What figure represents the edges of the box? B. What figure represents the faces of the box? C. What relationship exists between the faces and the edges of the box?
Lesson 1
Understanding What You Did
Let us discuss all the things that you were able to observe.
UNDEFINED TERMS
Points, lines, and planes are called the undefined terms in geometry and are the basic figures that make up other more complex and difficult shapes and objects.
- A point is a representation of any location in space. It is usually represented by a dot ( . ) that has no dimensions (length or width). This is the same as the dots you made on the piece of paper.
[illustration: four dots labeled A, B, C, and D placed at different positions]
TRY IT! Make a dot on any piece of paper. Can you measure its length or width? It is too small to measure, so we say that it has no dimensions.
- A line in geometry is a straight path made up of a group of points that extend to both directions without end (represented by the arrow heads).
[illustration: a line with arrowheads at both ends]
The stick we used in the activity can be imagined as a small piece of an unending line. We can use a string or thread that is stretched as a representation of an unending line. Remember that we can connect any two points to form a line.
[illustration: spool of thread]
TRY IT! Make three different dots in different positions. How many lines can you make when you connect two points at a time?
We can name a line using any two points in it.
[illustration: a line with points F and E on it, arrowhead at the right end and at the left end, with F at the left]
This can be named as line FE or EF.
[illustration: a line with points G, H, and I on it, with arrowheads at both ends]
This can be named as line GH, HI, or GI.
- A plane in geometry is an endless and boundless flat surface. It is usually represented as a rectangular space, like the paper we used, but this is just a piece of a plane.
A plane is named using any three or four points on the plane.
[illustration: rectangle representing a plane]
[illustration: parallelogram labeled “Plane” with arrows pointing outward in four directions]
Answer to Question 3(B)
The faces of a box can be represented as planes.
A plane is made up of several lines on its surface.
[illustration: parallelogram containing three horizontal arrowed lines]
[illustration: parallelogram containing several slanted arrowed lines]
Examples of plane include a very large field, the surface of the ocean, and a high wall.
[illustration: rice field with a hut under a sun]
[illustration: shoreline with hills, a palm tree, and waves]
SUBSETS OF A LINE
- A line segment is a part of a line that has two end points. This means it cannot extend on either side. Imagine a line being cut at both points A and B, as shown below.
[illustration: line with arrowheads at both ends, cut with scissors at points A and B, leaving segment AB]
In symbols, we write this segment as AB which can be read as “line segment AB”.
Answer to Question 2(A)
The sides of a paper can be represented as line segments.
Answer to Question 3(A)
The edges of the box can be represented as line segments.
- A ray is a part of a line that has only one endpoint. It only extends on one side. Imagine a line being cut at one point.
[illustration: line with arrowheads at both ends, cut with scissors at point A, leaving ray AB with an arrowhead at the right end]
In symbols, we write this ray as AB which can be read as “ray AB”.
To name a ray, we write the endpoint first, followed by any point on the ray and an arrow on top as written above.
[illustration: ray with points Y and X, arrowhead on the left]
Ray YX or YX
[illustration: ray with points M and N, arrowhead on the upper right]
Ray MN or MN
To name a line segment, we use the two endpoints with a bar at the top, as written on page 11.
Intersection of Lines and Planes
INTERSECTION OF LINES AND PLANES
Intersection is where two geometric figures meet.
- The intersection of two lines is a point.
[illustration: two intersecting lines labeled N, L, I, and E, with an arrow labeled “point” pointing to their meeting point]
Answer to Question 1
The intersection of the two sticks can be represented with a point.
[illustration: rice field with a small circle marking an intersection of paths]
[illustration: two crossing sticks with an arrow labeled “INTERSECTION” pointing to where they cross]
A rice field is an example of an illustration showing intersections. In the given picture, how many points of intersection do you see?
- The intersection of two planes is a line.
[chart: box diagram; labels “Plane 1” (top face) and “Plane 2” (front face)]
Look at your box. Planes 1 and 2 meet at an edge represented by a line segment. Each face is represented by a plane.
Answer to Question 3(C)
The edges of the box is where the faces of the box meet.
Think of the corners of windows, of a room, and of picture frames.
PERPENDICULAR AND PARALLEL LINES
- Perpendicular lines are lines that intersect each other at a right angle. A small box in the point of intersection indicate that the lines are perpendicular.
[illustration: a horizontal line and a vertical line meeting at a right angle, marked with a small square]
[illustration: two crossing lines meeting at a right angle, marked with a small square]
Think of the corners of windows, of a room, and of picture frames.
[illustration: room interior with a plant, a framed picture, a window with an awning, and a potted tree, with circles highlighting three corners where the walls, ceiling, and floor meet]
Lesson 1
Answer to Question 2(B)
We can observe that two lines meet at each point of every corner.
a. At point J, lines JK and JM meet. b. At point K, lines JK and KL meet. c. At point L, lines KL and LM meet. d. At point M, lines JM and LM meet.
The lines meeting at each corner of the paper are all perpendicular to each other. Perpendicularity is symbolized by “⊥”.
Using the lines on the paper, we can write each pair of perpendicular lines as:
JK ⊥ JM (JK is perpendicular to JM)
JK ⊥ KL (JK is perpendicular to KL)
KL ⊥ LM (KL is perpendicular to LM)
JM ⊥ LM (JM is perpendicular to LM)
Parallel lines are lines that will never intersect even if we extend them without end or limit. Imagine if you and your crush are walking on an endless road across each other on opposite sides of the road, heading towards the same direction. You will never meet no matter how far you travel. This is how parallel lines work.
Think of highways, railroads (MRT or PNR trains), electric cables, and pedestrian crossing lines.
Parallel lines use tick marks (arrows on the line) that indicate that they are parallel.
[illustration: electric cables strung between three utility poles, shown as parallel lines]
Lesson 1
Examples of parallel lines:
[illustration: two pairs of parallel lines with arrowheads; one pair horizontal, one pair slanted]
Answer to Question 2(C)
The sides of the paper that are across each other are the pairs JK and LM, and JM and KL.
Answer to Question 2(D)
Perpendicular sides cross at the corner of the paper.
[chart: diagram; rectangle with corners labeled J (top left), K (top right), L (bottom right), and M (bottom left), with dashed lines extending from each side]
The pairs of lines across each other on the paper are parallel to one another. Parallelism is symbolized by “∥”.
Using the lines on the paper, we can write each pair of parallel lines as:
- JK ∥ LM (JK is parallel to LM)
- JM ∥ KL (JM is parallel to KL)
Sharpening Your Skills
Write your answers on a separate sheet of paper.
I. Identify the illustrated figure in each item and provide the correct name or description for each.
- [illustration: ray with endpoint C and a second labeled point S, arrowhead beyond S]
- [illustration: quadrilateral with vertices O, V, E, and L]
- [illustration: line with arrowheads at both ends and labeled points A and M]
- [illustration: two intersecting lines with labeled points P, R, T, and A and a right-angle mark at the intersection]
- [illustration: two parallel lines, the upper with labeled points C and R, the lower with labeled points A and T, both with arrowheads at both ends]
- [illustration: line segment with labeled endpoints P and R]
II. Draw the given figure.
- Ray DU
- Plane INUT
- Line Segment TS
- Line IL
Identify the Lines That Are Perpendicular or Parallel
III. Identify the lines that are perpendicular or parallel to each other.
[illustration: diagram of several labeled lines with arrowheads and right-angle marks; labeled points Z, Y, X, W, V, S, U, T, R, P, M, and N]
[transcriber’s note: the text layer of this page also contains loose letter fragments (C, R, A, T, P, R, L, E, O, V, A, M, P, A, R, T) that are not visible on the page image and were not transcribed]
Treading the Road to Mastery
Directions. Name the intersection of each given pair of figures. Do this activity on a separate sheet of paper.
[illustration: two horizontal arrowed lines crossed by two slanted arrowed lines meeting at point C; labeled points E, D, A, B]
- A. DE and CE
- B. DC and AB
- C. EC and AB
- D. ED and AB
[illustration: lines labeled ℓ, m, and n with labeled points A, B, F, D, E, and C]
- A. Line ℓ and n
- B. Line n and m
- C. Line ℓ and m
[illustration: two vertical planes labeled X and Z, meeting a horizontal plane labeled Y along lines p and q]
- A. Plane X and Z
- B. Plane X and Y
- C. Plane Y and Z
[illustration: plane labeled S with a vertical line labeled b and a horizontal line labeled a; labeled points K, F, Q, W, D, and P; plane labeled P]
- A. Plane S and P
- B. Line a and b
[illustration: two intersecting planes labeled S and R with lines through the intersection; labeled points Q, N, L, J, K, M, and P]
- A. Line QP and KL
- B. Line MN and KL
- C. Line QP and MN
- D. Plane R and S
Lesson 2: Setting the Path
How Open Is It?
At the end of this lesson, you will be able to:
- illustrate an angle (LS3MP-G-PSC-AE/JHS-21);
- draw different types of angles found in the objects used in daily life, e.g., right angles, acute angles, obtuse angles (LS3MP-G-PSC-AE/JHS-22); and
- measure angles found in geometric shapes using a protractor (LS3MP-G-PSC-AE/JHS-23).
Trying This Out
Miranda asked her father to teach her how to use a protractor which is a tool for measuring angles. Let us learn how to use one, too, by following the instructions given by Miranda’s father. Below is a sample protractor that you may trace if you don’t have one.
[illustration: semicircular protractor with inner and outer degree scales from 0 to 180 on both sides]
- Suppose we want to measure angles such as the given figure below.
- A. Refer to the figure to see the names of each part of the angles.
[illustration: angle with its vertex at the bottom left, a horizontal initial side, and a slanted terminal side; labeled “Vertex”, “Initial Side”, and “Terminal Side”]
- B. Make sure that the vertex is aligned to the center of the protractor and the initial side is aligned to the horizontal length of the protractor.
C. Then, carefully read at which measure the terminal side is aligned. Read the measurement from zero (numbers in the lower group).
[illustration: protractor with an angle drawn from its center; caption: “Vertex aligned to center and initial side aligned to the horizontal length of protractor”]
[illustration: enlarged view of the protractor scale where the terminal side crosses the scale]
We see that the terminal side aligns with 80. Therefore, the measure of the angle is 80°.
Try measuring some of the angles as practice.
A. [illustration: angle with its initial side horizontal]
B. [illustration: angle with a steep terminal side]
C. [illustration: obtuse angle with its initial side horizontal]
You can also use the protractor to create your own angle based on their measurement. Supposed we want to draw an angle of measure 45°, let us learn how to do it with our protractor by following these steps.
[illustration: protractor with its vertex at the center and the horizontal line drawn]
- Start by drawing the vertex and terminal side by tracing a straight line from the center of the protractor along its horizontal length.
[illustration: protractor with a dashed line from the center to the point marked at 45]
Mark the point aligned with the measure you want. In this case, 45.
Then, trace the terminal side by drawing a straight line from the vertex to the point we made using the protractor.
Therefore, the angle that measures 45° looks like this, with correct label.
[illustration: 45° angle with arrows on both sides; label: 45°]
Lesson 1: Understanding What You Did
An angle is a union of two rays that share a common point called vertex. The angle is symbolized by “∠”. The angle is the measurement of the opening created by the rays.
We name the angle using the three points on the angle with the vertex always in the middle. The angle below is named ∠ABC or ∠CBA.
[illustration: angle with points A, B, C; vertex B; label: ∠ ABC = 60°]
The measurement of an angle uses the unit of degrees ( ° ).
Examples:
[illustration: angle with points M, N, O; vertex N; label: 120°; labels below: m∠ONM=120° and “measure of ONM”]
[illustration: angle with points P, Q, R; vertex Q; label: 30°; labels below: m∠PQR=30° and “measure of PQR”]
Adjacent angles are pairs of angles that share the same vertex and a common side. In other words, these are angles that are side-by-side.
[illustration: angle figure with points C, B, A, and vertex O; caption box: ∠COB and ∠BOA are adjacent angles; ✓ Common vertex at point O; ✓ Common side is ray OB]
Other examples:
[illustration: two adjacent angles labeled 30° and 60°]
[illustration: two adjacent angles labeled 120° and 60°]
[illustration: two adjacent angles labeled 80° and 20°]
BEWARE! The following are NOT adjacent angles:
[illustration: two angles sharing no common side; caption: DOES NOT SHARE A COMMON SIDE]
[illustration: two angles sharing no common vertex; caption: DOES NOT SHARE A COMMON VERTEX]
[illustration: two overlapping angles; caption: OVERLAPPING ANGLES]
TYPES OF ANGLES
Angles have different names depending on their measurement.
[illustration: right angle with vertex and small square; label: 90°; label: Vertex]
Right angle has a measure that is exactly 90°. Perpendicular lines that we learned in Lesson 1 form a right angle.
A right angle is symbolized by a small square in the figure.
[illustration: acute angle with vertex; label: 46°; label: Vertex]
- Acute angle has a measure greater than 0° but less than 90°.
[illustration: obtuse angle with vertex; label: 130 °; label: Vertex]
- Obtuse angle has a measure greater than 90° but less than 180°.
[illustration: reflex angle; label: 308°]
- Reflex angle has a measure greater than 180° but less than 360°.
[illustration: straight angle with vertex; label: 180°; label: Vertex]
- Straight angle is an angle that has a measure of exactly 180°. This type of angle looks like a straight line.
[illustration: full angle drawn as a circle with a radius; label: 360°]
- A full angle looks like a circle and has an angle measure of 360°.
Some examples of angles are the space created by the hands of a clock, space under the stairs, or the space created when opening a door.
[illustration: staircase with a open door, a wall clock, and the space under the stairs outlined as an angle]
COMPLEMENTARY AND SUPPLEMENTARY ANGLES
Complementary angles are pairs of angles whose measurements add up to 90°.
[illustration: angle with label 27°]
[illustration: angle with label 63°]
[illustration: angle with label 52°, and an angle with label 38° sharing the same vertex]
Example: Find the measure of the complement of the given angle with measure 62° in the given figure below:
[illustration: right angle split by a ray; unknown angle labeled x; other angle labeled 62°]
Complementary angles add up to 90°.
Using x as the missing measure: x + 62° = 90° x = 90° – 62° x = 28°
Supplementary angles are pairs of angles whose measurements add up to 180°.
[illustration: angle with label 60°]
[illustration: angle with label 120°]
[illustration: straight line with a ray; angles labeled 128° and 52°]
Example: Find the measure of the supplement of the given angle that measures 118° in the given figure below:
[illustration: straight line with a ray; angle labeled 118°; unknown angle labeled x]
Supplementary angles add up to 180°.
Using x as the missing measure: x + 118° = 180° x = 180° – 118° x = 62°
Lesson 2: Sharpening Your Skills
Write your answers on a separate sheet of paper.
I. Identify the type of angle that is given in each item.
- [illustration: angle labeled 170°]
- [illustration: angle labeled 335°]
- [illustration: angle labeled 85°]
- [illustration: right angle, marked with a square]
- [illustration: angle labeled 230°]
- [illustration: right angle, marked with a square]
- [illustration: angle labeled 275°]
- [illustration: angle labeled 25°]
Lesson 2
II. Use a protractor to create the indicated angle.
- 80°
- 135°
- 210°
- 55°
- Adjacent angles 45° and 60°
- Adjacent angles 72° and 18°
Lesson 2: Treading the Road to Mastery
Directions: Use a protractor to measure the angle then find its complement or supplement. Do this activity on a separate sheet of paaper.
Complement
- [illustration: angle with a dashed arc showing its complement]
- [illustration: angle with a dashed arc showing its complement]
- [illustration: angle with a dashed arc showing its complement]
Supplement
- [illustration: angle with a dashed arc showing its supplement]
- [illustration: angle with a dashed arc showing its supplement]
- [illustration: angle with a dashed arc showing its supplement]
Lesson 3: Setting the Path
Many Angles
At the end of the lesson, you will be able to:
- illustrate polygons: (a) convexity, (b) angles, and (c) sides (LS3MP-G-PSC-JHS-38);
- solve problems involving sides and angles of a polygon (LS3MP-G-PSC-JHS-40); and
- apply the principles of geometric shapes in daily life situations (LS3MP-G-PSC-BL/LE/AE/JHS-7).
Lesson 3: Trying This Out
Miranda went with her father one day while he was laying tiles on a house they recently constructed. She was amazed with all the different shapes put together to form a beautiful floor. Miranda wondered what the names for these shapes and figures are. Let us help her discover.
[illustration: a man laying tiles on a floor, with loose hexagon and triangle tiles around him]
Copy the sketches that Miranda made from the figures created by the tiles on a clean sheet of paper and fill up the following table.
How many corners does each tile have?
| FIGURE | CORNERS | FIGURE | CORNERS |
|---|---|---|---|
| [illustration: triangle] | [illustration: rectangle] | ||
| [illustration: pentagon] | [illustration: hexagon] | ||
| [illustration: heptagon] | [illustration: octagon] |
Lesson 3: Understanding What You Did
A plane figure is a figure that lies in a plane. From the activity, you were able to discover different plane figures, more specifically, polygons.
A polygon is a closed plane figure that is formed by straight lines. Polygons have sides and vertices.
[chart: polygon diagram; labels: B, A, C, E, D, “side” (pointing to the segment between B and C), “vertex” (pointing to E)]
Polygons are named by listing the vertices in consecutive order. For the polygon above, it can be called polygon ABCDE, CDEAB or BCDEA.
Convex and Concave Polygons
A polygon is convex if all line segments connecting any pair of vertices do not lie in the exterior of the polygon. A polygon that is not convex is called concave.
[illustration: convex polygon, a trapezoid with dashed extension lines] convex polygon
[illustration: concave polygon, with a dashed line segment labeled “lies in the exterior”] concave polygon
Lesson 3
Polygons According to Sides and Angles
We can classify polygons according to the number of sides and measure of interior angles.
Observe that all the polygons in the activity are convex.
Example 1. Classify the given polygon as convex or concave.
a. [illustration: cross-shaped polygon] b. [illustration: slanted polygon with a pointed corner] c. [illustration: arrow-shaped figure with a curved bottom edge]
Only plane figure (b) is a convex polygon. Plane figure (a) is concave because connecting some pairs of vertices results to a line segment in the exterior of the polygon. Figure (c) is not a polygon because the bottom part is not a segment.
| NUMBER OF SIDES | TYPE OF POLYGON | ILLUSTRATION |
|---|---|---|
| 3 | TRIANGLE | [illustration: triangle] |
| 4 | QUADRILATERAL | [illustration: rectangle] |
<!– transcriber’s note: table continued from the previous page –>
| NUMBER OF SIDES | TYPE OF POLYGON | ILLUSTRATION |
|---|---|---|
| 5 | PENTAGON | [illustration: pentagon] |
| 6 | HEXAGON | [illustration: hexagon] |
| 7 | HEPTAGON | [illustration: heptagon] |
| 8 | OCTAGON | [illustration: octagon] |
| 9 | NONAGON | [illustration: nonagon] |
| 10 | DECAGON | [illustration: decagon] |
| 11 | UNDECAGON or HENDECAGON | [illustration: hendecagon] |
Lesson 3
| NUMBER OF SIDES | TYPE OF POLYGON | ILLUSTRATION |
|---|---|---|
| 12 | DODECAGON | [illustration: regular dodecagon outline] |
If a polygon has $n$ number of sides, we usually use the term $n$ – gon. For instance, a polygon with 16 sides is called a 16-gon.
Go back to the activity, try to name the figures that you have discovered.
If all sides of a polygon are congruent or have equal measures, then it is called an equilateral polygon. These are examples of equilateral polygons. The tick marks are used to show that the sides are congruent.
[illustration: triangle, rectangle, and hexagon with tick marks on their sides]
If all interior angles of a polygon are congruent or have equal measures, then it is called an equiangular polygon. These are examples of equiangular polygons. The small arcs are used to show that the angles have the same measure.
[illustration: triangle, rectangle, and hexagon with small arcs at their angles]
Lesson 3
A convex polygon that is both equilateral and equiangular is called a regular polygon. Observe in the regular polygon shown here that it has tick marks and small arcs. This shows that it is both equilateral and equiangular.
[illustration: regular pentagon with tick marks and small arcs]
Example 2. Classify each polygon below by the number of its sides and determine if it is equilateral, equiangular, or regular.
a. [illustration: hexagon with small arcs at its angles] b. [illustration: square with tick marks and small arcs] c. [illustration: triangle with tick marks on its sides]
In item (a), the polygon is a hexagon (with 6 sides) and is equiangular. In item (b), the polygon is a quadrilateral (with 4 sides) and is regular. In item (c), the polygon is a triangle (with 3 sides) and is equilateral.
The measure of interior angles of regular polygons can be computed using the formula:
$$A = \frac{180(n – 2)}{n}$$
and the sum of the measure of interior angles is given by
$$S = 180(n – 2)$$
where $n$ is the number of sides of the polygon.
Lesson 3
Example 3. For the given regular polygon, find the measure of each interior angle and the sum of the measures of the interior angles.
a. Regular triangle b. Regular quadrilateral c. Regular hexagon d. Regular octagon
We first identify the number of sides for each regular polygon and use the formulas mentioned above.
a. Since a triangle has 3 sides, $n = 3$.
$$A = \frac{180(n – 2)}{n} = \frac{180(3 – 2)}{3} = \frac{180(1)}{3} = \frac{180}{3} = 60$$
$$S = 180(n – 2) = 180(3 – 2) = 180(1) = 180$$
b. Since a quadrilateral has 4 sides, $n = 4$.
$$A = \frac{180(n – 2)}{n} = \frac{180(4 – 2)}{4} = \frac{180(2)}{4} = \frac{360}{4} = 90$$
$$S = 180(n – 2) = 180(4 – 2) = 180(2) = 360$$
c. Since a hexagon has 6 sides, $n = 6$.
$$A = \frac{180(n – 2)}{n} = \frac{180(6 – 2)}{6} = \frac{180(4)}{6} = \frac{720}{6} = 120$$
$$S = 180(n – 2) = 180(6 – 2) = 180(4) = 720$$
Lesson 3
d. Since an octagon has 8 sides, $n = 8$.
$$A = \frac{180(n – 2)}{n} = \frac{180(8 – 2)}{8} = \frac{180(6)}{8} = \frac{1080}{8} = 135$$
$$S = 180(n – 2) = 180(8 – 2) = 180(6) = 1080$$
The measures can be summarized in the table below:
| REGULAR POLYGONS | NUMBER OF SIDES | MEASURE OF EACH INTERIOR ANGLE | SUM OF THE MEASURES OF THE INTERIOR ANGLES |
|---|---|---|---|
| TRIANGLE | 3 | 60° | 180° |
| QUADRILATERAL | 4 | 90° | 360° |
| PENTAGON | 5 | 108° | 540° |
| HEXAGON | 6 | 120° | 720° |
| HEPTAGON | 7 | 128.60° | 900° |
| OCTAGON | 8 | 135° | 1080° |
| NONAGON | 9 | 140° | 1260° |
| DECAGON | 10 | 144° | 1440° |
Example 4. A table is shaped like regular quadrilateral. Each side length is represented by the expression on the right. Find the length of each side.
[illustration: square table with sides labeled (6x − 12) in at the top and (8x − 4) in at the right]
Lesson 3
Since the quadrilateral is regular, the sides have equal measures. This implies that we can equate the length of the given sides and solve for the value of $x$.
$$6x + 12 = 8x – 4$$ $$6x – 8x = -12 – 4$$ $$-2x = -16$$ $$\frac{-2x}{-2} = \frac{-16}{-2}$$ $$x = 8$$
We use the value the length of $x$ to evaluate the length of one of the given sides:
$$6x + 12 = 6(8) + 12 = 60$$
Thus, the length of the side of the table is 60 inches.
Lesson 3
SHARPENING YOUR SKILLS
Write your answers on a separate sheet of paper.
I. Identify whether the given figure is a polygon or not. If it is a polygon, classify as convex or concave. If it is not a polygon, explain why.
- [illustration: stop sign shaped as an octagon, with the word STOP]
- [illustration: soccer field viewed from above]
- [illustration: five-pointed star outline with dashed border]
- [illustration: cone]
Lesson 3
II. Classify each polygon below by the number of its sides and determine if it is equilateral, equiangular, or regular. Justify your answer.
- [illustration: octagon with tick marks on its sides and small arcs at its angles]
- [illustration: triangle with 60° labeled at each angle]
- [illustration: quadrilateral ABCD with tick marks on its sides; vertices labeled A (top), B (right), C (bottom), D (left)]
- [illustration: pentagon with 108° labeled at each angle]
- [illustration: isosceles triangle with tick marks on two sides and small arcs at its base angles]
- [illustration: rectangle with right-angle marks, tick marks on its sides]
Lesson 3
TREADING THE road to mastery
Solve the following problems. Place your answers on a separate sheet of paper.
- The base of a jewelry box is shaped like a regular 15-gon. What is the measure of each interior angle of the base of the jewelry box.
- A coin is in the shape of a regular undecagon. Find the sum of the measures of its interior angles.
- A trampoline is shaped like a regular dodecagon. Find the measure of each interior angle.
Don’t Forget
- The undefined terms in geometry are points, lines, and planes.
- A point represents a location in space and is usually represented by a dot.
- A line is a straight path made up of connected points extending to both directions.
- A plane is a boundless flat surface that extends on all sides where points and lines lie on.
- A line segment is a part of a line that has two end points.
- A ray is a part of a line that has one end point and extends on one direction (half-line).
- Parallel lines are lines that do not intersect even when extended without end and are symbolized by “∥”.
- Perpendicular lines are lines that intersect each other forming a right angle (exactly 90°) and are symbolized by “⟂”. These are denoted with a small box at their point of intersection.
- The intersection of two lines is a point. The intersection of two planes is a line.
Don’t Forget
- An angle is a union of two rays sharing a common point called the vertex.
- Angles can be classified according to their measure.
- A right angle has a measure of exactly 90° made by two perpendicular lines.
- An acute angle has a measure greater than 0° but less than 90°.
- An obtuse angle has a measure greater than 90° but less than 180°.
- A straight angle has a measure of exactly 180° whose rays form a straight line.
- A reflex angle has a measure greater than 180° but less than 360°.
- A full angle has a measure of 360° and looks like a circle.
- Complementary angles are a pair of angles whose sum of measurements is 90°.
- Supplementary angles are a pair of angles whose sum of measurements is 180°.
- A plane figure is a figure that lies in a plane.
- A polygon is a closed plane figure that is formed by straight lines.
Don’t Forget
- A polygon is convex if all line segments connecting any pair of vertices do not lie in the exterior of the polygon. A polygon that is not convex is called concave.
- Polygons can also be classified according to the number of sides.
| NUMBER OF SIDES | TYPE OF POLYGON | ILLUSTRATION |
|---|---|---|
| 3 | TRIANGLE | [illustration: triangle] |
| 4 | QUADRILATERAL | [illustration: quadrilateral] |
| 5 | PENTAGON | [illustration: pentagon] |
| 6 | HEXAGON | [illustration: hexagon] |
| 7 | HEPTAGON | [illustration: heptagon] |
Don’t Forget
[transcriber’s note: table continued from the previous page]
| NUMBER OF SIDES | TYPE OF POLYGON | ILLUSTRATION |
|---|---|---|
| 8 | OCTAGON | [illustration: octagon] |
| 9 | NONAGON | [illustration: nonagon] |
| 10 | DECAGON | [illustration: decagon] |
| 11 | UNDECAGON or HENDECAGON | [illustration: undecagon] |
| 12 | DODECAGON | [illustration: dodecagon] |
- An equilateral polygon is a polygon with congruent sides. An equiangular polygon is a polygon in which all interior angles are congruent. A regular polygon is a polygon which is both equilateral and equiangular.
Don’t Forget
The measure of each interior angle of a regular/equiangular polygon can be obtained using the formula
A = 180(𝑛 − 2) / 𝑛
and the sum of the measures of the interior angles is
S = 180(𝑛 − 2)
where 𝑛 is the number of sides.
Explore More
If you wish to study further, here are some additional materials you can refer to:
“Geometry Undefined Terms CCHS” https://www.youtube.com/watch?v=TXKM35oUli0
“Types of Angle” https://www.youtube.com/watch?v=dqg1DQCJa-E
“Parallel & perpendicular lines intro” https://www.khanacademy.org/math/basic-geo/basic-geo-lines/parallel-perp/v/parallel-and-perpendicular-lines-intro
“Draw Angles – Plotting Program” ttps://rechneronline.de/winkel/angles.php
“Parallel Lines, Transversals, and Angles” https://www.youtube.com/watch?v=qTD_z47egHs
Angle graphing tool https://www.visnos.com/demos/basic-angles
Reach the Top
Choose the letter of the correct answer by encircling it and write them on a separate sheet of paper.
Which of the following is not an undefined term in geometry?
a. point b. line c. plane d. ray
It refers to an undefined term in geometry which is an endless and boundless flat surface.
a. ray b. point c. line d. plane
Which of the following is a line segment?
a. [illustration: ray with a dot at its left end and an arrowhead at its right end]
b. [illustration: line with arrowheads at both ends]
c. [illustration: line segment with a dot at each end]
d. [illustration: single dot]What is the intersection of perpendicular lines?
a. point b. ray c. line segment d. line
What pair of lines is represented by the given figure?
[illustration: two parallel lines, each with arrowheads at both ends]
a. adjacent
b. perpendicular
c. parallel
d. vertical
For items 6−8, refer to the figure on the next page.
Reach the Top
What is the intersection of lines PN and MO?
[illustration: lines PN, MO, and LK meeting at point K, with a right-angle mark at K; points L, M, N, P, and O are labeled]
a. point N
b. point K
c. point M
d. point OWhat is the intersection of lines PN and LK?
a. point N
b. point K
c. point L
d. point PWhat type of angle is PKM?
a. acute b. right c. obtuse d. reflex
Which of the following is an example of adjacent angles?
a. [illustration: two adjacent angles marked a and b sharing a side, with an x mark above]
b. [illustration: angle with vertex O, rays OA, OB, and OC labeled]
c. [illustration: two adjacent angles marked a and b sharing a side, with an x mark above]
d. [illustration: two angles marked a and b, with an x mark above]
MODULE 4
- What is the complement of the given angle?
a. 16° b. 36° c. 86° d. 126°
[illustration: angle labeled “a” with a 54° angle marked between a vertical ray and a horizontal ray]
- Find the supplement of 120°.
a. 30° b. 45° c. 50° d. 60°
- What is the measure of a full angle?
a. 90° b. 45° c. 360° d. 180°
- Which of the following is a polygon?
a. [illustration: plus-shaped closed figure] b. [illustration: open figure with crossing segments] c. [illustration: open figure with an angled notch] d. [illustration: rounded rectangle]
- Which of the following best describes a regular polygon?
a. both equiangular and equilateral b. equiangular c. equilateral d. flat
- A table is shaped like a regular pentagon. Each side length is represented by (2𝑥 + 6) inches and (3𝑥 − 3) inches. Find the length of each side.
a. 24 inches b. 18 inches c. 9 inches d. 6 inches
ANSWER KEY
PRE-ASSESSMENT
PAGE 2
- B
- D
- C
- C
- D
- C
- B
- B
- D
- A
- A
- C
- B
- A
- A
LESSON 1: THE FOUNDATIONS OF SHAPES AND FIGURES
TRYING THIS OUT
PAGE 5
- The intersection of the two sticks can be represented with a point.
- (a) The sides of a paper can be represented as line segments.
(b) At point J, lines JK and JM meet.
At point K, lines JK and KL meet.
At point L, lines KL and LM meet.
At point M, lines JM and LM meet.
(c) The sides of the paper that are across each other are the pairs JK & LM and JM & KL.
(d) The sides of the paper will never cross. - (a) The edges of the box can be represented as line segments.
(b) The faces of a box can be represented as planes.
(c) The edges of the box is where the faces of the box meet.
SHARPENING YOUR SKILLS
PAGE 17
ACTIVITY I
- ray CS
- plane LOVE
- line AM or line MA
- PR ⊥ AT
- CR ∥ AT
- line segment PR
ANSWER KEY
TREADING THE ROAD TO MASTERY
PAGE 19
- (a) point E
(b) point C
(c) point C
(d) no intersection - (a) point B
(b) point C
(c) no intersection - (a) no intersection
(b) line p
(c) line q - (a) line a, line FQ, or line FW
(b) point F - (a) point J
(b) point J
(c) point J
(d) line MN
ACTIVITY II
- [illustration: ray with endpoint labeled D, a point labeled U, and an arrowhead pointing right]
- [illustration: rectangle with corners labeled I (top left), N (top right), U (bottom right), and T (bottom left)]
- [illustration: line segment with endpoints labeled T and S]
- [illustration: line with points labeled I and L and arrowheads at both ends]
ACTIVITY III
ZY ⊥ XR MN ⊥ RX MN ⊥ PT YZ ∥ MN RX ∥ PT VW ∥ SU
ANSWER KEY
LESSON 2: HOW OPEN IS IT
TRYING THIS OUT
PAGE 22
A. 50° B. 80° C. 105°
SHARPENING YOUR SKILLS
PAGE 31
ACTIVITY I
- obtuse
- reflex
- acute
- right
- reflex
- right
- reflex
- acute
ACTIVITY II
- [illustration: angle with two rays forming an opening to the left of a vertical ray]
- [illustration: angle with one slanted ray and one horizontal ray]
- [illustration: angle drawn with a dashed arc and arrowheads on both rays]
- [illustration: angle with a slanted ray and a horizontal ray]
- [illustration: angle with a 60° label and a 45° label between rays]
- [illustration: right angle with a 72° label and an 18° label]
ANSWER KEY
TREADING THE ROAD TO MASTERY
PAGE 33
- measure of angle = 45° measure of complement = 45°
- measure of angle = 60° measure of complement = 30°
- measure of angle = 10° measure of complement = 80°
- measure of angle = 125° measure of supplement = 55°
- measure of angle = 115° measure of supplement = 65°
- measure of angle = 145° measure of supplement = 35°
LESSON 3: MANY ANGLES
TRYING THIS OUT
PAGE 35
| FIGURE | CORNERS | FIGURE | CORNERS |
|---|---|---|---|
| [illustration: triangle] | 3 | [illustration: rectangle] | 4 |
| [illustration: pentagon] | 5 | [illustration: hexagon] | 6 |
| [illustration: heptagon] | 7 | [illustration: decagon] | 10 |
SHARPENING YOUR SKILLS
PAGE 44
ACTIVITY I
- polygon, convex
- polygon, convex
- polygon, concave because some pairs of vertices connects at the exterior
- not a polygon because the bottom part is curved
ANSWER KEY
ACTIVITY II
- octagon, regular
- pentagon, regular
- triangle, equiangular
- triangle
- quadrilateral, equilateral
- quadrilateral, equiangular
TREADING THE ROAD TO MASTERY
PAGE 46
- 156°
- 1620°
- 150
REACH THE TOP
PAGE 53
- D
- D
- C
- A
- C
- B
- B
- C
- B
- B
- D
- C
- A
- A
- A
GLOSSARY
Acute Angle An angle that measures greater than 0° but less than 90°
Adjacent Angles A pair of angles that share the same vertex and a common side
Angle A union of two rays sharing a common point
Complementary Angles A pair of angles whose sum is 90°
Concave Polygon A polygon that is not convex
Convex Polygon A polygon whose line segments connecting any pair of vertices do not lie in the exterior of the polygon
Decagon A polygon with exactly ten sides
Dodecagon A polygon with exactly twelve sides
Equiangular Polygon A polygon whose all interior angles are congruent
Equilateral Polygon A polygon whose all sides are congruent
GLOSSARY
Full Angle An angle that measures 360°
Heptagon A polygon with exactly seven sides
Hexagon A polygon with exactly six sides
Line A straight path made up of connected points extending to both directions
Line Segment A part of a line that has two end points
n−gon A polygon with 𝑛 number of sides
Nonagon A polygon with exactly nine sides
Obtuse Angle An angle measuring greater than 90° but less than 180°
Octagon A polygon with exactly eight sides
Parallel Lines Lines that do not intersect even when extended without end; symbolized by “∥”
Glossary
| Term | Definition |
|---|---|
| Pentagon | A polygon with exactly five sides |
| Perpendicular Lines | Lines that intersect to form a right angle (exactly 90°); symbolized by “⊥” |
| Plane | A boundless flat surface that extends on all sides where points and lines lie on |
| Plane Figure | A figure that lies in a plane |
| Point | A location in space that has no dimensions and is represented by a dot (.) |
| Polygon | A closed plane figure that is formed by straight lines |
| Quadrilateral | A polygon with exactly four sides |
| Ray (half-line) | A part of a line that has one end point and extends on one direction |
| Reflex Angle | An angle that measures greater than 180° but less than 360° |
| Regular Polygon | A polygon that is both equiangular and equilatera. |
Glossary
[transcriber’s note: table continued from the previous page]
| Term | Definition |
|---|---|
| Right Angle | An angle that measures exactly 90° made by two perpendicular lines |
| Straight Angle | An angle that measures exactly 180° whose rays form a straight line |
| Supplementary Angles | A pair of angles whose sum is 180° |
| Triangle | A polygon with exactly three sides |
| Undecagon | A polygon with exactly eleven sides |
| Undefined terms | Terms that cannot be defined using other figures; three undefined terms are points, lines, and planes |
| Vertex | A point of intersection of two rays forming an angle |
References
Diaz, Zenaida B., Manalo, Catalina B., Mojica, Maharlika P., Suzara, Josephine L., Mercado, Jesus P., Esparrago, Mirla S., Reyes, Nestor Jr. V. Next Century Mathematics 8. Phoenix Publishing House, Inc. 2013
Favila, Raymundo A., Villarmil, Ma. Mauricia L. Geometry Metric Edition. 1984
Carasco, Jester. Types of Angles, accessed August 25, 2019, https://www.basic-mathematics.com/types-of-angles.html.
Pierce, Rod. (2019). Angle Definition, accessed August 25, 2019, https://www.mathsisfun.com/definitions/angle.html.
Varsity Tutors. (2019). Parallel Lines and Proportionality, accessed August 25, 2019, https://www.varsitytutors.com/hotmath/hotmath_help/topics/parallel-lines-and-proportionality.
Yordan, Petrov. (2019). Types of Angle Pairs, accessed August 25, 2019, https://www.math10.com/en/geometry/angles/angles.html.
The development and printing of this learning resource was made possible with the cooperation of Asia Pacific College. This is a component of the project “Better Life for Out-of-School Girls to Fight Against Poverty and Injustice in the Philippines” implemented by UNESCO Office, Jakarta in partnership with the Department of Education. This initiative received a generous financial support from Korea International Cooperation Agency (KOICA).
For inquiries, please contact:
Department of Education, Bureau of Learning Resources (DepEd BLR)
Office Address : Ground Floor, Bonifacio Building, DepEd Complex, Meralco Avenue, Pasig City, Philippines 1600
Telefax : +63-2-8631-1072; +63-2-8634-1054; +63-2-8631-4985
Email Address : blr.qad@deped.gov.ph; blr.lrpd@deped.gov.ph
Leave a Reply